Jam Trance Plus HX-P930 Manual de Usario

Jam Base/estación de acoplamiento Trance Plus HX-P930

Lee a continuación 📖 el manual en español para Jam Trance Plus HX-P930 (3 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 16 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/3
178
70
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P930
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P930)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Trance Plus needs about 3 hours for up to 10 hours of party time.
When they’re not rocking out, the LED
lights on your speaker let you know
what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH® CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between your device and
the speaker’s . Here’s how it works:Bluetooth
1. Make sure the smartphone, tablet, or computer you’re using with the speaker has .Bluetooth
2. Turn on the speaker (press and hold the power button for 3 seconds) and look for the front
screen to illuminate with a multicolored light show.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Trance Plus in your device’s list or click YES. Bluetooth
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
Thank you for purchasing
the . JAM Trance Plus
Check out the sections
below for all the
important information
about your new speaker.
Powering
On
Pairing
Mode
Connected Low
Battery
Continued on page 2.
AC adapter not included.
or
3h
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. This is the power button
2. Skip back a track
3. Turn the music down
4. Push it to play, push it again to pause
5. Turn the music up
6. Jam on to the next song
7. Control the brightness of your light show
8. Shuffle through 6 different light shows
9. Choose between 7 different light colors
10. Toggle between languages here
11. Here’s where you hook it up old-school
12. See when your speaker is charging
13. The power cord goes here
14. Language selector pin
Bluetooth®
Devices
JAM Trance Plus
on
>
3s
14
3
5
2
1
4
6
7
8
9
10
11
13
12
HELLO? SPEAKERPHONE? YES!
BLUETOOTH® CONNECTION, CONTINUED
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and will find each other every time, as long as the speaker is set Bluetooth
to and your device’s is, you know, on.Bluetooth Bluetooth
If you’re connecting to a computer, you may have some extra steps on that end.
You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the +
and - buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Trance Plus but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more, the JAM
Trance Plus will automatically shut off to preserve battery power.
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM Trance
Plus. Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through .Bluetooth
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Trance Plus.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Trance Plus for 3 seconds to ignore the call.
THE COOLEST PART: The Trance Plus knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Trance Plus
automatically does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Trance Plus.
Situation
Short Press Play/Pause Button Long Press Play/Pause Button
1st Incoming call
2nd Incoming call
On call
Pick up call
End call
Call 1 on hold, pick up call 2
Reject call
Move call from speaker to device
Reject call 2
Both calls active
Hang up call 1, switch to call 2 Switch between call 1 and call 2
PUTTING ON A SHOW!
The Trance Plus comes with 6 distinctly different light programs that allow you to throw your own light party.
LIGHT IT UP
Not only does the Trance Plus let you pick the light pattern you want to jam out to, but you can also choose the color. The Trance
Plus has 7 different colors to choose from.
All Lights Scaling Lights Scattered Lights Equalizer 1 Equalizer 2 All Programs
(cycles through all the
light programs)
2m 15m
Purple Green Red Light Blue Yellow Dark Blue Multicolored
6s
STUFF THE GOVERNMENT MAKES US SAY STUFF OUR LAWYERS MAKE US SAY
A MESSAGE FROM THE ENVIRONMENT
FCC Compliance:
Note: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX
could void the user's authority to operate this equipment.
IC Caution: RSS-GEN Issue 4 November 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Do not place speakers too close to ears. May cause
damage to eardrums, especially in young children.
• Use this product only for its intended use as described in this
manual. Do not use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to smartphones,
iPod/MP3 players, or any other device.
• Do not place or store this product where it can fall or be dropped
into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable,
or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or
cleaning solvents.
Attention California Residents:
WARNING: This product contains chemicals known to the State
of California to cause cancer, birth defects, and other
reproductive harm.
WARNING:
This product has an internal, non-replaceable lithium battery. Please
dispose in accordance with your local, state, province, and country
guidelines.
This product contains small parts that may present a choking hazard
for young children.
CAUTION: All servicing of this product must be performed by
authorized HMDX Service Personnel only.
©2015 HMDX. All Rights Reserved.
IB-HXP930 BC
COMING CLEAN
A soft, dry towel is all you need to
clean off your speaker. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
1 YEAR LIMITED WARRANTY
For detailed warranty instructions and information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: http://canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
THE VOICE FROM WITHIN
When your JAM Trance Plus isn’t rocking out, it can tell you all sorts of things it’s doing: when it’s powering on, ready to pair, paired,
at maximum volume, charging, receiving a call, ending a call, rejecting a call, and powering off.
Just like the global gadget it is, your speaker toggles between several languages or no language at all. Your speaker can parlay with
you in English, Spanish, French, or Portuguese. Making the change between language and tone is as simple as poking a paperclip,
safety pin, or the included language selector pin into the small hole on the bottom of the speaker. Click though until the speaker
starts speaking your language.
Auxiliary cable not included.

Especificaciones del producto

Marca: Jam
Categoría: Base/estación de acoplamiento
Modelo: Trance Plus HX-P930

¿Necesitas ayuda?

Si necesitas ayuda con Jam Trance Plus HX-P930 haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Jam Manuales

Jam

Jam Splash Manual de Usario

5 Octubre 2024
Jam

Jam Thrill HX-P320 Manual de Usario

4 Octubre 2024
Jam

Jam Trance Plus HX-P930 Manual de Usario

4 Agosto 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024
Denver

Denver BTL-350 Manual de Usario

5 Octubre 2024