Maxsa 43218 Manual de Usario
Maxsa
detector de movimiento
43218
Lee a continuación 📖 el manual en español para Maxsa 43218 (6 páginas) en la categoría detector de movimiento. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/6
Model #: 43218
ASSEMBLY & OPERATING INSTRUCTIONS
ABOUT YOUR DUAL HEAD LED SECURITY SPOTLIGHT
The Dual Head LED Security Spotlight is perfect for porches, doorways, or around the exterior of your home
or business. The 8 super bright LEDs in the Dual Head LED Security Spotlight have an estimated life of
30,000 hours so they should never need changing.
This Dual Head LED Security Spotlight has an adjustable TIME dial that allows light duration of up to 30
seconds. New batteries should last roughly a year with normal usage.
The Dual Head LED Security Spotlight has a built-in motion sensor, which automatically turns on the light
when movement of a heat source (such as people, animals, or cars) is detected in the area. The light
remains on while motion continues to be detected in the area.
The Dual Head LED Security Spotlight has a LUX setting which can be adjusted to control the functioning of
the built-in photosensor so that the light only turns on at night.
The Dual Head LED Security Spotlight requires 3 C cell batteries (not included). The batteries typically
last up to 1 year under normal use. The shorter the time period used, the longer the batteries will last. The
spotlight may function irregularly or not at all at temperatures near or below freezing (2 ˚ F/ ˚ ) due to the 0-6 C
functionality of alkaline batteries. Normal operation will return when the temperature rises.
2
INCLUDED PARTS:
Carefully remove and identify all the parts from their protective packaging and lay them out in front of you.
Adjustment dials are located on the backside of the motion sensor as shown in the pictures below. Rotate
the motion sensor so you have access to the backside of it. This is the side that is opposite of the front,
denoted by an arrow and the word FRONT on the motion sensor.
INSTALLING / REPLACING THE BATTERIES:
When the batteries run out of power, you can replace the batteries with 3 new C-Cell batteries. Follow the
steps below when replacing the battery.
1. Switch the Dual Head LED Security Spotlight to OFF.
2. Remove the Dual Head LED Security Spotlight from its mounted back.
3. Remove the thumbscrew from the bottom of the back of the Dual Head LED Security Spotlight.
a. Gently press on the button on the top of the back of the Dual Head LED Security Spotlight and
pull the light away from the mounting bracket.
b. If replacing old batteries, carefully remove the old batteries from the battery tray by hand and
replace with three (3) new C-Cell batteries. If installing batteries for the rst time, just insert
three (3) new C-Cell batteries into the battery tray. Ensure that the new batteries are inserted in
the correct +/- polarity orientation as indicated in the battery compartment.
WARNING: BATTERIES INSTALLED INCORRECTLY COULD POTENTIALLY DAMAGE THE UNIT.
4. Press the Dual Head LED Security Spotlight back into the mounted back until the top button clicks
into place. You will have to press the button down rst to get the mount to slide in.
5. Replace the thumb screw in the bottom of the back of the Dual Head LED Security Spotlight.
6. Switch the Dual Head LED Security Spotlight back to AUTO
NOTE: DO NOT DISPOSE OF BATTERIES IN GENERAL HOUSEHOLD TRASH OR INTO A
FIRE SINCE THE BATTERIES MAY EXPLODE. CONSULT YOUR LOCAL REGULATIONS FOR
CORRECT DISPOSAL OF BATTERIES. DO NOT TAKE APART THE BATTERIES SINCE THEY
CONTAIN CORROSIVE CHEMICALS.
3
CHOOSING A LOCATION FOR YOUR DUAL HEAD LED SECURITY SPOTLIGHT:
This Dual Head LED Security Spotlight provides safety and security around your home. It is ideal for lighting
up areas where electricity is not available such as porches, driveways, carports outside, garages and
entrance areas.
When deciding where to mount the light, keep in mind that the motion sensor has a horizontal eld of vision
of 130º at a distance of up to 26 feet when the surrounding temperature is 75°F. The outside temperature
will impact the detection distance. As temperatures get colder the motion sensor will become more sensitive
and the range of the motion sensor will increase.
HOW TO INSTALL YOUR DUAL HEAD LED SECURITY SPOTLIGHT:
TOOLS REQUIRED FOR INSTALL:
You only need a Phillips head screwdriver, however if you want to mount into harder surfaces like cement,
concrete, or brick, you will want to pre-drill holes.
Use the included mounting bracket and (2) screws to mount the Dual Head LED Security Spotlight securely
to a wall.
TO INSTALL THE MOUNTING BRACKET:
1. Remove the mounting bracket from the back of the light by unscrewing the
(one) thumb screw and pushing the button at the top of base of the light.
Be careful not to damage the mounting bracket as it also serves as the back of the light and the
battery cover.
2. Align the mounting bracket on the wall and mark the locations of the two holes to be drilled with a
pencil. Remove the mounting bracket from the wall.
3. Drill pilot holes for screws if needed. Screw anchors should be used for cement, brick, or similar
surfaces.
4. Align the mounting bracket on the wall and install the two screws using a screwdriver.
5. Press the Dual Head LED Security Spotlight back into the mounted back until the top button clicks
into place. You will have to press the button down rst to get the mount to slide into place.
6. Replace the thumb screw in the base of the back.
Especificaciones del producto
| Marca: | Maxsa |
| Categoría: | detector de movimiento |
| Modelo: | 43218 |
¿Necesitas ayuda?
Si necesitas ayuda con Maxsa 43218 haz una pregunta a continuación y otros usuarios te responderán
detector de movimiento Maxsa Manuales
19 Septiembre 2024
19 Septiembre 2024
detector de movimiento Manuales
- detector de movimiento Gigaset
- detector de movimiento Nedis
- detector de movimiento Yale
- detector de movimiento Renkforce
- detector de movimiento Optex
- detector de movimiento Schneider
- detector de movimiento Axis
- detector de movimiento Theben
- detector de movimiento Chamberlain
- detector de movimiento Velleman
- detector de movimiento Smartwares
- detector de movimiento Perel
- detector de movimiento Steinel
- detector de movimiento ESYLUX
- detector de movimiento Dahua Technology
- detector de movimiento Arlo
- detector de movimiento Grothe
- detector de movimiento Hager
- detector de movimiento Busch-Jaeger
- detector de movimiento DESQ
- detector de movimiento Xavax
- detector de movimiento Marmitek
- detector de movimiento Niko
- detector de movimiento Jung
- detector de movimiento DSC
- detector de movimiento HQ
- detector de movimiento Fibaro
- detector de movimiento Satel
- detector de movimiento Wentronic
- detector de movimiento EQ3
- detector de movimiento Homematic IP
- detector de movimiento Vernier
- detector de movimiento Chuango
- detector de movimiento ORNO
- detector de movimiento Berker
- detector de movimiento Extron
- detector de movimiento Kopp
- detector de movimiento Vimar
- detector de movimiento Kogan
- detector de movimiento XQ-Lite
- detector de movimiento Legrand
- detector de movimiento Elgato
- detector de movimiento Intertechno
- detector de movimiento Schwaiger
- detector de movimiento Inovonics
- detector de movimiento V-Tac
- detector de movimiento Suevia
- detector de movimiento Pentatech
- detector de movimiento Joy-it
- detector de movimiento Megatron
- detector de movimiento Ledvance
- detector de movimiento Gewiss
- detector de movimiento ALC
- detector de movimiento Avigilon
- detector de movimiento GEV
- detector de movimiento Pepperl+Fuchs
Últimos detector de movimiento Manuales
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024