Jung CD1790DWW Manual de Usario
Jung
detector de movimiento
CD1790DWW
Lee a continuación 📖 el manual en español para Jung CD1790DWW (13 páginas) en la categoría detector de movimiento. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/13
LB management
LB management
LB management
LB managementLB management
Motion and presence detector
Motion and presence detector
Motion and presence detector
Motion and presence detector
Motion and presence detectorMotion and presence detector
Art. no.: DWPM17360WW
Motion and presence detector
Motion and presence detector
Motion and presence detector
Motion and presence detectorMotion and presence detector
Art. no.: DWPM17360AL
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
pending on the insert used, the load is not electrically isolated from the mains, even when the
pending on the insert used, the load is not electrically isolated from the mains, even when the
pending on the insert used, the load is not electrically isolated from the mains, even when the
pending on the insert used, the load is not electrically isolated from the mains, even when thepending on the insert used, the load is not electrically isolated from the mains, even when the
device is switched off.
device is switched off.
device is switched off.
device is switched off.device is switched off.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure1: Device components
(1) FMinsert
(2) Sensor top
(3) Brightness sensor
(4) Button Bluetooth
Bluetooth
Bluetooth
BluetoothBluetooth Ʃ
(5) Sensor window and status LEDs
(6) Decor ring
1 / 13
82599323 25.10.2019
J0082599323
LB management
LB management
LB management
LB managementLB management
Motion and presence detector
(7) Push-on cover
Status LED
Status LED
Status LED
Status LEDStatus LED
Red LED lights up Self-test
Red LED flashes 3 s on / 3 s off Alarm function active
Red LED flashes 0.5 s on / 0.5 s off Alarm was triggered
Red LED flashes three times followed by a 1 s
pause
Cover was previously connected to another in-
sert
Yellow LED lights up "Off" or "Off for 0.5 - 5 hours" function active
Yellow LED flashes Presence simulation active
Green LED lights up "On" or "On for 0.5 - 5 hours" function active
Blue LED lights up Device is coupled with a mobile end device
and active app
Blue LED flashes 0.5 s on / 0.5 s off Bluetooth coupling mode active
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
– Automatic switching of lighting depending on the heat motion and ambient brightness
– Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB
management
– Ceiling installation on flush-mounted insert.
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
Functions directly on the cover
– Extension of the detection area in combination with 3-wire extension
– Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button
– Dimming light via extension with dimming insert
– Resetting to factory setting
– Push-on cover for limiting the detection field
Functions via app
– Setting the device as presence detector or motion detector
– Setting the switch-on threshold
– Separate adjustment of the sensitivity of the three PIR sensors
– Setting the run-on time
– On or off
– On or off for 0.5 - 5 hours
– Switch-off warning
– Dynamic run-on time
– Presence simulation
– Alarm function
– Timer function
– Walking test
In combination with a switch insert
– Pulse operation
In combination with a dimming insert
– Switch on with last saved brightness or saved switch-on brightness
– Adjusting the minimum brightness
– Adjusting the maximum brightness
– Hotel function
2 / 13
82599323 25.10.2019
J0082599323
LB management
LB management
LB management
LB managementLB management
Motion and presence detector
– Night light function
– Constant light regulation
Automatic operation
Automatic operation
Automatic operation
Automatic operationAutomatic operation
The device detects heat motions of people, animals and objects.
– The light is switched on if a person enters the detection field and the brightness threshold
is below the set brightness threshold.
– The run-on time restarts with each detected motion.
– The light is switched off, if:
no more movement is detected in the detection field and the run-on time has elapsed or
the ambient light is too bright and the run-on time has elapsed.
To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a
brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions
to keep the time as short as possible.
Behaviour after a mains voltage failure
Behaviour after a mains voltage failure
Behaviour after a mains voltage failure
Behaviour after a mains voltage failureBehaviour after a mains voltage failure
After mains voltage return, the device performs a self-test for a maximum of 20 seconds. After
the self-test has been completed, the device is ready for operation.
If the red status LED flashes three times at repeated intervals, the cover was previously
connected to another insert. To enable the function again, either place the cover onto the
respective insert or press the Bluetooth button (4) for longer than 4 seconds.
The following applies during the self-test:
– The red status LED is illuminated.
– The load is switched off.
– Movements are not detected
– The device can be operated via extensions
4
4
4
44 Commissioning
Commissioning
Commissioning
CommissioningCommissioning
Install app on a mobile end device
Install app on a mobile end device
Install app on a mobile end device
Install app on a mobile end deviceInstall app on a mobile end device
Requirement for operation via app is a mobile end device with Bluetooth interface, running the
Android operating system or iOS.
￭ Download and install the Clever Config app from the iTunes App Store (iOS) or Google
Play Store (Android).
Couple mobile end devices via Bluetooth
Couple mobile end devices via Bluetooth
Couple mobile end devices via Bluetooth
Couple mobile end devices via BluetoothCouple mobile end devices via Bluetooth
Precondition: insert and cover must be ready for operation. The mobile end device is located
close to the cover.
￭ Activate coupling mode: Press the Bluetooth
Bluetooth
Bluetooth
BluetoothBluetooth button (4) (Figure 1) for more than 4Ʃ
seconds.
The blue LED flashes. The coupling mode is active for one minute.
￭ Start the Bluetooth app and search for device to be coupled.
Cover is coupled with the end device and shown in the app.
The coupling mode is automatically exited after successful coupling. The blue LED lights
up to confirm an active connection.
A maximum of 8 mobile end devices can be coupled with a cover. When coupling the 9th
device, the oldest device will be deleted.
5
5
5
55 Operation
Operation
Operation
OperationOperation
The app is used for the configuration and operation of the device. Some basic functions can
also be operated via connected extensions.
3 / 13
82599323 25.10.2019
J0082599323
Especificaciones del producto
| Marca: | Jung |
| Categoría: | detector de movimiento |
| Modelo: | CD1790DWW |
¿Necesitas ayuda?
Si necesitas ayuda con Jung CD1790DWW haz una pregunta a continuación y otros usuarios te responderán
detector de movimiento Jung Manuales
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
detector de movimiento Manuales
- detector de movimiento Gigaset
- detector de movimiento Honeywell
- detector de movimiento Alecto
- detector de movimiento Hikvision
- detector de movimiento Nedis
- detector de movimiento Yale
- detector de movimiento Eminent
- detector de movimiento Renkforce
- detector de movimiento Optex
- detector de movimiento Schneider
- detector de movimiento Axis
- detector de movimiento Theben
- detector de movimiento Chamberlain
- detector de movimiento Velleman
- detector de movimiento Techly
- detector de movimiento Smartwares
- detector de movimiento Steren
- detector de movimiento Perel
- detector de movimiento Steinel
- detector de movimiento ESYLUX
- detector de movimiento Dahua Technology
- detector de movimiento Cotech
- detector de movimiento Arlo
- detector de movimiento Grothe
- detector de movimiento Merten
- detector de movimiento Hager
- detector de movimiento Massive
- detector de movimiento Busch-Jaeger
- detector de movimiento DESQ
- detector de movimiento Xavax
- detector de movimiento Marmitek
- detector de movimiento Niko
- detector de movimiento DSC
- detector de movimiento HQ
- detector de movimiento Fibaro
- detector de movimiento Iget
- detector de movimiento Nexa
- detector de movimiento Satel
- detector de movimiento Wentronic
- detector de movimiento EQ3
- detector de movimiento Homematic IP
- detector de movimiento Vernier
- detector de movimiento Crestron
- detector de movimiento Chuango
- detector de movimiento ORNO
- detector de movimiento Berker
- detector de movimiento Extron
- detector de movimiento Maxsa
- detector de movimiento Kopp
- detector de movimiento Vimar
- detector de movimiento Kogan
- detector de movimiento XQ-Lite
- detector de movimiento Legrand
- detector de movimiento Elgato
- detector de movimiento Intertechno
- detector de movimiento Schwaiger
- detector de movimiento Inovonics
- detector de movimiento V-Tac
- detector de movimiento Suevia
- detector de movimiento EtiamPro
- detector de movimiento Pentatech
- detector de movimiento Joy-it
- detector de movimiento RAB
- detector de movimiento BEA
- detector de movimiento Tellur
- detector de movimiento Megatron
- detector de movimiento Ledvance
- detector de movimiento Gewiss
- detector de movimiento ALC
- detector de movimiento Avigilon
- detector de movimiento GEV
- detector de movimiento Pepperl+Fuchs
Últimos detector de movimiento Manuales
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024