Irritrol 700DK-1-LF Manual de Usario

Irritrol No categorizado 700DK-1-LF

Lee a continuación 📖 el manual en español para Irritrol 700DK-1-LF (7 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/7
®
Drip Zone Valve Kits
Installation Instructions
Click on the links to view the documents.
Drip Zone Valve Kit
Models 2500DK-1-LF and 2500DK-1-MF
Installation Instructions
373-0512 Revision B
Drip Zone Valve Kit
Models 2711APRDK-LF and 2711APRDK-MF
Installation Instructions
373-0513 Revision B
Drip Zone Valve Kit
Models 2713APRDK-LF and 2713APRDK-MF
Installation Instructions
373-0514 Revision B
Drip Zone Valve Kit
Models 700DK-075-LF
Installation Instructions
373-0515 Revision B
Drip Zone Valve Kit
Models 700DK-1-LF and 700DK-1-MF
Installation Instructions
373-0516 Revision B
Drip Zone Kit - Less Valve
Models DK-LV-LF and DK-LV-MF
Installation Instructions
373-0535 Revision A
®
Get more doneTM
Drip Zone Valve Kit
Models 2500DK-1-LF and 2500DK-1-MF
Installation Instructions
Kit Components
• Irritrol 2500 Series Valve, Model 2500TF
• Pressure Regulator - 25 psi at 0.1–8 GPM,
3/4" Female NPT (Low Flow [LF] model)
• Pressure Regulator - 25 psi at 2–20 GPM,
3/4" Female NPT (Medium Flow [MF] model)
• 3/4" MPT x MPT F Series Y-filter, 150 Mesh Screen
• Drip Line Compression Adapter, CA-710
• 1" x 3/4" Male NPT Reducer Bushing
• 3/4" MPT x 1/2" Slip Fitting
Specifications
• Downstream Pressure Regulation: 25 psi
• Flow Rate at 25 psi: (LF Model) 0.1–8 GPM
(MF Model) 2–20 GPM
• Filtration: 150 Mesh Stainless Steel Screen
• 1" In-line Electric Control Valve, Model 2500TF
Operating Pressure: 10–150 psis
24 VAC, 50/60 Hz Solenoids
Inrush: 0.40 amp, 9.6 VA s
Holding: 0.20 amp, 4.8 VA s
Manual On/Off - Internal and External Bleeds
Adjustable Flow Controls
Installation Procedure
CAUTION: When assembling the drip zone valve kit components, use just 1 ½ to 2 turns of PTFE tape on male
threads. Never use pipe dope. To achieve a leak-free thread connection, turn the male fitting until it is finger-
tight, and then add one or two more turns. Over-tightening can cause splitting and failure of the female threads.
Important: Ensure the Y-filter, control valve and pressure regulator are installed in the correct flow
orientation. Flow direction arrows are provided on each component. Refer to Figure 1.
1. Thread the Y-filter inlet into the valve outlet with
the provided 1" x 3/4" NPT reducer bushing. Use
PTFE tape on all threaded connections. Angle the
Y-filter slightly downward as shown in Figure 1.
2. Thread the pressure regulator inlet into the Y-filter
outlet.
3. Connect the water source supply line and piping
to drip emitters.
NOTE: Installing the valve assembly below grade
in a valve box is recommended for protection and
ease of service.
NOTE: Refer to the 2500TF Series Valve
Instruction Guide provided in the kit for complete
valve installation and operation information.
NOTE: To adapt the Drip Zone Valve Kit for
dripline applications, install the provided 3/4" MPT
x 1/2" Slip fitting and CA-710 dripline compression
adapter to the pressure regulator outlet.
4. Flush the system to remove debris.
5. To determine the recommended minimum/
maximum number of drip emitters per control
valve, refer to the table below.
2500TF Series Valve
Valve Box
Reducer
Bushing
Y-filter
Pressure
Regulator
3/4" MPT x
1/2" Slip
Compression Adapter
(Use with Flex Tube only)
To Emitters From Source
Figure 1
Table 1
© Irritrol • www.irritrol.com • For Technical Assistance, call 1-800-333-3125 Part Number 373-0512 revision B
®
Get more doneTM
Drip Zone Valve Kit
Models 2711APRDK-LF and 2711APRDK-MF
Installation Instructions
Kit Components
• Irritrol 2700 Series Valve, Model 2711APR
• Pressure Regulator - 25 psi at 0.1–8 GPM,
3/4" Female NPT (Low Flow [LF] model)
• Pressure Regulator - 25 psi at 2–20 GPM,
3/4" Female NPT (Medium Flow [MF] model)
• 3/4" MPT x MPT F Series Y-filter, 150 Mesh Screen
• Drip Line Compression Adapter, CA-710
• 3/4" MPT x 1/2" Slip Fitting
Specifications
• Downstream Pressure Regulation: 25 psi
• Flow Rate at 25 psi: (LF Model) 0.1–8 GPM
(MF Model) 2–20 GPM
• Filtration: 150 Mesh Stainless Steel Screen
• 3/4" Anti-siphon Electric Control Valve, Model 2711APR
Operating Pressure: 10–150 psis
24 VAC, 50/60 Hz Solenoids
Inrush: 0.40 amp, 9.6 VA s
Holding: 0.20 amp, 4.8 VA s
Manual On/Off - Internal and External Bleeds
Adjustable Flow Controls
Installation Procedure
CAUTION: When assembling the drip zone valve kit components, use just 1 ½ to 2 turns of PTFE tape on male
threads. Never use pipe dope. To achieve a leak-free thread connection, turn the male fitting until it is finger-
tight, and then add one or two more turns. Over-tightening can cause splitting and failure of the female threads.
Important: Ensure the Y-filter, control valve and pressure regulator are installed in the correct flow
orientation. Flow direction arrows are provided on each component. Refer to Figure 1.
1. Thread the Y-filter inlet into the valve outlet. Use
PTFE tape on all threaded connections. Angle the
Y-filter slightly downward as shown in Figure 1.
2. Thread the pressure regulator inlet into the Y-filter
outlet.
3. Connect the water source supply line and piping
to drip emitters.
NOTE: Refer to the 2711APR Series Valve
Instruction Guide provided in the kit for complete
valve installation and operation information.
NOTE: To adapt the Drip Zone Valve Kit for
dripline applications, install the provided 3/4" MPT
x 1/2" Slip fitting and CA-710 dripline compression
adapter to the pressure regulator outlet.
4. Flush the system to remove debris.
5. To determine the recommended minimum/
maximum number of drip emitters per control
valve, refer to the table below.
2711APR
Valve
NOTE: The valve must be
installed at least 6" above the
highest emitter it controls.
Y-filter
Pressure
Regulator
3/4" MPT x 1/2" Slip
Compression Adapter
(Use with Flex Tube only)
To Emitters
From Source
Figure 1
Table 1
© Irritrol • www.irritrol.com • For Technical Assistance, call 1-800-333-3125 Part Number 373-0513 revision B

Especificaciones del producto

Marca: Irritrol
Categoría: No categorizado
Modelo: 700DK-1-LF

¿Necesitas ayuda?

Si necesitas ayuda con Irritrol 700DK-1-LF haz una pregunta a continuación y otros usuarios te responderán


No categorizado Irritrol Manuales

Irritrol

Irritrol 205TF Manual de Usario

9 Octubre 2024
Irritrol

Irritrol 700DK-1-LF Manual de Usario

6 Octubre 2024
Irritrol

Irritrol 100P1.5-S Manual de Usario

20 Septiembre 2024
Irritrol

Irritrol 100P3 Manual de Usario

10 Septiembre 2024
Irritrol

Irritrol 2507TF Manual de Usario

10 Agosto 2024
Irritrol

Irritrol 100P1-S-KIT Manual de Usario

10 Agosto 2024
Irritrol

Irritrol 100P3-S-KIT Manual de Usario

9 Agosto 2024
Irritrol

Irritrol 100P2-S Manual de Usario

9 Agosto 2024
Irritrol

Irritrol 100P1-S Manual de Usario

26 Julio 2024
Irritrol

Irritrol 2500TF Manual de Usario

21 Julio 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024