Konig HC-SH20N Manual de Usario

Lee a continuación 📖 el manual en español para Konig HC-SH20N (51 páginas) en la categoría cabezal de ducha. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/51
HC-SH20N
MANUAL (p. 2)
ANLEITUNG (S. 4)
MODE D’EMPLOI (p. 6)
GEBRUIKSAANWIJZING (p. 8)
MANUALE (p. 10)
MANUAL DE USO (p. 12)
MANUAL (p. 14)
HASZNÁLATI ÚTMUTATÓ (o. 16)
KÄYTTÖOHJE (s. 18)
BRUKSANVISNING (s. 20)
NÁVOD K POUŽITÍ (s. 22)
MANUAL DE UTILIZARE (p. 24)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 26)
BRUGERVEJLEDNING (s. 28)
VEILEDNING (s. 30)
ИНСТРУКЦИЯ (32 стр.)
KILAVUZ (s. 34)
KASUTUSJUHEND (lk. 36)
NÁVOD (s. 38)
ROKASGRĀMATA (lpp. 40)
NAUDOJIMO VADOVAS (42 p.)
PRIRUČNIK (str. 44)
РЪКОВОДСТВО (p. 46)
INSTRUKCJA OBSŁUGI (str. 48)
PRIROČNIK (str. 50)
Multicolour LED Shower Head
ENGLISH
2
Please handle the product with care, to prevent damage to the shower head.
You are strongly recommended to read and follow the manual carefully before
use. Please do not use the product in a corrosive environment; otherwise the
product will not work properly for a long time.
Features of LED shower head
Material: ABS, Electroplating
Ambient temperature: 0–60 °C
Ambient humidity: 10–90%
Minimum water pressure: 0.2MPa
Multicolour with temperature control
Green colour: temperature lower than 32 °C
Blue colour: temperature between 33 and 41 °C
Red colour: temperature between 42 and 45 °C
Above 46 °C RED colour will ash
LED Quantity
8 high brightness LEDs with a diameter of 5mm.
Instructions for use
After the LED shower is well installed, open the tap, the power generation
device inside LED shower will be driven to make LED light when water pressure
reaches 0.2MPa.
Installation
Step 1: Put LED Shower Head onto hose that connects with water pipe;
Step 2: Open the tap completely, then LED shower will work properly.
Note: If LED shower is not working properly, please check if water pressure
reaches 0.2MPa.
If LED shower still fails to work, please contact your supplier.
ENGLISH
3
CAUTION
RISK OF ELECT RIC SHOCK
DO NOT OPEN
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician when service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be
mixed with general household waste. There is a separate collections system for these products.
This product has been manufactured and supplied in compliance with all relevant regulations and directives, valid for all
member states of the European Union. It also complies to all applicable specications and regulations in the country of
sales.
Formal documentation is available upon request. This includes, but is not limited to: Declaration of Conformity (and
product identity), Material Safety Data Sheet, product test report.
Please contact our customer service desk for support:
via website: http://www.nedis.com/en-us/contact/contact-form.htm
via e-mail: service@nedis.com
via telephone: +31 (0)73-5993965 (during oce hours)
NEDIS B.V., De Tweeling 28, 5215 MC ’s-Hertogenbosch, THE NETHERLANDS

Especificaciones del producto

Marca: Konig
Categoría: cabezal de ducha
Modelo: HC-SH20N

¿Necesitas ayuda?

Si necesitas ayuda con Konig HC-SH20N haz una pregunta a continuación y otros usuarios te responderán