Konig CMP-SMARTRW10 Manual de Usario
Konig
terminal de pago
CMP-SMARTRW10
Lee a continuación 📖 el manual en español para Konig CMP-SMARTRW10 (66 páginas) en la categoría terminal de pago. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/66
CMP-SMARTRW10
Smartcard Reader
Introduction Smartcard Reader
This model enables data transmissions through the USB interface, and
realizes secure and fast smart card transactions. This reader/writer is perfect
for personal smart card use, such as authentication or electronic payment.
This smart card reader / writer is an easy way to make existing PC’s smart
card capable. The smart card reader has the potential to enable smart cards to
become a viable form of payment on the internet.
Installation Manual for the Smart Card Reader
The installation steps of the Smart Card Reader’s setup driver:
If the driver of the smart card reader has been installed before, please delete
the program, restart the computer and reinstall the setup driver of the smart
card reader.
When you restart the driver don’t restart the computer. Restarting will cause
the installation program to fail.
Step one: Put the CD into the CD-ROM and choose (double-click) “Driver.exe”
program to start launching driver setup.
Step two: System will begin to install the driver (the progress could take
several minutes)
Step three: When the desk is shown the “nish”, please click it; i.e. nish the
installation
Step four: When installation is conrmed well, you can begin to use it
normally.
Step ve: Connecting the smartcard reader will shown “EMV certied USB
Smart Card Reader” on the system.
Step six: After installing, there will be shown “the new system is installed well
and can begin to use”
Remarks: After it, you can check whether there is the “Generic USB Smart
Card Reader” folder on the “Set Administrator”.
1
Installation Manual for the eCash Checker
Step one: Put the CD into the CD-ROM and then choose the “inquiry system
of the eCash checker’’ folder;
Step two: Open the folder and double-click the “Setup”; The system will start
to install.
Step three: After installation, you can use it.
The inquiry functions of the eCash’s balance;
Click the “Start”-“All program”-“Inquiry program of the eCash”.After these, you
can use it.
When you come into the program, please plug the inquiry card into the Smart
card reader. Then, click the “Enact Smart Card Reader” at rst and click the
“Inquiry Balance”;i.e. you can begin to use it.
Important Amendment Notice for Internet Explorer User
Step 1: Conrm the Operation System (OS)Windows 98 or newer, and used
with Internet Explorer 6.0 or newer
Step 2: Install the driver of the chipset reader
2.1: Use the Driver CD attached in the packaging
2.2: Do not insert the chipset reader when installing the driver
Step 3: IE (Internet Explorer) Setup Amendment
3.1: When accessing to the ATM System of bank terminal at the rst time,
the ATM system will pop-up a dialogue for “Security Warning”, Please press
“YES” to install the component of ATM system which is necessarily run during
trading.
In order to download the component successfully, please refer to the instruction
of IE setup steps in Step 3.2
It is about 10 seconds up to 1 minute for downloading the component (Depends
on your network and computer compatibility).
2
Especificaciones del producto
| Marca: | Konig |
| Categoría: | terminal de pago |
| Modelo: | CMP-SMARTRW10 |
¿Necesitas ayuda?
Si necesitas ayuda con Konig CMP-SMARTRW10 haz una pregunta a continuación y otros usuarios te responderán
terminal de pago Konig Manuales
15 Agosto 2024
terminal de pago Manuales
- terminal de pago Adyen
- terminal de pago Akasa
- terminal de pago Cherry
- terminal de pago Manhattan
- terminal de pago Trust
- terminal de pago Genie
- terminal de pago Axis
- terminal de pago POSline
- terminal de pago Emdeon
- terminal de pago HID Identity
- terminal de pago On-Q
- terminal de pago Approx
Últimos terminal de pago Manuales
4 Octubre 2024
10 Septiembre 2024
7 Septiembre 2024
1 Septiembre 2024
30 Agosto 2024
30 Agosto 2024
30 Agosto 2024
29 Agosto 2024
29 Agosto 2024
27 Agosto 2024