JETI TD1609S Manual de Usario

JETI juguetes radiocontrolados TD1609S

Lee a continuación 📖 el manual en español para JETI TD1609S (7 páginas) en la categoría juguetes radiocontrolados. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

Manual DITEX-Manager

Manual Soware DITEX-Manager

With this guide, we show you how the soware DITEX manager should be applied in individual servo

programming. The soware can be download from www.Ditex-Servo.com. For more informaon,

please visit www.Ditex-Servo.com, Hacker-Motor.com or our YouTube video channel.

To program a Ditex servo rst install the soware. For programming the servos the USB interface

(Hacker part number 87201006) is required.

Open the soware and connect the USB interface to your computer. The LED of the interface lights

up green when the connecon is successful. Thereaer, plug the servo to the interface and the so-

ware will open automacally. The servo conrms this with a tone sequence.

If you click the "queson mark" in the top left to open the main menu

of the soware, there are some basic sengs of the soware that can

be changed .

Here you can change the language.

In the Sound menu, the sound of the software can be changed or turned o

The design of the soware can be chosen to your own preferences

Here you can load the update to the currently connected servo.

When pressing this buon, the Manager is restored to the original state.

General informaon

Any changes that need to be performed on the servo-soware have to be conrmed by

Otherwise the sengs will be not saved in the servo!

Manual DITEX-Manager

SETUP

Adjusng the servo center posion .

Maximum travel A

Maximum travel B

max. Limit travel A

max. Limit travel B

Changing servo direcon

The mode "NARROW" is for specic applicaons that require a higher drive

frequency. For all other applicaons u the "NORMAL" mode. se

Adjust the servo-speed

Possibility of reducing the maximum servo-torque

The servo drives for the set me is with full torque, this allows a more sensi-

tive control to the zero posion.

Here you can choose how the servo on disconnuaon of the servo pulses

should behave by the receiver. This mode is only acve when an interrup-

on of the signal cable, or if the receiver is in acve fa -safe with no servo il

output pulses.

Servo-speed to the specied fail-safe posion.

Posion where the servo drives when signal loss. ,

Manual DITEX-Manager

Prevents a sudden start of the servos when turning on the model. The servos

drive the zero posion at set speed and force. We recommend to let the so

start acve, this conserves the servo, linkage and the model.

Here are the current posion of the servo is displayed in degrees.

This is a servo tester enables you to move the servo.

Also used to control the travel sengs that you

made.

This is a special feature for adjusng the center of a rudder. If you have

connected the servo to the linkage and the rudder, press the icon "DISEN-

GAGE". Now you can bring the rudder by hand in zero posion. Then press

the icon "ENGAGE" and the servo saves the current posion as the new

zero posion. Pressing the icon "SET NEUTRAL" always moves the servo to the programmed center

posion.

SECURITY

Here, the maximum internal power temperature is set at which the servo

outputs an audible warning and the power limit is enforced. This is a secu-

rity feature to the servo from overheang by example treacly / blocking a

linkage to protect. We recommend these values to change only in individual

cases or in special applicaons.

In fall below or exceed the adjusted voltages the servo will warn acous-

cally when you enable this feature in the sound monitor.

Especificaciones del producto

Marca:	JETI
Categoría:	juguetes radiocontrolados
Modelo:	TD1609S
Color del producto:	Zwart
Peso.:	1790 g
Peso del embalaje:	3280 g
Ancho del embalaje:	211 mm
Empaquetadura en profundidad:	410 mm
Altura del embalaje:	136 mm
Amable:	Kit voor vloeistofkoeling
Nivel de ruido (alta velocidad:	27.2 dB
Flujo de aire máximo:	70.7 cfm
numero de fans:	3 ventilator(en)
Color de la iluminación:	Multi
Velocidad de rotación (máx.):	2500 RPM
Velocidad de rotación (mín.):	690 RPM
Iluminación LED:	Ja
Ubicación adecuada:	Processor
Diámetro del ventilador:	120 mm
Clasificación de voltaje:	12 V
Tensión nominal de red:	0.2 A
Zócalos de procesador compatibles:	LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1700, Socket AM4, Socket AM5
Presión de aire máxima:	3.61 mmH2O
Soporte de modulación de ancho de pulso:	Ja
Ventilador de alimentos (ancho x fondo x alto):	120 x 120 x 25 mm
Conector del ventilador:	4-pin
Material del radiador:	Aluminium
Nivel de ruido de la bomba:	12 dB
voltaje de la bomba:	12 V
Consumo de energía de la bomba:	3.84 W
Ancho del radiador:	119 mm
Profundidad del radiador:	394 mm
Altura del radiador:	27.2 mm
Conector de pompa:	4-pin
Intervalo medio de falla de la bomba (MTTF):	210000 uur
Intervalo medio de falla del ventilador (MTTF):	160000 uur
Amperaje de seguridad:	0.3 Ah
pompbreedte:	81 mm
Profundidad de la bomba:	84.9 mm
pomphoogte:	53.15 mm