Konig PA-AMP4800-KN Manual de Usario

Konig receptor PA-AMP4800-KN

Lee a continuación 📖 el manual en español para Konig PA-AMP4800-KN (68 páginas) en la categoría receptor. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/68
PA-AMP2400-KN / 4800-KN
PA-AMP6000-KN / 10000-KN
PA-AMP15000-KN / 20000-KN
2
POWER AMPLIFIERS
8
PA VERSTÄRKER
14
AMPLIFICATEURS DE PUISSANCE
20
VERSTERKERS
26
AMPLIFICATORI DI POTENZA
32
AMPLIFICADORES DE POTENCIA
38
ERŐSÍTŐK
44
TEHOVAHVISTIMET
50
EFFEKTRSTÄRKARE
56
VÝKONOVÉ ZESILOVAČE
62
AMPLIFICATOARE DE PUTERE
2
ENGLISH
Introduction:
A semi-professional amplifi er series which ts standard 19” rack cabinets. This amplifi er is
ideal for starting DJs, who desire excellent product reliability. A built-in cooler takes care of
good ventilation and a peak level indicator gives control over the output level. For maximum
exibility there is a choice of various speaker connections like a lockable SPK connector,
binding posts or XLR.
Important information before use:
Keep suffi cient space around the amplifi er to allow adequate air circulation. Also when
mounted in a fl ight case, make sure the airfl ow is not obstructed.
Always switch on the amplifi er after switching on the other equipment and always switch
it off before the other equipment is switched off. If possible with the volume controls set at
minimum, this will avoid annoying and sometimes dangerous signal peaks.
Make sure the amplifi er is switched off when connecting or disconnecting any cables of the
system equipment.
Make sure the amplifi er is also off before disconnecting the power cord from the mains
socket.
The electric system and mains socket have an adequate grounding, compatible with the
safety norms.
Be sure the required voltage for the amplifi er complies with the local voltage of the mains
circuit.
Never connect loudspeakers with a lower resistance (Ohm) as required by the amplifi er (see
specifi cations).
3
Description front panel:
1
543
2
1. Ventilation opening
2. Volume control LEFT
3. LED indicators
- CLIP:LED lights up when the amplifi er is reaching it‘s peak power (Note: reduce the volume
to avoid damage to amplifi er and/or loudspeakers)
- SIGNAL: LED lights up with incoming signal from connected equipment
- POWER: LED lights up when the amplifi er is switched on.
4. Volume control RIGHT
5. Power on/off switch

Especificaciones del producto

Marca: Konig
Categoría: receptor
Modelo: PA-AMP4800-KN
Puerto USB: Ja
versión USB: 1.1
Tipo de sensor de imagen: CCD
Compatibilidad con Mac: Nee
Interfaces estándar: USB 1.1
tipo de escáner: Visitekaartjesscanner
Espacio mínimo de almacenamiento en disco: 120 MB
Entrada de profundidad de color: - Bit
RAM mínima: 64 MB
Tamaño máximo de escaneo: 86 x 60 mm
Escaneos en color: Nee
Escaneo de películas: Nee
Escaneo de superficie plana (b/n, A4): 5 sec/pagina

¿Necesitas ayuda?

Si necesitas ayuda con Konig PA-AMP4800-KN haz una pregunta a continuación y otros usuarios te responderán




receptor Konig Manuales

receptor Manuales

Últimos receptor Manuales