Jung IPR 200 REG Manual de Usario
Lee a continuación 📖 el manual en español para Jung IPR 200 REG (16 páginas) en la categoría Router. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/16
Product Documentation
IP Router
Art. No.: IPR 200 REG
ALBRECHT JUNG GMBH & CO. KG
Volmestrasse 1
D-58579 Schalksmühle
GERMANY
Telephone: +49 2355 8060
Fax: +49 2355 806204
e-mail: kundencenter@jung.de
Internet: www.jung.de
2
1. Safety instructions
Electrical equipment must only be installed and mounted by qualified
electricians.
When connecting KNX interfaces, detailed knowledge through KNX training is
required.
• The manufacturer shall not be liable for any costs or damage incurred by the
user or third party through the use this device, misuse or disturbances of the
device or user equipment.
• Any unauthorized changes and modifications to the equipment will render the
warranty null and void!
• The manufacturer shall not be liable for damage arising from improper use.
2. Installation and connection
Operation of the KNXnet/IP router requires:
• One of the following power supplies with at least 1 Watt power output:
Safety extra-low voltage of 20 to 30 VDC (direct voltage)
Safety extra-low voltage of 16 to 24 VAC (alternating voltage)
"Power over Ethernet" (IEEE 802.3af), Class 1
• A 10/100 Mbit compatible Ethernet connection
• A KNX/EIB bus connection
3. Commissioning
3.1 Description of functions
The interface has the following functionalities:
LED display for communication, Ethernet communication and programming
mode
• Configuration via ETS
• Max. 5 connections to IP terminal devices, e.g. for simultaneous visualisation
and configuration
• Supply from network line Power-over-Ethernet to IEEE 802.3af , through – –
separate voltage supply or the auxiliary voltage output of the KNX voltage
supply.
• Electrical isolation between KNX and IP network
3.2 Configuration
In the ETS project, an appropriate device must be created and configured.
• Activate programming mode: Press programming button.
• The programming LED lights up.
• Program a physical address with the aid of the ETS.
• The programming LED goes out .
• Label the device with the physical address.
• Load application data into the device with the aid of the ETS.
3
3.3 Physical address of the data interface
A direct connection to the KNX can be established from a PC or other data
processing equipment (e.g. visualisation units) in the network via an IP data network
and the KNX IP interfaces. This allows access to the bus from any point in the IP
data network.
The ETS3 (from version 3.0c) enables the configuration of KNX installations via the
existing IP data network and uses the IP interface such as a conventional serial
RS232 or USB data interfaces for communication with the bus. This also includes the
downloading of bus devices or the group bus monitor function (no support of the bus
monitor mode).
For communication via KNXnet/IP Tunnelling and / or ObjectServer, the device must
use a virtual physical address for each connection. These additional physical
addresses must not be identical with the physical address of the device and must not
be used by any other bus device either. In the ETS, the virtual physical addresses
should be allocated by dummy devices. The additional addresses for the KNXnet/IP
Tunnelling can either be assigned manually in the ETS by the communication
settings or automatically by the device itself. To configure the communication
interface (physical interface of the first tunnel connection) in the ETS 5, the following
steps must be carried out.
In ETS 5, on the tab, open the subitem Bus Connections -> Interfaces
If the IP interface is online in the same network as the commissioning PC, this will
already be shown here, otherwise it can be created using the "New" button.
Especificaciones del producto
Marca: | Jung |
Categoría: | Router |
Modelo: | IPR 200 REG |
¿Necesitas ayuda?
Si necesitas ayuda con Jung IPR 200 REG haz una pregunta a continuación y otros usuarios te responderán
Router Jung Manuales
22 Septiembre 2024
Router Manuales
- Router Samsung
- Router Huawei
- Router HP
- Router Motorola
- Router Topcom
- Router Alcatel
- Router Allnet
- Router Allied Telesis
- Router Apple
- Router Airlive
- Router Edimax
- Router Hikvision
- Router Arris
- Router BenQ
- Router Makita
- Router Thomson
- Router Gembird
- Router Black And Decker
- Router Asus
- Router Eminent
- Router Sitecom
- Router Metabo
- Router TP Link
- Router Manhattan
- Router Black Box
- Router ZTE
- Router Nilox
- Router Hama
- Router AVM
- Router Gigabyte
- Router Totolink
- Router Cisco
- Router Engenius
- Router KPN
- Router Netis
- Router Digitus
- Router Draytek
- Router Belkin
- Router Devolo
- Router Linksys
- Router Barco
- Router Buffalo
- Router Powerplus
- Router Porter-Cable
- Router Dahua Technology
- Router Netgear
- Router LevelOne
- Router BT
- Router Vodafone
- Router ICIDU
- Router Mercusys
- Router Planet
- Router ZyXEL
- Router Western Digital
- Router Clas Ohlson
- Router Konig
- Router Sweex
- Router Foscam
- Router D-Link
- Router Aruba
- Router Tenda
- Router Phicomm
- Router Teltonika
- Router Ubiquiti Networks
- Router Zoom
- Router Kasda
- Router Synology
- Router Trendnet
- Router Mikrotik
- Router ATen
- Router Digi
- Router RGBlink
- Router Hawking Technologies
- Router Kopul
- Router Nexxt
- Router Zolid
- Router SPL
- Router StarTech.com
- Router Holzmann
- Router Advantech
- Router Blustream
- Router Intellinet
- Router Lancom
- Router Ubee
- Router Kogan
- Router CradlePoint
- Router Sixnet
- Router Cudy
- Router F-Secure
- Router Digicom
- Router On Networks
- Router Atlona
- Router PENTAGRAM
- Router Nexaira
- Router Amped Wireless
- Router WyreStorm
- Router Mach Power
- Router Atlantis Land
- Router Keenetic
- Router Starlink
- Router Keewifi
- Router Luxul
- Router Silentwind
- Router Keezel
- Router Wisetiger
Últimos Router Manuales
27 Septiembre 2024
26 Septiembre 2024
26 Septiembre 2024
26 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
24 Septiembre 2024
24 Septiembre 2024
24 Septiembre 2024