Ion Vinyl Mot Manual de Usario

Ion Equipo de DJ Vinyl Mot

Lee a continuación 📖 el manual en español para Ion Vinyl Mot (32 páginas) en la categoría Equipo de DJ. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/32
Quickstart Guide English ( 2 – 6 )
Guía de inicio rápido Español ( 7 – 11 )
Guide d'utilisation rapide Français ( 12 – 16 )
Guida rapida Italiano ( 17 – 21 )
Schnellstart-Anleitung Deutsch ( 22 – 26 )
Snelstartgids Nederlands ( 27 – 31 )
Vinyl Motion™
2
ON
OFF
78
45
33
STOP
AUTO
ON
OFF
78
45
33
STOP
AUTO
Quickstart Guide (English)
Introduction
Box Contents
Make sure that the items listed below are included in the box:
• Vinyl Motion™
• USB Cable
• Felt Slipmat
• 45 RPM Adapter
• Software CD
• Quickstart Guide
• Safety & Warranty Manual
Safety Information
• Not for use in rain or wet locations. Use only in dry locations.
• Play the turntable only on a level surface.
• The turntable cover must be open when playing records.
• Close the turntable cover when not playing records.
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit ionaudio.com.
Connection Diagram
Items not listed under the Box Contents are sold separately.
Use the included USB cable to connect Vinyl Motion to (A) a 5V USB power adapter connected to a power
outlet or (B) your computer.
(A) (B)
Charge or
Power
Computer
USB Power
Adapter (not
included)
3
Features
1. Platter – Place your
record here.
2. 45 RPM Adapter Holder
– Holds the included 45
RPM adapter. When not
using the adapter, please
place it in this holder.
3. Tonearm – The fixed
tonearm can be raised
and lowered by hand, or
by pressing the raise /
lower lever.
4. Arm Clip – This specially
designed arm clip secures
the tonearm while at rest
or when not in use. The
arm clip has been
designed to remain in the
up position while
unlocked.
5. Raise / Lower Lever –
Raises and lowers the tonearm.
6. 33 / 45 / 78 Switch – This switch controls the RPM of
the turntable platter.
Note: For best results when playing 78 RPM vinyl
records, use a 78 stylus (sold separately). Only use a
78 stylus with 78 RPM vinyl records. Purchase the
iCT06rs 78 stylus at ionaudio.com/ict06rs.
7. Autostop switch – This switch turns autostop on or
off. When autostop is on, the platter will start spinning
when the tonearm is placed over the record and stop
spinning when the record has reached the end. (When
autostop is off, the platter will always spin regardless
of the position of the tonearm.)
Note: If your vinyl record stops before it reaches the
end of the music, turn Autostop to the off position for this particular
record. This is generally recommended for 45 RPM records.
8. Volume/Power Knob – To power on Vinyl Motion, turn this knob
clockwise until it clicks. When powered on, use this knob to adjust the
volume for the internal speakers and headphones. To turn off Vinyl
Motion, turn this knob counterclockwise until it clicks.
9. Headphone Output – Connect headphones here (sold separately) to listen to your vinyl.
10. Battery Charging Indicator – The LED will illuminate when charging the battery. The LED will turn off
once the battery is fully charged.
11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is
depleted.
12. Speaker – The record's audio will be played through this built-in speaker.
13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8” stereo
auxiliary input.
14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This
must not be connected to phono level devices.
15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB
connection will send audio from the turntable to your computer. Please see the Using Vinyl Motion
With Your Computer section of this manual for information. Also, use the included USB cable to
connect Vinyl Motion to a USB power adapter connected to a power outlet or your computer.
IMPORTANT: Remove the plastic cartridge
cover (needle cover) before operating the
turntable.
*WARNING: The RCA outputs are LINE level.
Please only connect these to LINE level
inputs. You may damage your receiver if you
plug in a LINE level device into a PHONO
level input.
14 15
ON
OFF
78
45
33
ST OP
AUT O
1
23
45
7
6
8
9
10
12
11
12
13
IMPORTANT: Place the included felt slipmat
on the platter; then place your record on the
felt slipmat to carefull
y
hold
y
our records.

Especificaciones del producto

Marca: Ion
Categoría: Equipo de DJ
Modelo: Vinyl Mot

¿Necesitas ayuda?

Si necesitas ayuda con Ion Vinyl Mot haz una pregunta a continuación y otros usuarios te responderán


Equipo de DJ Ion Manuales

Ion

Ion Vinyl Mot Manual de Usario

15 Agosto 2024

Equipo de DJ Manuales

Últimos Equipo de DJ Manuales

Line 6

Line 6 Helix Control Manual de Usario

27 Octubre 2024
Line 6

Line 6 HX Effects Manual de Usario

15 Octubre 2024
Korg

Korg DT-10 Manual de Usario

8 Octubre 2024
Tascam

Tascam XS-3 Manual de Usario

2 Octubre 2024
Behringer

Behringer PSU11-UL Manual de Usario

2 Octubre 2024
Numark

Numark Scratch Manual de Usario

2 Octubre 2024
Pioneer

Pioneer DJM-750MK2 Manual de Usario

2 Octubre 2024
Audio-Technica

Audio-Technica AT-VM95EN Manual de Usario

29 Septiembre 2024
Karcher

Karcher RR 5140BT Manual de Usario

29 Septiembre 2024
Korg

Korg OT-120 Manual de Usario

27 Septiembre 2024