Invicta Bolt 27496 Manual de Usario

Invicta Mirar Bolt 27496

Lee a continuación 📖 el manual en español para Invicta Bolt 27496 (31 páginas) en la categoría Mirar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/31
INSTRUCT ON MANUALI AND WARRANTY
THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE
Long ago, we set out to continue Invicta’s original 1837 mission – to offer
magnificent Swiss timepieces at modest prices. In doing so, we gave birth
to a movement in the watch industry that is turning the balance of power
over to the consumer.
We hope you enjoy your new timepiece and carefully read the easy-to-use
instructions pertaining to it. By doing so, you will help give it a long life and
keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain
the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified
watchmaker to ensure the gaskets are in proper condition. This will help to
assure the precise operation and longevity of the piece. Please refer to our
Service Center information on our web site www.invictawatch.com.
QUARTZ, A MUTO AT
QUARTZ, A M IC, UTO AT
AN IND W MANUAL D WATCHES
A Quartz Watch is battery powered and does not require winding.
Eventually the battery will need to be replaced.
An Automatic Watch is a mechanical watch that winds itself and does
not require a battery. When worn daily, the movement of your wrist causes
the mainspring to wind progressively, eliminating the need for additional
winding. To start your automatic, you can hand wind it by rotating the
crown clockwise a number of turns while in its normal operating position
(screw down crowns will need to be unscrewedrst), or by swinging it side
to side for 30 seconds. We recommend housing an automatic in a watch
winder box.
A Manual Wind Watch is a mechanical watch that does not require a
battery, but can only be wound by hand. To wind it, turn the crown clock-
wise while it is in its normal operating position until you feel resistance.
This type of watch should be wound daily.
2

Especificaciones del producto

Marca: Invicta
Categoría: Mirar
Modelo: Bolt 27496
Color del producto: Black, Red
Ancho: 223.6 mm
Profundidad: 555 mm
Altura: 696 mm
Amable: PC
factor vorm: Full Tower
Número de puertos USB 2.0: 2
Adecuado para: Gamen
Entradas de audio: Ja
Salida de audio: Ja
Material: SECC, Steel
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A: 4
Fuente de alimentación incluida: Nee
Número de bahías de 2,5": 2
Número de bahías de 5,25": 3
Número de bahías de 3,5": 12
Número máximo de HDD por gabinete: 17
Tamaños de disco duro admitidos: 2.5, 3.5 "
Número de ranuras de expansión: 9
Código del Sistema Armonizado (SA): 84733080
Ubicación de la fuente de alimentación: Bodem
Factores de forma de placa base compatibles: ATX, CEB, EATX
Ventana lateral: Ja
Altura máxima del refrigerador de la CPU: 175 mm
Longitud máxima de la tarjeta gráfica: 330 mm
Número máximo de ventiladores frontales: 3
Diámetros de soporte de ventiladores frontales: 120 mm
Número máximo de fans en la cima.: 2
Diámetros de soporte de ventiladores superiores: 120 mm
Número máximo de ventiladores traseros: 1
Diámetros de soporte de ventiladores traseros: 120 mm
Ventiladores traseros instalados: 1x 120 mm
Número de ventiladores frontales instalados: 3x 120 mm
Capacidad de refrigeración líquida: Ja
Ventiladores instalados arriba: 2x 120 mm

¿Necesitas ayuda?

Si necesitas ayuda con Invicta Bolt 27496 haz una pregunta a continuación y otros usuarios te responderán




Mirar Invicta Manuales

Mirar Manuales

Últimos Mirar Manuales