Jabra PanaCast 2 Manual de Usario

Jabra Sistema de videoconferencia PanaCast 2

Lee a continuación 📖 el manual en español para Jabra PanaCast 2 (12 páginas) en la categoría Sistema de videoconferencia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

trademarks, and/or registered servicemarks owned by Altia Systems Inc. All other trademarks, servicemarks, registered trademarks, and registered servicemarks are the property

of their respective owners.

The PanaCast® 2 Camera Installation Guide is for system administrators and network engineers to

learn how to properly setup and install the PanaCast 2 Camera.

The PanaCast® 2 Video Camera is a Plug-and-Play device that uses USB ports on a Mac or PC to

deliver a high-quality, 180o field- -view, HD quality, panoramic video stream, along with a HD stereo of

microphone Producing a natural looking video stream by combining video streams from three

imagers the PanaCast® 2 simultaneously achieves an extended field of view without sacrificing

resolution. This UVC compliant device requires no additional drivers or software to operate

properly.

Installation Guide

PanaCast® 2 Camera

Industry-First Panoramic-4k USB Plug-and-Play Video Camera

Lens and imagers

Microphones

Indicator LEDs

USB 3.0

Security lock

Threaded mount

+/-5° pivot

USB power

trademarks, and/or registered servicemarks owned by Altia Systems Inc. All other trademarks, servicemarks, registered trademarks, and registered servicemarks are the property

of their respective owners.!!

Table of Contents

1)!Preparing!for!Installation:!....................................................................................................................!3!

a)! !Package Contents .........................................................................................................................!3!

b) Tools Needed for Installation! ! !3!......................................................................................................

c) Safety Recommendations! !..............................................................................................................!3!

2)! Installing!the!PanaCast!2!Camera!....................................................................................................!4!

a)! !LED Status ....................................................................................................................................!4!

b) Camera Setup! !...............................................................................................................................!4!

c) Camera Placement! !........................................................................................................................!5!

I. General Recommendations! !........................................................................................................!5!

VI. Wall Mount Placement Recommendations:! !............................................................................!7!

VII. Table Stand Placement Recommendations:! !............................................................................!9!

d)! ! !Powering up the Camera ........................................................................................................... 12!

trademarks, and/or registered servicemarks owned by Altia Systems Inc. All other trademarks, servicemarks, registered trademarks, and registered servicemarks are the property

of their respective owners.!!

1) Preparing for Installation:

a) Package Contents

PanaCast® 2

Camera

USB 3.0 Cable

(3ft)

Power Adapter

Cable (5ft)

Power

Adapter

Wall Mount

(optional)

Camera Stand

(optional)

b) Tools Needed for Installation

• A Philips screwdriver and inch size screws are required to attach the wall mount to ¼

the wall.

• To periodically tighten the base of the camera stand, you will require the same

screwdriver.

c) Safety Recommendations

• Heat: Be sure to keep the camera out of direct sunlight and environments with a

temperature greater than 90º as this will heat up the exterior of the camera, making it

too hot to hold and causing malfunctions. .Do not place the camera near the vents of a

monitor or TV screen as this will overheat the camera and cause malfunction.

• Electricity: The camera works best when used with a 120 V outlet. If this is not possible,

attain an adapter that can convert the voltage of the outlet available to 120 V. If this

requirement is not met, the camera may be under or over powered. If underpowered,

the camera will not function to full capacity or at all. If the camera is overpowered, it will

fry the circuits and cause the camera to malfunction and break.

• Water: Keep the camera, wires, and outlet it is plugged into away from all damp sources

as over exposure to dampness could cause the camera to short circuit and produce

sparks.

Especificaciones del producto

Marca:	Jabra
Categoría:	Sistema de videoconferencia
Modelo:	PanaCast 2
Color del producto:	Zwart, zilver
Peso.:	261 g
Ancho:	80 mm
Profundidad:	220 mm
Altura:	25 mm
Peso del embalaje:	1300 g
Ancho del embalaje:	155 mm
Empaquetadura en profundidad:	270 mm
Altura del embalaje:	90 mm
Manual de usuario:	Ja
Material de la carcasa:	Kunststof
Actual:	2 A
Interruptor encendido / apagado:	Ja
Tipo de enchufe de conexión:	3,5 mm
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Tipo de fuente de energía:	DC
Cables suministrados:	USB Type-C
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	MMC, MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
Certificación:	CE, FCC, REACH
Resolución (digital máxima):	3840 x 2160 Pixels
Certificados de sostenibilidad:	RoHS
Número de DisplayPorts:	1
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Estándar de red:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Tipo de comida:	Extern
Temperatura de almacenamiento:	-20 - 60 °C
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Puerto combinado para auriculares/micrófono:	Ja
Soporta el sistema operativo Mac:	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 13.0 Ventura
Compatibilidad con Mac:	Ja
Corriente de salida:	5 A
Abarcando:	20 V
Interfaz de host:	USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Otros sistemas de apoyo:	ChromeOS
MDI/MDI-X automático:	Ja
Entrega de energía USB:	Ja
Entrega de energía USB hasta máx.:	60 W
soporte 10G:	Nee
Duplex completo:	Ja
conjunto de chips:	DisplayLink - DL-5700, Genesys Logic - GL3215, VIA Labs - VL813, Texas Instruments - TPS65983
Altura del paquete principal (exterior):	302 mm
Ancho del embalaje principal (exterior):	280 mm
Longitud del paquete principal (exterior):	335 mm
Cantidad por caja principal (exterior):	6 stuk(s)
Ratio de transferencia:	5 Gbit/s
voltaje-de-entrada-de-CA:	100 - 240 V
Temperatura de funcionamiento (TT):	0 - 60 °C
Humedad relativa de funcionamiento (VV):	0 - 95 procent
Tipos de enchufes compatibles:	AU, JP, US
Soporte UASP:	Ja