Kicker L7R124 Manual de Usario

Kicker Altavoz de subgraves L7R124

Lee a continuación 📖 el manual en español para Kicker L7R124 (9 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

L7R10 | L7R12 | L7R15

Manual del Propietario | Español

ALTAVOZ PARA SONIDOS GRAVES

Benutzerhandbuch | Deutsch

TIEFTÖNER

Manuel d’utilisation | Française

HAUT-PARLEUR D’EXTRÊMES GRAVES

L7R

SUBWOOFERS

Owner’s Manual

SPECIFICATIONS

WIRING

L7R subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be connected to

a source of ampliﬁ cation. The dual 2 woofer will generate a 1 load if the coils are wired in parallel or a

4 load in series. The dual 4 woofer will provide a 2 load wired in parallel or 8 load wired in series.

The terminals with the white dots are for the ﬁ rst voice coil. The terminals with solid-red and solid-black

markings are for the second voice coil. See Figure 1.

L7R SUBWOOFER

OWNER’S MANUAL

Authorized KICKER Dealer:

Purchase Date:

Speaker Model Number:

Speaker Serial Number:

Model L7R10 L7R12 L7R15

Rated Impedance [Ω] 2 or 4 2 or 4 2 or 4

Fs [Hz] 33.6 30.1 22.5

Continuous Power Handling [Watts RMS] 500 600 900

Sensitivity [1W, 1m] 85.9 86.7 88.05

Xmax (Linear Excursion) [mm] 13.9 13.9 16.4

Re [Ω] 6.79 7.52 7.43

Qms 10.046 10.292 9.846

Qes 0.559 0.666 0.598

Qts 0.53 0.625 .564

Vas [ft³, L] 1.09, 30.87 2.37, 67.4 6.875, 194.7

Outer Frame Dimension [in, cm] 10 11/16, 27.2 12 9/16, 32 15 5/8, 39.6

Mounting Cutout [in, cm] 9 5/16, 23.7 11 1/16, 28.1 13 3/4, 34.9

Mounting Depth [in, cm] 6 1/8, 15.7 6 7/8, 17.4 8 3/8, 21.5

Frequency Response [Hz] 25–100 25–100 20–100

L7R10 / L7R12 / L7R15Models:

Note: All speciﬁ cations and performance ﬁ gures are subject to change. Please visit www.kicker.com for the most

current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER

Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.

WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning

up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at

the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently

damage your hearing. Please use common sense when controlling volume.

Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative

speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in

reference to the rest of the audio system.

BOX BUILDING NOTES

Use 3/4” (1.9cm) or thicker MDF (medium density ﬁ berboard) and seal the joints with silicone. Use the

“template” inside your L7R’s shipping carton to mark the mounting hole, then cut directly on the line.

These designs need internal bracing. Add triangular bracing between each of the larger unsupported

panels. See Figure 3.

All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented

enclosures the displacement of the port must be calculated and added to the internal volume of the ﬁ nal

design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example

the L7R12 vented Minimum design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (13.25” +

1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft3 / 1728 in3 ) = .77

ft3, and add this number to the internal volume of the enclosure, L7R12’s 1.75 ft3 + .77 ft3 = 2.52 ft3. See

Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and

back walls. It will be impractical to use round ports for these designs.

Figure 1 Series Wiring

Parallel Wiring

Figure 2

Cutout Dimensions

Dual 2Ω Voice Coils = 4Ω Load

Dual 4Ω Voice Coils = 8Ω Load

Dual 2Ω Voice Coils = 1Ω Load

Dual 4Ω Voice Coils = 2Ω Load

L7R10

L7R12

L7R15

13 3/4”

(34.9 cm)

11 1/16”

(28.1 cm)

9 5/16”

(23.7 cm)

13 3/4”

(34.9 cm)

11 1/16”

(28.1 cm)

9 5/16”

(23.7 cm)

Corner Radius:

L7R10 - 1-9/16” (3.9cm)

L7R12 - 1-13/16” (4.6cm)

L7R15 - 2” (5.1cm)

coil 1+

coil 2+

to ampliﬁ er +

to ampliﬁ er -

coil 2-

coil 1-