Jung 521KIZNAUF Manual de Usario

Jung Toma de corriente 521KIZNAUF

Lee a continuación 📖 el manual en español para Jung 521KIZNAUF (4 páginas) en la categoría Toma de corriente. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
SCHUKO socket with surge voltage protection
SCHUKO socket with surge voltage protection
Art. No. : ..521 KINAUF..
SCHUKO socket with surge voltage protection
Art. No. : 821 UF W
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
To protect against high-energy surges, install multistage selective protection. Otherwise
connected devices may be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Socket outlet
(2) Red light emitting diode = protection function not in operation
(3) Red light emitting diode = mains voltage present
3 Function
Intended use
- Type 3 fine protection for protecting electrical and electronic devices against transient
power surges according to EN 61643-11
- For use only in combination with Type 1 coarse protection and Type 2 medium protection
- For use in TN, TT and IT systems
- Stationary installation indoors in appliance box according to DIN 49073.
Product characteristics
- The device protects electrical and electronic devices against transient power surges.
- Failure of the protection function is indicated by an acoustic and visual signal.
1/4
32515853
J0082515853 05.01.2016
Instructions for operation
- Keep cables between loads (5) and surge protection socket outlet (1) as short as possible,
max. 4 m.
- Do not lay protected cables parallel to unprotected cables. There is a danger of surge
voltage coupling.
- When performing insulation measurements on the system, all surge protection products
should always be disconnected, because otherwise the test voltage will be limited by the
protective modules, thus leading to incorrect measurements.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Connecting and fitting the device
Figure 2: Connection diagram for single socket outlet
2/4
32515853
J0082515853 05.01.2016
SCHUKO socket with surge voltage protection
Figure 3: Connection diagram for socket outlet combination
(1) Surge protection socket outlet
(4) Socket outlet with normal design
(5) Load
oConnect surge protection socket outlet according to connection diagram for single socket
outlet (figure 2) or connection diagram for socket outlet combination (figure 3).
iThe maximum continuous voltage (see Technical data) must not be exceeded. In multiple
combinations, when a surge protection socket outlet is used the other socket outlets used
in the combination are also protected in the normal design. For this the socket outlets have
to be installed on the same conductor.
oInstall overvoltage protection socket outlet in appliance box.
oMount the cover and frame. Observe correct installation position. Otherwise the LED will
not function.
5 Appendix
5.1 Technical data
Surge protection Type 3 arrester (one port)
Rated voltage AC 230V ~ (±10%)
Mains frequency 50 / 60Hz
Maximum continuous voltage AC 255V~ (UC)
No-load voltage 4kV (UOC)
Rated load current 16A (IL)
Short circuit strength 1.5kA (ISCCR)
Protection level
L/N ≤ 1.25kV (FM)
L/PE;N/PE ≤ 1.25 kV (FM)
TOV characteristic 442 V/5 s/120 min (UT)
Circuit breaker max. 16A (gG/C)
Ambient temperature -5 ... +40°C
Relative humidity 5 ... 95% (No moisture condensation)
Connection
single stranded 1.5 ... 2.5mm²
This device can protect connected loads only up to the protection level specified in the technical
data. Surge voltages that are higher than that may still damage the connected devices. The
same applies for devices that require a lower protection level. For this reason we accept no
liability for any damage to the connected loads.
3/4
32515853
J0082515853 05.01.2016
SCHUKO socket with surge voltage protection

Especificaciones del producto

Marca: Jung
Categoría: Toma de corriente
Modelo: 521KIZNAUF

¿Necesitas ayuda?

Si necesitas ayuda con Jung 521KIZNAUF haz una pregunta a continuación y otros usuarios te responderán


Toma de corriente Jung Manuales

Jung

Jung 521KIZNAUF Manual de Usario

17 Septiembre 2024

Toma de corriente Manuales

Últimos Toma de corriente Manuales

V-Tac

V-Tac VT-5001 Manual de Usario

25 Octubre 2024
Busch-Jaeger

Busch-Jaeger 6126/01-82 Manual de Usario

15 Octubre 2024
ORNO

ORNO OR-GM-9041 Manual de Usario

15 Octubre 2024
ORNO

ORNO OR-GB-460 Manual de Usario

15 Octubre 2024
ORNO

ORNO OR-GB-463 Manual de Usario

15 Octubre 2024
ORNO

ORNO OR-GB-461 Manual de Usario

15 Octubre 2024
ORNO

ORNO OR-GB-462 Manual de Usario

15 Octubre 2024
Busch-Jaeger

Busch-Jaeger 6127/02-81 Manual de Usario

6 Octubre 2024
Gigabyte

Gigabyte X870 Aorus Elite WIFI7 ICE Manual de Usario

1 Octubre 2024
Kogan

Kogan KASPUSBAC2A Manual de Usario

1 Octubre 2024