Ion Block Party Manual de Usario
Lee a continuación 📖 el manual en español para Ion Block Party (20 páginas) en la categoría Oradores. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/20
BLOCK PARTY
Quickstart Guide
English ( 2 – 3 )
Guía de inicio rápido
Español ( 4 – 5 )
Guide d'utilisation rapide
Français ( 6 – 7 )
Guida rapida
Italiano ( 8 – 9 )
Kurzanleitung
Deutsch ( 10 – 11 )
Snelstartgids
Nederlands ( 12 – 13 )
Snabbstartsguide
Svenska ( 14 – 15 )
Pikakäyttöopas
Suomi ( 16 – 17 )
Appendix
English ( 18 )
2
Quickstart Guide (English)
Support
For product registration, visit the ION website: ionaudio.com
For the latest information about this product, visit
ionaudio.com/blockparty
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit ionaudio.com/warranty
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light.
Do not sit, stand, or apply pressure on the dome light.
Rechargeable Batteries
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this
battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years.
Here are some recommendations for getting the longest life from the internal battery.
GENERAL USAGE
• FULLY CHARGE THE BATTERY BEFORE USING IT.
• CHARGE THE BATTERY COMPLETELY AFTER EACH USE.
STORAGE
• For best product longevity, do not store at exceedingly hot (greater than 90F (32C)) or exceedingly cold
(less than 32F (0C)) temperatures.
• It is acceptable to leave your sound system plugged in. This will not overcharge the battery.
• If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.
REPAIR
• If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still
will not charge, contact ION Audio at ionaudio.com.
DISPOSAL
• Bring the unit to a recycling center or dispose of in accordance with local ordinances.
Quick Setup/Connection Diagram
1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. For optimal performance, place Block Party in the center of the room so it is unobstructed by walls, furniture,
etc.
4. Move Light Mode switch to OFF.
5. Turn down the Master Volume on the Block Party.
6. Turn on Block Party.
7. Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more
details on this)
8. Adjust the volume on your music player and on Block Party as needed.
9. Adjust the Light Mode switch on Block Party as needed.
10. Turn off Block Party when not in use.
BOX CONTENTS
Block Party
Microphone with mic cable
Audio Cable with 1/8” (3.5mm)
connectors
Power Cable (standard IEC)
Quickstart Guide
Safety Instructions & Warranty
Information Booklet
TOP PANEL
MICROPHONE
MP3 PLAYER
(not included)
MICROPHONE
REAR PANEL
POWER
3
Diagram and Parts Description
1. Microphone Input with Volume
Control (1/4"): This mono input
accepts a 1/4" input such as a
microphone, guitar, or other musical
instrument.
2. Auxiliary input: This stereo 1/8”
input can be used to connect a
smartphone, MP3 player, or other
audio source.
3. Bluetooth: The Paired LED will be
lit when a device is paired to Block
Party. This LED will not be lit when
Block Party is first powered on
(unless it was previously paired with a device). Press the
Disconnect button to disconnect a paired Bluetooth
device.
4. Master Volume Control: This adjusts the speaker’s
main mix volume, which includes Microphone Input,
Auxiliary Input, and the audio of a paired Bluetooth device.
5. Power LED: Indicates whether Block Party is on or off.
6. Light Mode: There are three modes to select from for how the
strobe lights react to the music.
• Beat = the light reacts to the beat of the music.
• Party = dome light spins and changes color whether there
is music playing or not.
• Off = the light is off and the lights in the dome are not
spinning.
7. Dome: The dome light can spin and react to the music playing
(depending on the Light Mode that is selected).
8. Power Cable Input (IEC): Insert the included power cable here
to power the unit.
9. Power ON/OFF Switch: Turns Block Party on or off.
10. Battery Level Indicator: While the unit is powered ON and the
unit is not plugged in, these four lights indicate the power left in
the battery. Battery life varies based on volume and usage.
11. Charging LED – This illuminates when the unit is attached to
wall power and is in the process of charging.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to
reduce the overall volume of Block Party.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This
will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If you can’t hear the microphone over the music volume: Turn down the music volume from your source.
Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Block Party and it will automatically go into pairing mode to search for Bluetooth devices. You will
know you are in pairing mode when the LED is off.
3. If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break
previous Bluetooth connections and reset the Bluetooth module.
4. Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.
5. The Paired LED will light up solid when it is 'paired'.
Note: If you experience trouble pairing or playing music, update your device's OS.
6. To disconnect pairing, press the ‘Disconnect’ button on Block Party.
7. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.
1
24
5
6
7
3
10
10
11
11
98
Especificaciones del producto
| Marca: | Ion |
| Categoría: | Oradores |
| Modelo: | Block Party |
¿Necesitas ayuda?
Si necesitas ayuda con Ion Block Party haz una pregunta a continuación y otros usuarios te responderán
Oradores Ion Manuales
16 Octubre 2024
16 Octubre 2024
19 Julio 2024
19 Julio 2024
Oradores Manuales
- Oradores JBL
- Oradores Onkyo
- Oradores Pioneer
- Oradores Yamaha
- Oradores Albrecht
- Oradores Amazon
- Oradores Harman Kardon
- Oradores Telestar
- Oradores Auna
- Oradores Numark
- Oradores Magnat
- Oradores Pure Acoustics
- Oradores Peaq
- Oradores Veho
- Oradores Beats
- Oradores IHome
- Oradores Skytec
- Oradores Dali
- Oradores Dymond
- Oradores XtremeMac
- Oradores Noxon
- Oradores REL Acoustics
- Oradores Konig Electronic
Últimos Oradores Manuales
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024
5 Octubre 2024
5 Octubre 2024
5 Octubre 2024
5 Octubre 2024
23 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024