Kelvinator KHG640SS2 Manual de Usario

Kelvinator horno KHG640SS2

Lee a continuación 📖 el manual en español para Kelvinator KHG640SS2 (13 páginas) en la categoría horno. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
Built in Gas Hob
KHG950SS2/KHG640SS2
User and Installation Instruction
Guide to reading the instructions
The following symbols will help you
When reading the instructions:
Safety information
Step by step instructions
Suggestions and Advice
Information concerning environmental protection
This appliance complies with the following EEC Directives:
- 73/23 and 90/683 (relating to Low Voltage);
- 89/336 (relating to Electromagnetic Compatibility);
- 90/396 (relating to Gas Appliances);
- 93/68 (relating to the General Standards )
And subsequent amendments.
FOR YOUR SAFETY
This appliance is adjusted to operate on LPG only.
IF YOU SMELL GAS:
Turn off gas supply at bottle
Extinguish all naked flames;
Do not operate any electrical appliances
Ventilate the area
Check for leaks as detailed in this manual
If odour persists, contact your dealer or gas supplier immediately
BURN- CK (FIRE IN BURNER TUBE OR CHAMBER)BA
In the event of a burn-back, where the flame burns back to the jet, immediately
turn off the gas supply at the control valve on the panel. After ensuring the flame
is extinguished, re-light the appliance in the normal manner. Should the appliance
again burn back, close the control valve and call a service technician. Do not use
the appliance again until the service technician has declared that it is safe to do so.
GAS-PRESSURE REGULATOR
This appliance requires an operating pressure of 2,8 kPa at the appliance. A
suitable LPG regulator that complies with the requirements of SANS 1237 must
be installed.
IMPORTANT INFORMATION FOR THE USER
This appliance may only be installed by a registered LP Gas installer. All
registered installers are issued with a card carrying their registration number. Ask
to be shown the card before allowing the installation work to commence and make
a note of the Installer QCC number. Upon completion of the installation, the
installer is required to explain the operational details of the appliance together
with the safety instructions. You will be asked to sign acceptance of the
installation and be provided with a completion certificate. You should only sign
for acceptance of the installation when the installation is completed to your
satisfaction.
1

Especificaciones del producto

Marca: Kelvinator
Categoría: horno
Modelo: KHG640SS2

¿Necesitas ayuda?

Si necesitas ayuda con Kelvinator KHG640SS2 haz una pregunta a continuación y otros usuarios te responderán




horno Kelvinator Manuales

horno Manuales

Últimos horno Manuales