JLab Studio Wireless Manual de Usario

JLab Auriculares Studio Wireless

Lee a continuación 📖 el manual en español para JLab Studio Wireless (2 páginas) en la categoría Auriculares. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
STUDIO WIRELESS
HEADPHONES
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
ect “JLab Studio” in your
vice settings to connect.
When the headphones
are paired, voice prompts
“You are connected” and
blue light will flash slowly.
Bluetooth
JLab Studio
Settings
2
Turn on the Bluetooth
in your device settings.
Bluetooth
Settings
1When the Studio Wireless
Headphones are powered
off, press and hold the
Power Button for
approximately
8 seconds.
Fast blinking
red and blue
light indicates
searching for
Bluetooth device.
PAIRING NEW / ADDITIONAL DEVICES:
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat process for new devices.FIRST TIME STEUP
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your
proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com
or visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates How-to tips|
FAQs & more
JLABAUDIO.COM
CHARGING
Note: For optimum performance, charge overnight with Micro
USB cable prior to using. Allow about 3 hours to fully charge.
Connect the Micro USB (included) to the headphone and connect
the USB into a computer or AC adaptor (not included). Make sure
the USB connection has a power output source.
Solid red light indicates the headphone is charging.
Solid blue light indicates charging is complete.
Note: Studio Bluetooth can still be used while charging.
Power on and connect to device after charging occurs.
BUTTON FUNCTIONS
OR
FULLY
CHARGED
CHARGING
POWER ON OFF:/
Click & hold 2+ seconds
PLAY PAUSE ANSWER / / /
HANG UP CALLS: Click once
REJECT INCOMING CALL:
Click & hold 1 second
ACTIVATE SIRI (iOS) OR
“OK GOOGLE” (ANDROID):
Click twice
BLUETOOTH PAIRING:
See FIRST TIME SETUP
VOLUME UP: Click once
TRACK FORWARD:
Click & hold 2+ seconds CHANGE EQ:
Press both buttons simultaneously
(Studio will cycle 3 EQ settings)
VOLUME DOWN: Click once
TRACK BACKWARD:
Click & hold 2+ seconds JLab SIGNATURE
(One Beep)
JLab C3™ signature sound
with amplified vocals and bass
BALANCED
(Two Beeps)
Even sound with no additional
sound enhancements
BASS BOOST
(Three Beeps)
Amplified bass and sub-bass
CAUTIONS
Avoid getting moisture or liquids on the headphone cups.
Avoid extreme heat, cold, and humidity.
Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
If you experience regular discomfort while using this product, discontinue use and consult your physician.
We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products Product alerts Burn-in your headphones| |
JLab Audio + Burn-in Tool

Especificaciones del producto

Marca: JLab
Categoría: Auriculares
Modelo: Studio Wireless

¿Necesitas ayuda?

Si necesitas ayuda con JLab Studio Wireless haz una pregunta a continuación y otros usuarios te responderán




Auriculares JLab Manuales

Auriculares Manuales

Últimos Auriculares Manuales