Jablotron BM-01 Nanny Manual de Usario
Jablotron
monitor de bebé
BM-01 Nanny
Lee a continuación 📖 el manual en español para Jablotron BM-01 Nanny (2 páginas) en la categoría monitor de bebé. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2

Baby monitor BM-01A “Nanny“ 4/4 MFV51303 Baby monitor BM-01A “Nanny“ 1/4 MFV51303
• Do not use a mattress made of hard material such as expanded polystyrene – it may
result in the failure of the device (such materials are extremely sensitive to air
movements).
• Please be aware that the device can only warn you in the case of an emergency. If
the baby has a medical problem, it is up to you or a doctor to help.
• Manufacturer provides warranty for the product itself. The warranty is not valid for
batteries and manufacturer is not responsible if the product is not used according to
this manual.
Battery replacement
If the batteries are low, the yellow indicator will flash and there will be no beep sound
after it is tuned on. In this case replace the batteries. Use only 2 new size AA alkaline batteries
(orientation is clearly marked in the battery compartment). Switch the Nanny on after battery
replacement and you should hear a beep sound. If there is no beep, check the batteries.
Maintenance and cleaning
The Nanny does not require any regular maintenance. Regular testing of the device is
recommended (once a week).
Use a soft wet cloth to clean the device when necessary (no aggressive cleaning agent
should be used). Avoid water or any other liquid getting inside the control unit or inside the
sensor pad. Protect the sensor pad from physical damage (impacts, falls, bending etc. can
damage the sensor).
Specifications:
Power 3 V, 2x 1,5 V size AA alkaline batteries
Stand by consumption 0.2 mA
Average battery life time 6 months (frequent testing makes it shorter)
Recommended weight of user from min. 2 kg to max. 15 kg
Sensor pad model BM-01D, size max. 350 x 550 x 15 mm,
weight 1500 g, made of PVC-P
Control unit size max. 135 x 70 x 35 mm, weight 150 g, made of ABS
Working environment +5°C to +35°C, rel. humidity 30% to 75%
Storage environment 0°C to +40°C, rel.humidity 10% to 85%
Lifetime of the product 2 years.
Contents: sensor pad, control unit, extension cable, splitting connector.
Conformity assessment was accomplished by the Notified Body No.1014.
It was also approved by the Ministry of Health Care of the Czech Republic under registration number
564B/02 and 564C/02.
Hereby, Jablotron Ltd., declares that this BM-01 is in compliance with the essential requirements
and other relevant provisions of Directive 1993/42/EC.
Original of the conformity assessment can be found at the web page
www.jablotron.cz, section Technical support.
Note: Dispose of batteries safely depending on the type of the batteries
and local regulation. Although this product does not contain any harmful
materials we suggest you to return the product to the dealer or directly to
the producer after usage.
BM-01A “Nanny“ Baby Monitor
Congratulations to you and your newborn baby and to your wisdom in
purchasing the ”Nanny”. Not only will your child be sleeping peacefully!
Description
The BM-01 „Nanny“ continuously checks your baby’s breathing and movements
to confirm the absence of a possible danger. The Nanny triggers an acoustic and
visual alarm if breathing stops for longer than 20 seconds or if the rate of breathing
is bellow 8 breaths per minute. This allows for Apnea (Sudden Infant Death
Syndrome) and other life threatening conditions to be indicated in time to save the
child.
The BM-01 sensor pad, positioned under the bed’s mattress, detects the gentle
movements of an infant’s chest. Signals from the sensor go to the control unit, which
confirms regular breathing or movements. The device has no physical contact with
the baby and it also does not generate any form of energy. So it cannot have any
harmful effect to the human body.

Baby monitor BM-01A “Nanny“ 2/4 MFV51303 Baby monitor BM-01A “Nanny“ 3/4 MFV51303
Installation
1. Place the sensor pad on the bed bottom as shown in the diagram. Place
the mattress on the sensor pad and be sure that the sensor is well positioned
with the mattress using the following guidelines:
• Center of the sensor pad should be approximately in the position of where the
baby’s chest will be
• Pad should be on a smooth & solid surface – It should not be bent!!.
• If there is only a spring grid supporting the bed, place a solid board (wood,
plywood etc.) between the pad and the spring grid.
• If you want to use the Nanny in multiple beds, use extra sensor pads (item number
BM-01D). Install them in each bed and change only the location of the control unit.
• Up to two sensor pads can be used in each bed with a single control unit if the
child is large.
2. Connecting batteries to the control unit (battery compartment is on the rear
side of the control unit):
• Use only 2 new size AA alkaline batteries.
• Polarity of the batteries is clearly marked in the battery compartment.
• Close the battery cover and turn the switch to position I.
• If the batteries are OK, you will hear a beep and the indicators will flash.
• Switch the unit OFF again (position 0)
• If there is no beep after turning ON, check the batteries.
3. Attaching the control unit to the bed – using the fastening belt
• The unit should be visible and should not by covered by anything
• For bigger children we recommend to locate the unit out of their reach
4. Connecting the sensor’s cable to the unit – you should hear a click
• Route the cable in such a way that there is no slack long enough to make a loop.
For bigger children the cable should be out of their reach
• If you do not use the entire length of the cable, fix the excess firmly under the
mattress.
• If you position the control unit in another room, use the extension cable (5m),
which is provided with the set. Only one extension cable can be used.
• If you use two sensor pads in a bed, a cable splitter is provided in the set.
• To disconnect the cable from the unit – press the connector tab towards the cable
Switch and Indicators
Switch – position 0 = OFF, I = ON
Red indicator – flashing when there is an ALARM
Green indicator – a short flash indicates a breath or a movement of the baby
Yellow indicator – flashing indicates low batteries
Operation
A. Put the baby to bed.
B. Turn on the unit (confirmed by a beep and a flash of all LED indicators)
C. The green led indicator will flashes as the baby breathes or moves
D. Turn off the unit before you take the baby out of the bed.
ALARM
If the baby is not breathing for longer than 20 seconds, or the breath rate is too slow, an
alarm signal will sound and the red indicator will flash.
Check the baby and provide first aid if necessary (make sure that there are no reasons
for choking, start resuscitation, call for emergency help). In some cases of Apnea the sound of
the unit itself can wake the baby up and he/she will start to breath again on his/her own.
Alarm can be stopped by the switching the unit off.
There may be rare cases of false alarms, especially when the child is crawling and moves
off the sensor pad.
Testing
You can test function of the Nanny in the following way (should be tested once a week):
1. If the baby is in the bed and the unit is ON, the green indicator should flash as the
baby is breathing or moving.
2. Leave the unit ON and take the baby out of the bed.
• The green indicator may continue to blink for a certain time (vibrations of
the bed caused by the baby’s removal)
• Do not hold or touch the bed – the device may detect your breathing
3. When the flashing has stopped for 20 seconds, the unit will make warning beeps and will
start the alarm sound
• The red indicator should flash when the alarm is triggered.
• Stop alarm by turning the switch on the unit OFF.
If the device does not work as described above, check that:
• There is a beep after switching it on. If not, check the batteries.
• After taking the baby out of the bed the green indicator stops flashing (within a
minute or so) – if not, the device is detecting some intrusive vibrations – see
following warning.
Important warning:
• The Nanny is a very sensitive instrument, capable of sensing a sleeping baby’s
breathing. Intrusive vibrations of the bed, the floor or the entire building can influence
its performance. The bed should not be in physical contact with another bed (which
is used by another person or animal) or with any device that generates vibrations.
Intrusive vibrations can also be caused by a powerful air movement (fan, air-
conditioning…), by walking close the bed and by other sources. If you move the bed
to a new location, you should test the Nanny before you use it.
Especificaciones del producto
Marca: | Jablotron |
Categoría: | monitor de bebé |
Modelo: | BM-01 Nanny |
Color del producto: | Zwart |
Peso del embalaje: | 98800 g |
Ancho del embalaje: | 2211 mm |
Empaquetadura en profundidad: | 280 mm |
Altura del embalaje: | 1370 mm |
Herramientas de montaje: | Ja |
Control remoto: | IR |
Diagonal de la pantalla: | 85.6 " |
Resolución: | 3840 x 2160 Pixels |
Pantalla táctil: | Ja |
Relación de aspecto original: | 16:9 |
Número de núcleos de procesador: | 4 |
Capacidad de almacenamiento interno: | 16 GB |
Incluye sistema operativo: | Android 8.0 |
Puerto USB: | Ja |
Soporte de colocación: | Binnen |
red LAN: | Ja |
Método de montaje: | Muur |
Ángulo de visión, horizontal: | 178 ° |
Ángulo de visión, vertical: | 178 ° |
Cables suministrados: | AC, HDMI, USB |
Relación de contraste típica: | 1200:1 |
Brillo: | 350 cd/m² |
luz de fondo LED: | Ja |
Rango de frecuencia horizontal: | 30 - 80 kHz |
Rango de frecuencia vertical: | 50 - 76 Hz |
Número de puertos HDMI: | 4 |
Puerto DVI: | Nee |
Número de puertos Ethernet LAN (RJ-45): | 1 |
Altavoces incorporados: | Ja |
Energía promedio: | 32 W |
Número de altavoces incorporados: | 2 |
Consumo de energía (en espera): | 0.5 W |
Número de conexiones USB: | 6 |
Certificación: | CE, LVD, FCC, WEEE, REACH |
Pantalla, número de colores.: | 1.073 biljoen kleuren |
Consumo de energía (cuando está apagado): | 0.3 W |
versión USB: | 2.0/3.2 Gen 1 (3.1 Gen 1) |
tipo HD: | 4K Ultra HD |
Memoria interna: | 3 GB |
Arquitectura del procesador: | ARM Cortex-A53+Cortex-A73 |
Versión HDMI: | 2.0 |
Tecnología de visualización: | IPS |
Tiempo de respuesta: | 5 ms |
Tamaño de píxel: | 0.494 x 0.494 mm |
Montaje VESA: | Ja |
Interfaz de montaje en panel: | 800 x 600 mm |
Destinado a: | Commercieel |
Número de puertos de entrada HDMI: | 3 |
Certificados de sostenibilidad: | RoHS |
Sistema informático: | Ja |
espacio de color rgb: | NTSC |
Puertos de entrada VGA (D-Sub): | 1 |
Tipo de sistema informático: | System-on-Chip (SoC) |
Diámetro de la pantalla en centímetros.: | 218 cm |
Clase de eficiencia energética (SDR): | B |
Consumo de energía (DEG) por 1000 horas: | 429 kWu |
Clase de eficiencia energética (HDR): | B |
Tipo de procesador: | Ja |
Soporta Windows: | Windows 2000, Windows 10, Windows 8, Windows 7, Windows XP, Windows Vista, Windows 11 |
RS-232: | Ja |
Temperatura de almacenamiento: | -20 - 60 °C |
Tipo de panel: | IPS |
Soporta el sistema operativo Mac: | Ja |
Humedad de almacenamiento: | 10 - 90 procent |
Sistema de suspensión para la pared.: | Ja |
Cantidad de puntos de contacto simultáneos: | 20 |
Tecnología de pantalla táctil: | Infrarood |
Ancho-de-pantalla: | 1957.2 mm |
Profundidad de visualización: | 86 mm |
Altura de la pantalla: | 1160 mm |
Mostrar peso: | 66000 g |
Superficie de dureza: | 8H |
Número de puertos de salida HDMI: | 1 |
Multitáctil: | Ja |
Mando a distancia incluido: | Ja |
Diseño de producto: | Interactief flatscreen |
Wifi.: | Ja |
voltaje-de-entrada-de-CA: | 100 - 240 V |
Frecuencia-de-entrada-de-CA: | 50 - 60 Hz |
Consumo de energía (típico): | 294 W |
Temperatura de funcionamiento (TT): | 0 - 40 °C |
Humedad relativa de funcionamiento (VV): | 10 - 90 procent |
Baterias-incluidas: | Ja |
Escala de eficiencia energética: | A+++ tot D |
Código del Sistema Armonizado (SA): | 85285210 |
Nivel de agua: | 28 procent |
¿Necesitas ayuda?
Si necesitas ayuda con Jablotron BM-01 Nanny haz una pregunta a continuación y otros usuarios te responderán
monitor de bebé Jablotron Manuales

30 Agosto 2024

15 Agosto 2024
monitor de bebé Manuales
- monitor de bebé Philips
- monitor de bebé Motorola
- monitor de bebé Topcom
- monitor de bebé VTech
- monitor de bebé Tefal
- monitor de bebé Alcatel
- monitor de bebé Albrecht
- monitor de bebé Alecto
- monitor de bebé Angelcare
- monitor de bebé Ansmann
- monitor de bebé Amplicomms
- monitor de bebé Nedis
- monitor de bebé SereneLife
- monitor de bebé Beurer
- monitor de bebé Hyundai
- monitor de bebé Kodak
- monitor de bebé Chicco
- monitor de bebé Jane
- monitor de bebé Concept
- monitor de bebé Manhattan
- monitor de bebé Medisana
- monitor de bebé Ezviz
- monitor de bebé Elro
- monitor de bebé EMOS
- monitor de bebé Denver
- monitor de bebé Hama
- monitor de bebé Terraillon
- monitor de bebé Babymoov
- monitor de bebé Binatone
- monitor de bebé Eufy
- monitor de bebé Summer
- monitor de bebé Tigex
- monitor de bebé Fisher Price
- monitor de bebé Lindam
- monitor de bebé Olympia
- monitor de bebé Audioline
- monitor de bebé Uniden
- monitor de bebé BT
- monitor de bebé Goclever
- monitor de bebé Graco
- monitor de bebé BabyOno
- monitor de bebé Oricom
- monitor de bebé Safety 1st
- monitor de bebé Switel
- monitor de bebé Duux
- monitor de bebé Nova
- monitor de bebé Esscom
- monitor de bebé Luvion
- monitor de bebé Konig
- monitor de bebé Reer
- monitor de bebé Tesla
- monitor de bebé Foscam
- monitor de bebé Technaxx
- monitor de bebé D-Link
- monitor de bebé Withings
- monitor de bebé Lionelo
- monitor de bebé Lorex
- monitor de bebé Basetech
- monitor de bebé Lupilu
- monitor de bebé Geemarc
- monitor de bebé Chipolino
- monitor de bebé Beaba
- monitor de bebé Stabo
- monitor de bebé Bebetel
- monitor de bebé Truelife
- monitor de bebé Hartig And Helling
- monitor de bebé NUK
- monitor de bebé Tomy
- monitor de bebé Babysense
- monitor de bebé Oregon Scientific
- monitor de bebé Modern-Electronics
- monitor de bebé Duronic
- monitor de bebé Hartig Helling
- monitor de bebé Levana
- monitor de bebé Summer Infant
- monitor de bebé IBaby
- monitor de bebé Kogan
- monitor de bebé Fischer Price
- monitor de bebé Mobi
- monitor de bebé Neonate
- monitor de bebé Pabobo
- monitor de bebé MicroTalk
- monitor de bebé Oretti
- monitor de bebé Neno
- monitor de bebé LeamsiQ
- monitor de bebé Philips-Avent
- monitor de bebé Heimvision
- monitor de bebé BabySafe
- monitor de bebé Chillax Baby
- monitor de bebé Hubble Connected
- monitor de bebé Peekyboo
Últimos monitor de bebé Manuales

27 Octubre 2024

23 Octubre 2024

22 Octubre 2024

21 Octubre 2024

21 Octubre 2024

21 Octubre 2024

20 Octubre 2024

20 Octubre 2024

18 Octubre 2024

7 Octubre 2024