Kenton D-Sync Manual de Usario

Lee a continuación 📖 el manual en español para Kenton D-Sync (3 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
DDDD----SYNCSYNCSYNCSYNC
Bi-directional MIDI to DIN Sync Converter
Operating manual
2
Description
The D_SYNC has a MIDI Input and a MIDI Output for connecting to your MIDI
devices. The D_SYNC has an opto-coupled MIDI Input for optimum performance.
The D-Sync also has both a DIN Sync Input and a DIN Sync Output for connecting to
your sequencer and/or drum machine etc.
The D_SYNC is powered by a multi-region mains adaptor (supplied), so it doesn’t
need periodic battery changes to keep it working, enabling you to “fit and forget”.
If required, you can also power D-Sync from a USB port of your computer or USB
Hub.
Connecting
Plug the large plug end of the supplied USB lead into the supplied 5V power adaptor
and the other end into the D-Sync. Ensure the power adaptor is plugged in to the
mains and that the ACTIVE LED on the D_SYNC is on (steady green).
To convert MIDI to DIN Sync:
Connect the MIDI output of your keyboard(s) and/or computer to the MIDI Input of
the D_SYNC and connect the SYNC Out port of the D_SYNC to the DIN-SYNC input
of the device you want to control.
To convert DIN Sync to MIDI to MIDI:
Connect the DIN SYNC output of your keyboard and/or computer to the SYNC Input
of the D_SYNC and connect the MIDI Out port of the D_SYNC to the MIDI input of
the device you want to control.
You can convert in both directions at the same time if you need to do this.
The USB connector is used for power ONLY. D-Sync is not a USB MIDI device.
Status LED
:
The LED will show steady green when power is applied and flicker to indicate when
MIDI messages are being received.
Firmware version Request
:
A firmware version request must be issued within 10 seconds of power being applied
to the unit, otherwise it will be ignored.
The firmware version request message is - F0 00 20 13 16 60 F7 (hex)
The unit replies with the version number as F0 00 20 13 16 6F xx xx xx xx F7 (hex).
Where xx is a number in ASCII and the leftmost digit is the most significant.
For example - F0 00 20 13 16 6F 31 32 33 34 F7 (hex) = version number 1234
3
Specification
Power Input: USB Mini-B socket (used for power only)
Power : 5V DC regulated @ 50mA
MIDI ports: 1 x In, 1 x Out (5 pin DIN sockets)
SYNC ports: 1 x In, 1 x Out (5 pin DIN sockets)
Weight: 150g (excluding power supply)
Dimensions: 110 x 55 x 35 mm
Power supply: Multi-region switch mode power supply supplied with unit.
Warranty
The D_SYNC comes with a 12 month (from purchase date) back to base warranty,
(i.e. customer must arrange and pay for carriage to and from Kenton Electronics Ltd).
www.kenton.co.uk
Kenton Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
version 1v00 e. & o. e. 16th June 2015

Especificaciones del producto

Marca: Kenton
Categoría: No categorizado
Modelo: D-Sync
Color del producto: Zwart
Consumo-anual-de-energía: 43 kWu
Peso del embalaje: 7000 g
Ancho del embalaje: 789 mm
Empaquetadura en profundidad: 145 mm
Altura del embalaje: 466 mm
Clase de eficiencia energética (antigua): A
Diagonal de la pantalla: 26 "
Resolución: 1366 x 768 Pixels
Relación de aspecto original: 16:9
Formato de audio soportado: MP3
Formatos de vídeo soportados: AVI, H.264, MKV, MPEG1, MPEG2, MPEG4
red LAN: Nee
Modos de vídeo compatibles: 1080p
Cables suministrados: AC
Sistema de audio: Incredible Surround
Forma de pantalla: Flat
Brillo: 350 cd/m²
Tarjeta de garantía: Ja
Número de puertos USB 2.0: 1
Puerto(s) VGA (D-Sub): 1
Número de puertos HDMI: 1
Audio-ingan (L, R): 1
Entrada de vídeo compuesto: 1
Puerto DVI: Nee
Televisión inteligente: Nee
Altavoces incorporados: Ja
Energía promedio: 5 W
Consumo de energía (en espera): 0.3 W
Número de hablantes: 2
Salidas de auriculares: 1
Formato de señal analógica: PAL, SECAM
Consumo de energía (cuando está apagado): 0.3 W
tipo HD: HD
3D: Nee
Formato de imagen soportado: JPG
Tiempo de respuesta: - ms
Montaje VESA: Ja
Interfaz de montaje en panel: 200 x 100 mm
Relación de contraste (dinámica): 100000:1
Profundidad (sin base): 36.4 mm
Altura (sin base): 384 mm
Ancho (sin base): 628 mm
Peso (sin base): 4500 g
Diámetro de la pantalla en centímetros.: 66 cm
Entrada de PC (D-Sub): Ja
Interfaz común Plus (CI+): Ja
tipo de sintonizador: Analoog & digitaal
Formato de señal digital: DVB-C, DVB-T
televisión por internet: Nee
Ancho del dispositivo (con soporte): 628 mm
Dispositivo de profundidad (con soporte): 203.2 mm
Altura del dispositivo (con soporte): 426 mm
Peso (con soporte): 5000 g
soporte de escritorio: Ja
Posibilidades de ajustar las dimensiones de la pantalla.: 4:3, 14:9, 16:9, Auto
Teletexto: Ja
guía de televisión electrónica: Ja
Visualización en pantalla (OSD): Ja
Canal de retorno de audio (ARC): Ja
Frecuencia de actualización nativa: 60 Hz
Tecnología de interpolación de movimiento: PMR (Perfect Motion Rate) 100 Hz
Teletekst: 1000 pagina's
Número de puertos SCART: 1
Audio digital, conexión coaxial.: 1
Mando a distancia incluido: Ja
Wifi.: Nee
voltaje-de-entrada-de-CA: 220 - 240 V
Frecuencia-de-entrada-de-CA: 50 - 60 Hz
Consumo de energía (típico): 30 W
Baterias-incluidas: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Kenton D-Sync haz una pregunta a continuación y otros usuarios te responderán




No categorizado Kenton Manuales

No categorizado Manuales

Últimos No categorizado Manuales