Juwel AquaHeat Pro 200 Manual de Usario

Juwel No categorizado AquaHeat Pro 200

Lee a continuación 📖 el manual en español para Juwel AquaHeat Pro 200 (7 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

INSTRUCTION MANUAL

AquaHeat Pro

www.juwel-aquarium.com

Introduction

Thank you for choosing a JUWEL Aquarium product.

Our products represent over 50 years experience in the manufacturing of aquariums and their acessories applying most modern

production techniques bringing together the JUWEL Aquarium system, which is both easy to use and simple to maintain.

Please read this instruction manual carefully and completely to make sure you have received all components before setting up

the aquarium. Please observe the safety instructions and maintenance guidelines given in this manual.

This instruction manual has been carefully prepared to provide you with accurate and complete information. All efforts have

been made to ensure that the information given is correct. However, we cannot accept responsibility for printing or other errors.

Technical details are always approximate and are not warranted characteristics and may be subject to change without notice.

This product fulfils the guidelines issued by the European Union (EU) and is therefore entitled to carry the CE mark.

www.juwel-aquarium.de/en/declaration-of-conformity/

SAFETY INSTRUCTIONS:

This appliance can be used by children aged from 3 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

•

The power plugs of the electrical devices must not become moist. Connect

the power plugs to the power supply at such a height that the connection

cable forms a loop which would enable the water to drip down.

•

At all times, only operate the electrical devices for your aquarium (lighting,

heater, pump etc.) using an earth leakage circuit breaker (EL circuit breaker)

with a maximum tripping current of 30 mA. If the socket that you are using in

your home installation is not safeguarded with such a circuit breaker, please

use a commercially available power strip with an integrated earth leakage

circuit breaker.

•

The electrical devices may only be operated in rooms.•

Pull the power plug of all devices operated in water before coming into

contact with the water.

•

JUWEL AquaHeat Pro - Installing the heater in the JUWEL filter

system

Installation of the heater without the JUWEL Filter System

Recommendation:

The JUWEL automatic heater warms the water of your aquarium up to 28°C depending on a nomal room temperature of 21°C. If

you keep your aquarium in rooms below this or your fish need a higher temperature, we recommend to purchase a second

heater.

The JUWEL aquarium heater is supplied with the heater holder (fig. 1) which you

will need for the installation.

Please perform the following steps for all JUWEL Aquarium filter systems: (You may

need to start by removing an installed separation wall holder.)

1. Install the heater holder.

2. Attach the heater to the filter housing on the inside of the filter and/or initially insert

the heater holder into the guide rail of the separation wall.

The heater is properly positioned if the heater holder rests on the upper edge of the

housing and/or the separation wall.

The heater is now operational.

In order to allow the installation of the JUWEL Aquarium Automatic Heater we have

provided suction cups together with the heater.

First of all please attach the suction cups to the heater tube.

Thereafter, fasten the heater to the glass pane of your aquarium and check that it is

safely positioned.

You achieve the best result if you remove some of the water from the aquarium

beforehand and clean that part of the glass pane to which you wish to fasten the

heater. Please ensure that the heater is positioned in such a way that the heater

head is above the water level.

Having installed the heater in your aquarium you may refill it again and connect the

heater to the power supply.

Please observe that the heater may be damaged irreversibly, if it is operating

without or in an insufficient level of water.

Especificaciones del producto

Marca:	Juwel
Categoría:	No categorizado
Modelo:	AquaHeat Pro 200
Peso.:	140 g
Ancho:	60 mm
Profundidad:	120 mm
Altura:	24 mm
Peso del embalaje:	200 g
Ancho del embalaje:	42 mm
Empaquetadura en profundidad:	210 mm
Altura del embalaje:	142 mm
Tecnología de conectividad:	Bedraad
Destinado a:	PC
Certificados de sostenibilidad:	RoHS
Soporta Windows:	Ja
Conexiones:	1 - DB25 F
Interno:	Ja
Sistemas operativos compatibles:	Windows 98SE/ME/2000/XP/Vista
Compatible con Linux:	Ja
Interfaz de host:	CardBus
Tipo CardBus Ranura PCMCIA:	Type II
Ratio de transferencia:	1.5 Mbit/s
Velocidad de transferencia de datos (máx.):	0.0015 Gbit/s
Interfaz de salida:	Parallel