JL Audio MediaMaster 50 Manual de Usario

JL Audio Radio MediaMaster 50

Lee a continuación 📖 el manual en español para JL Audio MediaMaster 50 (20 páginas) en la categoría Radio. Esta guía fue útil para 17 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
Thank you for purchasing a JL Audio MediaMaster®
Source Unit for your sound system.
This product has been designed and manufactured to exacting
standards in order to deliver years of musical enjoyment. For maximum
performance, we highly recommend that you have your MM50 installed
by an authorized JL Audio dealer. Your authorized dealer has the
training, expertise and installation equipment to ensure optimum
performance from this product. Due to the complexity of modern
vehicle systems, we do not recommend self-installation unless you have
extensive experience in automotive and marine electrical systems.
Should you decide to install this product yourself, please take the time to
read this manual thoroughly to familiarize yourself with its installation
requirements and setup procedures.
If you have any questions regarding the instructions in this manual or
any aspect of the product’s operation, please contact your authorized
JL Audio dealer for assistance. If you need further assistance, please contact
the JL Audio Technical Support Department at technical@jlaudio.com
or call (954) 443–1100 during business hours.
OWNER’S MANUAL
2
Protect Your Hearing!
We value you as a long-term customer.
For that reason, we urge you to practice
restraint in the operation of this product
so as to not damage your hearing and
that of others in your vehicle. Studies
have shown that continuous exposure
to high sound pressure level can lead
to permanent (irreparable) hearing loss.
Mobile sound systems are capable of
producing such high sound pressure
levels. Please limit your continuous
exposure at high volumes. While driving,
operate your audio system in a manner
that still allows you to hear necessary
noises to operate your vehicle/vessel
safely (horns, sirens, etc.).
FCC Compliance Statement
This equipment has been tested and
found to comply with the limits of
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and,
if not installed in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving
antenna.
- Increase separation between the
equipment and the receiver.
- Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Any changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
this equipment.
3
Safety Considerations
Install this product in a dry, well-
ventilated location that does not
interfere with your factory-installed
systems. If a dry environment is not
available, a location that is not exposed
to heavy splashing may be used.
While this product is designed to be
water-resistant, it should never be
submerged under water or subjected to
high-pressure water spray.
Do not mount this product in an engine
compartment or areas of extreme heat.
Areas exposed to a heater or hot air
should also be avoided.
Securely mount this product so that it
does not come loose in the event of a
collision, sudden jolt or as a result of
repeated vibrations during normal use.
Check before drilling to make sure that
you will not be drilling into an exterior
panel/hull, fuel tank, gas/brake line,
wiring harness or other vital system.
Do not run system wiring outside or
underneath the vehicle/vessel. This is
an extremely dangerous practice, which
can result in severe damage/injury.
Protect all system wires from
sharp edges and wear by carefully
routing them, tying them down and
using grommets and loom where
appropriate. Secure all wiring using
cable ties or wire clamps, as needed.
Do not replace the power wire fuse
with one of a different value.
Never bypass the fuse.
Never make power connections with a
“live” wire. Failure to make safe, tight,
high-integrity connections can result in
fire and extensive damage.
Installation Applications
This product is designed for operation
with 12 volt, negative-ground electrical
systems. Using this product in systems
with positive ground and/or voltages
other than 12 volts may result in
damage to the product and will void the
warranty. This product is not certified or
approved for use in aircraft.
What Is Included
(1) MediaMaster® MM50 Source Unit
(1) Power Connections Wire Harness
(1) Speaker Outputs Wire Harness
(1) Mounting gasket
(1) Mounting template
(4) Mounting screws
(1) Protective Sun Cover
(1) Owner’s manual
Product Description
The MediaMaster® MM50 is a weather-
resistant source unit designed for marine
and powersports applications.

Especificaciones del producto

Marca: JL Audio
Categoría: Radio
Modelo: MediaMaster 50

¿Necesitas ayuda?

Si necesitas ayuda con JL Audio MediaMaster 50 haz una pregunta a continuación y otros usuarios te responderán




Radio JL Audio Manuales

Radio Manuales

Últimos Radio Manuales