Konig HAV-PR40 Manual de Usario

Konig Radio HAV-PR40

Lee a continuación 📖 el manual en español para Konig HAV-PR40 (21 páginas) en la categoría Radio. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/21
www.konigelectronic.info
HAV-PR40
4 BAND RADIO WITH ALARM CLOCK
Manual
4 BAND RADIO WITH ALARM CLOCK
OPERATING INSTRUCTION:
AM/FM/SW1/SW2 4 band radio with alarm clock
1) Telescope antenna 9) Alarm on/off
2) Handle bar 10) Hour
3) AC socket 11) Min
4) Battery compartment 12) Band switch
5) Power indicator 13) Tuning dial
6) LCD 14) Volume dial with power switch
7) Time set/light 15) Earphone jack
8) Alarm set
POWER SOURCE:
Battery operation
1) Open the battery cover.
2) Insert 2 “D size (UM-1 or equivalent) batteries into the battery
compartment, making sure that the batteries are installed with the
proper polarities (+ and -).
AC supply
1) Making sure the voltage selector is set to the correct position.
Connect the AC cord to the AC socket and the wall socket. The radio
is now ready to use.
2) To switch off the radio completely, pull the AC cord from the wall
socket.
To prevent possible damage to this radio:
Load new batteries with their polarities (+ and -) aligned correctly.
Do not apply heat to batteries, or internal short-circuit may occur.
If this radio is not to be used for a long period of time, remove all
batteries and store them in a cool and dry place.
Remove dead batteries immediately.
Do not use old and new batteries together. Do not use different type
of batteries
Battery life: If the sound becomes low or distorted, replace batteries
with new ones.
RADIO OPERATION:
1) Rotate the volume knob to turn the radio on and adjust it to desired
sound level.
2) Select the preferred frequency band (FM/AM/SW1/SW2) by sliding
the band switch.
3) Rotate the tuning knob to tune to the desired station. The display
shows the frequency.
4) Adjust the antenna (see antennas).
5) To switch off the radio, rotate the volume dial until a click is heard.
CLOCK FUNCTION:
1) Press and hold the TIME SET button, and press the HOUR button
until the correct hour is shown. Ensure that the AM/PM is set properly.
2) While holding the TIME SET button, press the MINUTE button until
the minute is shown.
TO SET THE ALARM TIME:
1) Press and hold the ALARM SET button, and a will appear on
the display to identify the alarm time. While holding the ALARM SET
ENGLISH
button, press the HOUR button until the desired hour is shown.
Ensure that the AM/PM is set properly.
2) While holding the ALARM SET button, press the MINUTE button until
the desired minute is shown.
3) After setting the alarm time, turn on the radio to select the station,
and turn the unit off.
4) Press the ALARM ON/OFF button will appear on the display.
The radio will turn on at the alarm time.
ANTENNAS:
FM:
Pull out the telescope antenna and adjust the length and angle for optimum
reception
AM:
The sensitive ferrite core antenna inside the radio will provide excellent AM
reception in most areas. Turn the radio in the direction which gives the best
results because the ferrite core antenna is directional.
SW1-2:
Fully and vertically extend the telescopic antenna.
HELPFUL HINTS:
If the radio is not used for a long period of time, remove the batteries
to prevent potential damage due to possible battery leakage.
Do not subject the radio to temperatures over 60°C (140°F) because
characteristics of the internal parts may be adversely affected by
heat. Never leave the radio in a car exposed to direct sunlight for a
long period of time with the doors and windows closed. The cabinet
may become deformed and deterioration of the performance may
result.
Because a strong magnet is used for the speaker, keep magnetized
tickets or personal credit cards, recorded tapes, watches etc. away
from the radio. The speaker magnet in the radio may damage them.
Do not place the radio near strong magnets such as those used in
radio television sets, speaker boxes etc. as these may cause the
frequency to drift.
Do not drop or subject the set to a strong impact since the set is
composed of precision parts.
Do not use benzene, thinners or any abrasive powder to clean the
cabinet. Wipe it with a soft cloth moistened with a mild soap and
water solution.
SPECIFICATIONS:
Power source: 2 “D” size/UM-1 batteries (DC-3V)
Frequency range: AM: 530-1600 KHz
FM: 87.5-108.0 MHz
SW1: 6.0-12 MHz
SW2: 12-18 MHz
Speaker: 8 3W
Power output: 150mW (RMS. Max)
Output jack: Earphone 32
WARNING:
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician if service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the
product to water or moisture.
WARRANTY:
No guarantee or liability can be accepted for any changes and modifications
of the product or damage caused due to incorrect use of this product.
GENERAL:
Designs and specifications are subject to change without notice.

Especificaciones del producto

Marca: Konig
Categoría: Radio
Modelo: HAV-PR40

¿Necesitas ayuda?

Si necesitas ayuda con Konig HAV-PR40 haz una pregunta a continuación y otros usuarios te responderán




Radio Konig Manuales

Radio Manuales

Últimos Radio Manuales