Konig CMP-BARSCAN30 Manual de Usario

Konig Lector de código de barras CMP-BARSCAN30

Lee a continuación 📖 el manual en español para Konig CMP-BARSCAN30 (48 páginas) en la categoría Lector de código de barras. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/48
CONTENTS
Getting Started ----------------------------------------------------------
2
Setup Procedures --------------------------------------------------------
3
Setup Menu---------------------------------------------------------------
4
Setup flow Chart --------------------------------------------------------
4
Group 0 : Interface Selection ----------------------------------------
5
Group 1 : Device Selection for keyboard interface---------------
6-7
Group 2 : Inter-character Delay -------------------------------------
8
Group 3 : Language for Keyboard Interface ----------------------
9-10
Group 4 : Terminator--------------------------------------------------
11-12
Group 5 : Scan Mode -------------------------------------------------
13-14
Group 6 : Preamble and Postamble ---------------------------------
15
Group 7 : Reserved ---------------------------------------------------
15
Group 8 : RS-232 Parameters ---------------------------------------
16-18
Group 9 : Code 39 / Code 32 ----------------------------------------
19-20
Group 10-1: Interleaved 2 of 5 ---------------------------------------
21
Group 10-2: Industrial 2 of 5 / IATA---------------------------------
22
Group 10-3: Matrix 2 of 5----------------------------------------------
23
Group 10-4: China Postage--------------------------------------------
24
Group 11 : Code 128/ Code 93/ Code 11/ MSI-PLESSEY------
25-26
Group 12 : ISBN/ISSN-------------------------------------------------
27
Group 13 : Codabar / NW7--------------------------------------------
28
Group 14 : Code 4------------------------------------------------------
29
Group 15-1 : EAN 13 / JAN 13---------------------------------------
30
Group 15-2 : UPC-A----------------------------------------------------
31
Group 15-3 : EAN-8 / JAN-8------------------------------------------
32
Group 15-4 : UPC-E / UCC EAN-128-------------------------------
33
Group 16 : General Parameters---------------------------------------
34
Group 17 : Code ID Settings------------------------------------------
35
Group 18 : Wand Type Parameters----------------------------------
36
Group 19 : Magnetic Parameters-------------------------------------
37-39
Group 20 : Function Key Emulation---------------------------------
40
Function Code for PC XT/AT
41-42
Table-Hex : Hexadecimal---
43
ASCII Table---------------
44
Hexadecimal-Decimal Conver
45
Pin Assignments of Scanner
46-47
1
Getting Started
Installing Keyboard Wedge Scanner
To install a keyboard wedge scanner, follow the steps listed below:
1) Make sure that the scanner has the correct Y (U)- cable for the system (a PC or terminal)
2) Turn off the power of the system
3) Unplug the keyboard from the system
4) Connect the Y (U)- cable to the system and keyboard
5) Turn on the power of the system
6) If the indicator LED lights up and the buzzer sounds, the scanner is ready for reading
Installing a RS-232 Interface Scanner
To install a RS-232 interface scanner, the host device should have a RS-232 port to
receive data from the scanner, follow the steps listed below:
1) Make sure that the scanner has the right connector for the RS-232 port of the host device
2) Make sure that there is a power supply to the scanner (if necessary)
3) Connect the cable to the RS-232 port of the device
4) If the indicator LED lights up and the buzzer sounds, the scanner is ready for reading
2
Setup Procedures
1) Locate a group that contains the parameters to be changed.
2) Scan the “Enter Group #” label. The scanner will sound beeps indicate that setup is in progress
3) Scan the label representing the parameter to be changed
4) Scan the “Exit” to end the group currently selected, the scanner will sound beeps.
5) Repeat the procedure for other groups including the parameters to be changed
Example 1:
Set the operating mode to “Continuous mode”
1) Scan “Enter Group 5”
2) Scan “Continuous/Trigger off”
3) Scan “Exit”
Example 2
Assign Preamble string as “#”, and postamble string as “END”
1) Scan “Enter Group 6”
2) Scan Preamble”
3) Scan “#” from “Full ASCII Table and Table-Hex.”
4) Scan “Confirm” Label in Table-Hex
5) Scan “Postamble”
6) Scan “E”, “N”, “D” from “Full ASCII Table and Table Hex” consecutively
7) Scan “Confirm” Label in Table-Hex.
8) Scan Exit
3

Especificaciones del producto

Marca: Konig
Categoría: Lector de código de barras
Modelo: CMP-BARSCAN30

¿Necesitas ayuda?

Si necesitas ayuda con Konig CMP-BARSCAN30 haz una pregunta a continuación y otros usuarios te responderán


Lector de código de barras Konig Manuales

Konig

Konig CMP-BARSCAN30 Manual de Usario

16 Agosto 2024

Lector de código de barras Manuales

Últimos Lector de código de barras Manuales

Datalogic

Datalogic Magellan 8302 Manual de Usario

27 Octubre 2024
Casio

Casio Cassiopeia IT-10 M30BR Manual de Usario

23 Octubre 2024
Intermec

Intermec CN50 Manual de Usario

20 Octubre 2024
Intermec

Intermec SR60 Manual de Usario

19 Octubre 2024
Honeywell

Honeywell 7980G-2USBC-0 Manual de Usario

11 Octubre 2024
Datalogic

Datalogic CBX500 Manual de Usario

9 Octubre 2024
Honeywell

Honeywell 7800LWN Manual de Usario

6 Octubre 2024
Datalogic

Datalogic QuickScan L QD2300 Manual de Usario

5 Octubre 2024
Renkforce

Renkforce 7A CR6307A Manual de Usario

3 Octubre 2024
Honeywell

Honeywell Dolphin 99EX Manual de Usario

3 Octubre 2024