Kelvinator KGC26SNA Manual de Usario

Kelvinator Calderas y calderas KGC26SNA

Lee a continuación 📖 el manual en español para Kelvinator KGC26SNA (16 páginas) en la categoría Calderas y calderas. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

Gas Continuous Flow Hot Water System

User Manual

2 contents Kelvinator gas continuous ﬂow hot water systems

Congratulations and thank you for choosing our gas

continuous ﬂow hot water system. We are sure you will ﬁnd

your new hot water system a pleasure to use. Before you use

your hot water system, we recommend that you read through

the entire user manual, which provides the description of the

hot water system and its functions.

To avoid the risks that are always present when you use

an appliance, it is important that the hot water system

is installed correctly and that you read the safety instructions

carefully to avoid misuse and hazards.

We recommend that you keep this instruction booklet

for future reference and pass it on to any future owners.

After unpacking the hot water system please check it is not

damaged. If in doubt, do not use the hot water system but

contact your local Electrolux Customer Care Centre.

NOTE: The actual gas heating appliance that is part of this

gas continuous ﬂow hot water system will here after be

refered to as "water heater" for the purposes of this manual.

The gas continuous ﬂow hot water system as a whole may

also be refered to as "hot water system" for simplicity.

environmental tips

Information on disposal for users

• Most of the packing materials are recyclable.

Please dispose of those materials through your local

recycling depot or by placing them in appropriate

collection containers.

• If you wish to discard this hot water system, please

contact your local authorities and ask for the correct

method of disposal.

• Contact an authorised installer for installation of this hot

water system.

• Contact an authorised service technician for repair or

maintenance of this hot water system.

• If the power cord is to be replaced, replacement work

must be performed by authorised personnel only.

• Installation work must be performed in accordance

with national standards by authorised personnel only.

Wrong connection can cause over heating or re.

• This hot water system should be installed in accordance

with AS/NZS 3000 and your electricity suppliers rules.

Conditions of use

This hot water system is intended to be used in household

and similar applications such as :

• staff kitchen areas in shops, ofces and other working

environments.

• farm houses.

• by clients in hotels, motels and other residential type

environments.

• bed and breakfast type environments.

Important ..........................................................................3

Important safety instructions ...........................................4

Speciﬁcations ....................................................................5

Your gas continuous ﬂow hot water system 6 ....................

How it works 6 ..................................................................

Initial operation ...............................................................7

Normal operation ............................................................8

Freeze prevention .............................................................9

Winter shutdown .............................................................9

Maintenance and service ................................................ 10

Water heater draining and ﬁlter cleaning ..................... 10

General troubleshooting ................................................. 11

Warranty .......................................................................... 15

Congratulations Contents

This User Manual has been prepared for owners and users

of the hot water system. Please keep it in a safe place for

future reference.

Meanings of symbols used in this manual are shown below:

warning

This symbol indicates information concerning your

personal safety

caution

This symbol indicates information on how to avoid

damaging the hot water system

tips & information

This symbol indicates tips and information about

use of the hot water system

environmental tips

This symbol indicates tips and information about

economical and ecological use of the hot water system

For the installer

The installation must be completed in accordance with the

information supplied in the Installation Manual that comes

with your gas continuous ﬂow hot water system.

All other relevant National, State or Local regulations must

also be conformed with and these include (but are not

limited to):

• Australian Standard AS3500.1 – Water Supply

• Australian Standard AS3500.4 – Hot Water Supply

• Australian Standard AS3000 – Electrical Installation

• Australian Gas Association Code AS5601 –

Gas Appliance Installation

• Local Water, Gas & Electrical Authority Regulations

Municipal Building Codes

warning

Installation must be performed by a qualied installer (for

example, a licensed plumber or gas tter).

Inside you will ﬁnd many helpful hints on how to use and

maintain your hot water system properly.

Just a little preventative care on your part can save you a

great deal of time and money over the life of your hot water

system. You'll ﬁnd many answers to common problems

in the chart of troubleshooting tips. If you review the chart

of Troubleshooting Tips ﬁrst, you may not need to call

for service.

This symbol indicates never to do this

This symbol indicates always do this

warning

Connect with power properly.

Otherwise, it may cause electric shock or ﬁre due to

excess heat generation.

Always ensure effective earthing.

No earthing may cause electric shock.

Disconnect the power and turn off the gas inlet valve

to the hot water system if strange sounds, smell, or

smoke comes from it.

It may cause ﬁre and electric shock.

Do not operate or stop the water heater by switching

on or off the power.

It may cause electric shock or ﬁre due to heat generation.

Do not damage or use an unspecied power cord.

It may cause electric shock or ﬁre.

If the power cord is damaged, it must be replaced by

the manufacturer or an authorised service centre or a

similarly qualiﬁed person in order to avoid a hazard.

Do not modify power cord length or share the outlet

with other appliances.

It may cause electric shock or ﬁre due to heat generation.

Do not operate with wet hands or in a damp

environment.

It may cause electric shock.

Do not allow water to run into electric parts.

It may cause failure of machine or electric shock.

Do not use the socket if it is loose or damaged.

It may cause ﬁre and electric shock.

Do not open the water heater during operation.

It may cause electric shock.

Do not allow the power cord to rest close to hot

surfaces.

It may cause ﬁre and electric shock.

Do not disassemble or modify water heater.

It may cause failure and electric shock.

Important

Kelvinator gas continuous ﬂow hot water systems important notes 3

Especificaciones del producto

Marca:	Kelvinator
Categoría:	Calderas y calderas
Modelo:	KGC26SNA
Color del producto:	Wit
Peso.:	1600 g
Ancho:	165 mm
Profundidad:	139 mm
Bluetooth:	Nee
Formato de audio soportado:	AAC-LC, G.711, G.726
Formatos de vídeo soportados:	H.264, H.265
Stemcodecs:	AGC
factor vorm:	Dome
Enfoque automático:	Ja
Soporte de colocación:	Buiten
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Método de montaje:	Plafond
Resolución Máxima:	- Pixels
Número total de megapíxeles:	5 MP
Tipo de fuente de energía:	DC, PoE
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Vision nocturna:	Ja
Detección de movimiento por vídeo:	Ja
Rango focal:	4.7 - 47 mm
Tamaño del sensor óptico:	1/2.8 "
Tipo de sensor de imagen:	CMOS
Zoom óptico:	10 x
Certificados de sostenibilidad:	Federal Communications Commission (FCC)
Reducción de ruido:	Ja
El enfoque normal es diferente:	1.5 m
Distancia de detección (gran angular):	92.4 m
Distancia de detección (tele):	945.4 m
Distancia de observación (gran angular):	36.9 m
Distancia de observación (tele):	378.2 m
Distancia de reconocimiento (gran angular):	18.5 m
Distancia de reconocimiento (tele):	189.1 m
Distancia de identificación (gran angular):	9.2 m
Distancia de identificación (tele):	94.5 m
Wifi.:	Nee
Temperatura de funcionamiento (TT):	-30 - 55 °C
Humedad relativa de funcionamiento (VV):	10 - 100 procent
Funciones del sistema de videovigilancia inteligente (IVS):	Face detection, Human detection, Vehicle detection
Gama dinámica:	132 dB
Modo de panorámica automática:	Ja
Balance de blancos (cámara panorámica):	ATW, AWC