Joranalogue Morph 4 Manual de Usario

Joranalogue No categorizado Morph 4

Lee a continuación 📖 el manual en español para Joranalogue Morph 4 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
MORPH 4
DIMENSIONAL MODULATION ARRAY
1
INTRODUC TIO N
Modulation is the core concept of modular
synthesis: parameters changing over time,
adding movement and musical interest to what
would otherwise be merely static sounds. Being
able to control the amplitude of signals
throughout a patch is therefore essential, and
one can never have too many voltage controlled
amplifiers (VCAs).
Designed as a -fully featured modulation hub for
Eurorack synthesisers, Morph 4 takes the basic
concept of the multi module to the next -VCA
level.
Four linear amplitude modulators are controlled
by a master ‘morph’ parameter. The response of
each modulator to this parameter is completely
variable, both manually and under voltage
control, and can be overridden if desired. Each
response is triangular, with the ‘ ’ position
parameter setting the maximum point along the
morph axis, while ‘span’ determines the width of
the triangle’s base.
In addition to separate signal inputs and outputs,
a variety of combined outputs is available as well:
A+B, C+D, add and averag (unity gain) ing mixes,
and instantaneous minimum and maximum.
Input normalisation makes it easy to send the
same signal to multiple modulators, while
output and modulator response LEDs provide
essential visual feedback.
The combination of master control, fully flexible
modulators and multiple combined outputs
creates a module truly embodying the spirit of
‘patch programmable’ modular synthesis. Use
Morph 4 as a voltage controlled mixer, dual
crossfader, dual panner, interpolating scanner,
interpolating distributor, quad VCA ,
quadraphonic controller, slope modifier, rectifier,
complex waveshaper or something in between
any of those—the choice is yours.
CONTENTS
I 4 n the Morph box, you’ll find:
Product card, stating serial number and
production batch.
16- -10-to pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 4 he Morph module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
MORPH 4
DIMENSIONAL MODULATION ARRAY
2
CONTROL S & CONNECTIONS
1 LEVEL KNOBS
The level knobs are CV attenuators for the
modulator level inputs, determining the gain for
each modulator.
2 POSITION KNOBS
Each modulator by default responds to the
morph parameter in a triangular fashion. The
position parameter sets the location of the
triangle’s peak in relation to the morph axis. For
example, if a position knob is set to the centre
position, that modulator will reach its peak
response when the morph knob is centred as
well (assuming no level CV is applied).
3 SPAN KNOBS
The width of the base for each modulator’s
morph response triangle is set by the span
parameter. For example, a small span means the
modulator will be fully closed for most morph
values, except for a small range around the peak
position.
MORPH 4
DIMENSIONAL MODULATION ARRAY
3
4 SIGNAL INPUTS
Connect your input signals to these sockets.
Input A has a +5 V normal, making it easy to use
Morph 4 to generate rather than process signals.
All other inputs are normalised from the
preceding one (A into B, B into C and C into D),
as indicated on the fro so the same nt panel,
signal can be sent through multiple modulators.
Any kind of signal can be used: audio, CV or
gate/trigger.
5 LEVEL INPUTS
The level CV inputs provide linear voltage control
over the modulators. With the attenuator at
maximum, the response is 0 (−∞ dB) at 0 V, and
unity gain (0 dB) at +5 V. They can be made to
amplify when more than +5 V of CV is applied.
By default, th driven from the ese sockets are
triangular morph response generated for each s
modulator from its position and span
parameters. Plugging a socket into one of them
allows the corresponding modulator to be
controlled directly instead, overriding the morph
functionality.
6 POSITION AND SPAN INPUTS
Any voltage applied to one of these sockets is
added to the position/span set using the
corresponding modulator’s knob.
7 SIGNAL OUTPUTS AND LEDS
The modulated signals are available directly from
these output sockets.
The LEDs show the real-time output voltages,
lighting up red for positive and blue for negative.
8 LEVEL LEDS
These LEDs visualise the incoming level CV for
each channel, determined either by the morph,
position and span parameters or the signal
applied directly to the level socket, before any
attenuation by the corresponding level knob.
9 MORPH KNOB
The morph parameter is a kind of ‘macro control’,
affecting all channels simultaneously (except
channels where the level CV input is in use). How
the channels respond to different morph levels
depends entirely on their position and span
settings.
10 MORPH MODULATION INPUT AND KNOB
External modulation of the morph parameter is
possible using this input socket and polariser
knob. While the manual knob range is 0 to +5 V,
corresponding to the range of the channel
position knobs, external modulation can move
the morph value outside this range if desired.
11 S UMMING OUTPUTS
Two sub-mix outputs are available: one
combining channels A and B, and another
combining C and D. These are typically used for
(stereo) crossfading applications.
12 ADDER/AVERAGER OUTPUTS
These additional mixing outputs combine all
channels, useful for voltage controlled mixing
and scanning. They only differ in gain.
T he adder output simply adds up all channel
output voltages at unity gain, most useful when
processing - low level signals.
The averager on the other hand lowers gain by
12 dB, avoiding clipping when processing
stronger signals.
13 MINIMUM/MAXIMUM OUTPUTS
The minimum and maximum output voltage
levels of the four channels are continuously
computed by analogue circuitry and made
available from these output sockets. They can
create surprising results for a wide variety of
input signals.

Especificaciones del producto

Marca: Joranalogue
Categoría: No categorizado
Modelo: Morph 4

¿Necesitas ayuda?

Si necesitas ayuda con Joranalogue Morph 4 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Joranalogue Manuales

Joranalogue

Joranalogue Cycle 5 Manual de Usario

17 Septiembre 2024
Joranalogue

Joranalogue Route 4 Manual de Usario

28 Agosto 2024
Joranalogue

Joranalogue Morph 4 Manual de Usario

26 Agosto 2024
Joranalogue

Joranalogue Dim 2 Manual de Usario

26 Agosto 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024