Kiloview RN03 Manual de Usario

Lee a continuación 📖 el manual en español para Kiloview RN03 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
RN03 3RU Video encoding and decoding Chassis
Leading solution provider of IP-based video transmission
Q ck Start Guide ui
Contents
Chassis installation
Encoding Application
Decoding Application
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the
device. Please strictly follow the instructions of this guide or install and use it under the guidance of professionals. Incorrect electrical connections or physical
installation may cause permanent damage to the device and even threaten personal safety.
1. RN03 Installation
Align the card assembly with the card slots and push in vertically, then tighten the double-sided screws.
Reverse the process for removal.
Note
The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the
same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis
has no centralize power supply, and each module needs to be powered separately for normal operation.
Tally-green light: indicates that the current video is in Preview state; red light: indicates that the current video is in
Program state.
The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the
same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis
has no centralize power supply, and each module needs to be powered separately for normal operation.
LED indicator. Power: always white indicates that power is connected LINK: white flashing indicates normal network
access Run: flashing white indicates normal work in progress LED indicator.
1.Fasten the device to the mount rack
2. Align and push the device in parallel
TYPE-C expansion
Tally light
LED indicator
2. Tighten the left and right screws
2. Application
2 Encoding applications.1
2 Decoding application.2
Note
The chassis does not provide centralized power supply for the codecs, and each codec needs to be powered separately
for normal operation. The fan is connected to the 12V power supply separately.
SDI Video source
LOOP
12VFa n Powered
Switcher
1 Power supply interface2V
Network
Monitor
Switcher
NDI input
12V Fan powered
12V Powersupply
interface

Especificaciones del producto

Marca: Kiloview
Categoría: No categorizado
Modelo: RN03

¿Necesitas ayuda?

Si necesitas ayuda con Kiloview RN03 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Kiloview Manuales

No categorizado Manuales

Últimos No categorizado Manuales