Intex CL1704 Manual de Usario

Intex aspiradora CL1704

Lee a continuación 📖 el manual en español para Intex CL1704 (5 páginas) en la categoría aspiradora. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

(286PO) RECHARGEABLE HANDHELD VACUUM ENGLISH SIZE: 4.875” X 7.25” 10/21/2019

286

SAVE THESE INSTRUCTIONS

Page 1 286-*PO-R0-2011

INTEX® OWNER'S MANUAL

RECHARGEABLE HANDHELD VACUUM

Model CL1704

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

• Assembly and disassembly by adults only.

• This is not a toy. Do not allow children to play with this product.

• Do not use if unit is damaged in any way. Replace damaged components promptly.

• This vacuum creates suction. Keep hair, loose clothing, fingers, and any body parts

away from openings and moving parts.

• Use only accessories and replacement parts specified in this manual.

• Never leave this product plugged into the main outlet for long term storage.

• Never leave this product in the water when it is OFF or has run out of battery power.

• Do not use this product for pool opening (start of the season). This product is design

for routine general maintenance of your pool or spa. Do not use for cleaning of longer

accumulated heavy dirt such as at the start of the pool season.

• This product is designed for underwater use: must be submerged to operate properly.

Do not use this product as an all-purpose vacuum cleaner.

• Do not use this product without the filter bag and/or vacuum body cover.

• Do not vacuum sharp objects, as this may damage the filter bag.

• Do not vacuum toxic substances, flammable or combustible liquids such as gasoline, or

operate in the presence of explosive or flammable fumes.

• Never insert or drop objects into any opening on the device. Keep all openings free of

leaves, debris, or anything that may reduce the water flow.

• Always turn off and unplug the device before cleaning, servicing, changing the filter bag

or any routine maintenance.

• Keep the charging USB cable away from sharp objects and hot surfaces.

• Do not charge the product with a damaged charging USB cable and/or a damaged plug

charger.

• Charge the product indoors in a clean and dry place. Do not expose to rain or extreme

temperature and do not handle with wet hands during charging. Never charge the

product while operating it.

• This product contains sealed nickel metal-hydride (Ni-MH) rechargeable batteries.

Do not dispose of product in regular trash, municipal waste stream or by fire as the

built-in rechargeable battery may leak or explode. Always dispose of the batteries in

accordance with your local law and regulations.

• This product is intended to be used only for the purposes described in the manual.

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID PROPERTY DAMAGE

OR OTHER INJURY.

WARNING

(286PO) RECHARGEABLE HANDHELD VACUUM ENGLISH SIZE: 4.875” X 7.25” 10/21/2019

286

SAVE THESE INSTRUCTIONS

Page 2

PARTS LIST

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

REF. NO.

DESCRIPTION QTY.

SPARE PART NO.

VACUUM BODY WITH NON-REPLACEABLE BATTERY

1 12271A

2 1 12278FILTER BAG WITH GASKET

3 1 12277VACUUM BODY COVER

4 1 12274LARGE VACUUM BRUSH HEAD

5 1 12275VACUUM NOZZLE

6 1 12276VACUUM NOZZLE BRUSH

7 1 12279MICRO-FILTER BAG

8 1 12269VACUUM CHARGING USB CABLE

9 1 10637TELESCOPING ALUMINUM POLE

10 1 12270POLE ADAPTOR

General:

• Plug charger not included. Only use a compatible standard female USB (smartphone or

tablet) plug charger with an output voltage of 5-5.2V DC, 1A.

• A full charge takes about 8-10 hours: provides about 40-50 minutes of operation.

• Make sure the charging receptacle on the product is dry before any recharging.

Charging the Battery:

1. Connect USB cable to plug charger USB receptacle and

plug the charger into the main electrical outlet.

2. Connect the small end of the USB cable (8) into the

vacuum body (1) charging receptacle. See fig 1.

The indicator light will turn on.

Installation:

1. Insert the filter bag with gasket (2) into the vacuum body

(1). See fig 2.1.

Fig 1

(286PO) RECHARGEABLE HANDHELD VACUUM ENGLISH SIZE: 4.875” X 7.25” 10/21/2019

286

SAVE THESE INSTRUCTIONS

Page 3

For vacuuming fine-small particles, insert the micro-filter bag

(7) into the filter bag (2)

before inserting the filter bag (2) into the vacuum body (1). See fig 2.2.

2. Install the vacuum body cover

(3) onto the vacuum body (1). Turn the cover (3) clockwise

to securely lock it to the vacuum body. See fig 3.

3. Attach the desired cleaning head accessory to the vacuum body cover. See fig 4.

Note: The ridge on the vacuum body cover

(3) matches the groove on the end of the

vacuum brush head (4) or vacuum nozzle (5).

Fig 2.1 Fig 2.2 Fig 3

Fig 5

Fig 4

4. Attach the aluminum pole

(9) by squeezing the spring buttons and inserting into handle

of the vacuum body (1). Check the buttons “pop” into the holes. Adjust the length of the

shaft by unlocking, extending and locking each section accordingly. See fig 5.

Optional: The included pole adaptor (10) can be used with other sizes of extension

poles.

Especificaciones del producto

Marca:	Intex
Categoría:	aspiradora
Modelo:	CL1704
Color del producto:	Zwart
Ancho:	205 mm
Profundidad:	376.5 mm
Altura:	442 mm
Amable:	PC
factor vorm:	Midi Tower
Interruptor-encendido-/-apagado:	Ja
Adecuado para:	Gamen
Ubicación de la iluminación:	Voorkant
Entradas de audio:	Ja
Salida de audio:	Ja
Material:	Acrylonitrile Butadiene Styrene (ABS), SPCC
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Color de la iluminación:	Blue, Green, Red
Botón de reinicio:	Ja
Fuente de alimentación incluida:	Nee
Número de bahías de 2,5":	3
Número de bahías de 3,5":	2
Tamaños de disco duro admitidos:	2.5, 3.5 "
Número de ranuras de expansión:	7
Gestión de cables mejorada:	Ja
Exposición:	Ja
Grosor del material:	0.5 mm
Filtro antipolvo:	Ja
Factores de forma de placa base compatibles:	ATX, Micro ATX, Mini-ITX
Ventana lateral:	Ja
Altura máxima del refrigerador de la CPU:	159 mm
Longitud máxima de la tarjeta gráfica:	302 mm
Número máximo de ventiladores frontales:	2
Diámetros de soporte de ventiladores frontales:	120,140 mm
Número máximo de fans en la cima.:	1
Diámetros de soporte de ventiladores superiores:	120 mm
Número máximo de ventiladores traseros:	1
Diámetros de soporte de ventiladores traseros:	120 mm
Ventiladores traseros instalados:	1x 120 mm
Factores de forma de fuente de alimentación admitidos:	ATX
Capacidad de refrigeración líquida:	Ja
Dimensiones del radiador delantero soportado:	120,240 mm
Dimensiones del radiador trasero soportado:	120 mm