Jenn-Air JMC2430LM Manual de Usario

Jenn-Air horno JMC2430LM

Lee a continuación 📖 el manual en español para Jenn-Air JMC2430LM (24 páginas) en la categoría horno. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

W11340511B

ELECTRIC BUILT-IN CONVECTION MICROWAVE

OVEN OWNER’S MANUAL

FOUR À MICRO-ONDES ENCASTRÉ ÉLECTRIQUE À

CONVECTION MANUEL DU PROPRIÉTAIRE

Table of Contents/Table des matières

BUILT-IN OVEN SAFETY...................................................2

Built-In Oven Safety .......................................................2

MICROWAVE OVEN MAINTENANCE AND CARE..................4

General Cleaning...........................................................4

INSTALLATION INSTRUCTIONS ........................................5

REQUIREMENTS .............................................................5

Tools and Parts .............................................................5

Location Requirements .... ........ .................... ................ ... 5

Electrical Requirements ..................................................6

INSTALLATIONS .............................................................7

Spacer Kit Installation (For Microwave Ovens) .....................7

Prepare Built-In Oven .....................................................8

Make Electrical Connection ............ ............ ..................... .8

Install Microwave Oven ............ .................... ................ ... 8

Complete Installation ......................................................9

SÉCURITÉ DU FOUR ENCASTRÉ .................................... 10

Sécurité du four encastré............................................... 10

ENTRETIEN ET RÉPARATION DU FOUR ........................... 12

Nettoyage général........................................................ 12

INSTALLATION INSTRUCTIONS ...................................... 13

EXIGENCE ................................................................... 13

Outils et pièces............................................................ 13

Exigences d’emplacement ............................................. 13

Spécifications électriques .............................................. 14

INSTALLATIONS ........................................................... 15

Installation de la trousse d’entretoise (pour four à micro-

ondes)....................................................................... 15

Préparer le four encastré ............................................... 16

Raccordement électrique............................................... 16

Installation du four à micro-ondes .................................... 17

Achever l’installation..................................................... 18

IMPORTANT:

Save for local electrical inspector's use.

IMPORTANT :

À conserver pour consultation par l'inspecteur local des installations électriques.

BUILT-IN OVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These

words mean:

DANGER You can be killed or seriously injured if you don't

immediately follow instructions.

WARNING You can be killed or seriously injured if you don’t follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the appliance, follow basic precautions,

including the following:

�Proper Installation - The appliance, when installed, must be

electrically grounded in accordance with local codes, or in

the absence of local codes, with the National Electrical

Code, ANSI/NFPA 70 Canadian Electrical Code,or the

CSA C22.1-02. In Canada, the appliance must be

electrically grounded in accordance with Canadian

Electrical Code. Be sure your appliance is properly installed

and grounded by a qualified technician.

�Never Use Your Appliance for Warming or Heating the

Room.

�Do Not Leave Children Alone - Children should not be left

alone or unattended in area where appliance is in use.

They should never be allowed to sit or stand on any part of

the appliance.

�Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the appliance.

�User Servicing – Do not repair or replace any part of the

appliance unless specifically recommended in the manual.

All other servicing should be referred to a qualified

technician.

�Storage in or on Appliance – Flammable materials should

not be stored in an oven or near surface units.

�This appliance is not intended for storage.

�Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

�Do not use replacement parts that have not been

recommended by the manufacturer (e.g. parts made at

home using a 3D printer).

�Use Only Dry Potholders – Moist or damp potholders on hot

surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel or

other bulky cloth.

�Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

�DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot

even though they are dark in color. Interior surfaces of an

oven become hot enough to cause burns. During and after

use, do not touch, or let clothing or other flammable

materials contact heating elements or interior surfaces of

oven until they have had sufficient time to cool. Other

surfaces of the appliance may become hot enough to cause

burns – among these surfaces are the coil and cooktop

elements, oven vent openings and surfaces near these

openings, oven doors, and windows of oven doors.

�Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

�Keep Oven Vent Ducts Unobstructed.

�Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

For self-cleaning ovens:

�Do Not Clean Door Gasket – The door gasket is essential

for a good seal. Care should be taken not to rub, damage,

or move the gasket.

�Do not use a protective coating to line the oven and do not

use commercial oven cleaner unless Certified for use in a

self-cleaning oven.

�Clean Only Parts Listed.

�Before Self-Cleaning the Oven – Remove broiler pan and

other utensils, and wipe off all excessive spillage.

For smart enabled ranges and ovens:

�Remote Operation – This appliance is configurable to allow

remote operation at any time. Do not store any flammable

materials or temperature sensitive items inside, on top or

near surface units of the appliance.

SAVE THESE INSTRUCTIONS

Internet Connectivity Guide for Connected Appliances Only

IMPORTANT: Proper installation of your appliance prior to use is your responsibility. Be sure to read and follow the installation

instructions that came with your appliance.

Connectivity requires Wi-Fi and account creation. App features and functionality are subject to change. Data rates may apply. Once

installed, launch the app. You will be guided through the steps to set up a user account and to connect your appliance.

You Will Need:

�A home wireless router supporting Wi-Fi, 2.4 Ghz with WPA2 security. If you are unsure of your router’s capabilities, refer to the router

manufacturer’s instructions.

�The router to be on and have a live internet connection.

�The 10–character SAID code for your appliance. The SAID code is either printed on a label on the appliance or found on the LCD

screen.

Federal Communications Commission (FCC) Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Industry Canada (IC) Compliance Notice

This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain

approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication.

To comply with FCC and Industry Canada RF radiation exposure limits for general population, antenna(s) used for this transmitter must

be installed such that a minimum separation distance of 20 cm is maintained between the radiator (antenna) and all persons at all times

and must not be co-located or operating in conjunction with any other antenna or transmitter.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

�Reorient or relocate the receiving antenna.

�Increase the separation between the equipment and receiver.

�Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

�Consult the dealer or an experienced radio/TV technician for

help.

Especificaciones del producto

Marca:	Jenn-Air
Categoría:	horno
Modelo:	JMC2430LM

¿Necesitas ayuda?

Si necesitas ayuda con Jenn-Air JMC2430LM haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

horno Jenn-Air Manuales

Jenn-Air JGRP636HL Manual de Usario

25 Octubre 2024

Jenn-Air JGRP430HL Manual de Usario

25 Octubre 2024

Jenn-Air JDRP536HM Manual de Usario

19 Septiembre 2024

Jenn-Air JEF3115GS Manual de Usario

18 Septiembre 2024

Jenn-Air JIC4715GS Manual de Usario

18 Septiembre 2024

Jenn-Air JGCK424PS Manual de Usario

18 Septiembre 2024

Jenn-Air JEC4430KS Manual de Usario

18 Septiembre 2024

Jenn-Air JEC3536HB Manual de Usario

18 Septiembre 2024

Jenn-Air JES1450ML Manual de Usario

18 Septiembre 2024

Jenn-Air JIE4115GS Manual de Usario

18 Septiembre 2024

horno Manuales

Últimos horno Manuales

Continental Edison CECM6065W Manual de Usario

27 Octubre 2024

Taurus HM778WHD Manual de Usario

27 Octubre 2024

Lacanche CITEAUX Manual de Usario

27 Octubre 2024

JennAir JDS1450FS Manual de Usario

27 Octubre 2024

Orima ORP-76-IN Manual de Usario

27 Octubre 2024

Breville the Handy Hot Plate BHP150 Manual de Usario

27 Octubre 2024

JennAir JGRP436HL Manual de Usario

27 Octubre 2024

Neff C17MS22G1 Manual de Usario

27 Octubre 2024

Pit Boss BK24 Manual de Usario

27 Octubre 2024

Guzzanti GZ-8206 Manual de Usario

27 Octubre 2024