Konig SAS-AHD1004 Manual de Usario
Konig
grabadora de voz
SAS-AHD1004
Lee a continuación 📖 el manual en español para Konig SAS-AHD1004 (49 páginas) en la categoría grabadora de voz. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/49
Security
Sets
SAS-AHDxx
User manual
Main Board Sensor Industrial Embedded Microprocessor
Operating System Embedded LINUX operating system
Signal Support AHD, IPC, CVBS, TVI, CVI (5 in 1)
Video Coding H.264
Video Format 4CH / 8CH 1080p
Video Frame PAL: 1 - 25 FPS / NTSC: 1 - 30 FPS
Double Stream Support
Interface USB Port (2x), RS485, SATA HDD (max 8 GB), VGA, HDMI, CVBS,
BNC (4x / 8x), RCA input, RCA output
Recording Mode Automatic / Manual / Scheduled / Motion Detection / Alarm Recording
Recording Resolution Self-adaption
Playback 4CH 1080p
Playback Mode Instant / Search / Event
Backup Mode USB / Network
Protocol Support TCP/IP, UDP, PPPoE, DHCP, DDNS, NTP etc.
P2P Cloud N_EYE Pro APP / www.yunyis.com
Supported access Mobile App (iOS / Android), UTC control, 3G, WIFI
Power 12 VDC
Power Consumption < 15W (no HDD)
Operating conditions -10 - 55 °C / 10 - 90% humidity
Phyiscal 255 x 215 x 45 mm / < 1,5 KG (no HDD)
Sensor
System
Recording
Manage
Network
Power
Others
Figure Figure "A" "B"
Figure "C"
2
English
1. Connect
- Connect the cameras to the recorder with the coaxial cables using BNC connector
- Use the power splitter to power the cameras
- Connect the DVR to a TV or monitor using the preferred connector
- Connect the mouse using USB
- Connect the recorder to the internet using an Ethernet cable (if desired)
- Finally power up the recorder with the included power adapter.
2. Start Up
Press the start button and make sure the TV/monitor is set to the right input source. It will enter the real-time monitoring screen as
shown in gure : "A"
3. Navigation
Right-click anywhere to access the “Right-click menu”.
At rst attempt login is required, default username is admin, default password is 123456
Use the left mouse button to navigate through the menu, right click in the menu to go back.
4. Shutdown
- Right-click anywhere to access the “Right-click menu”, choose “Shut down system” and “Close”, or
- Long press the startup button at the front panel (not recommended as it may damage the hard disk)
5. Recovery
At sudden system power o, the recording video will be stored automatically and after reboot, the recorder will automatically
resume to the status before power o.
6. Recording
In the Record Cong menu you can set each camera’s recording schedule. By selecting the preferred recording mode and clicking
individual timeslots or dragging to set a larger timezone or to cover multiple days at once.
White means that no recording will be done in this timeslot, blue means constant recording is done and green means that
recording will only happen after motion is being detected.
After a schedule is nished, it can easily be copied to one or more cameras. See gure "B"
7. Motion detection
In right-click menu - main menu - system settings - output mode the motion detection can be enabled and dierent settings can
be set:
- 3 dierent sensitivity settings
- exact action(s) to take: Record one or more channels, take snapshot, send Email or show triggered camera fullscreen.
- Area setting (motion mask): if set only motion in the highlighted areas trigger the set action(s).
8. Playback
When watching back earlier recordings, you get the interface like gure :"C"
The 4 grey timelines at the bottom represent the 4 dierent channels. Dierently coloured areas indicate dierent types of
recording (scheduled, manual, alarm or triggered by motion detection).
Drag the timeline left or right to scroll in time, use the mouse’s scroll-wheel to zoom the timeline.
Double click on a specic time to play back the recording starting from the selected time.
9. Mobile Application
To access the DVR on your smartphone make sure the DVR is connected to the router and the network is congured correctly.
Download and open the App “N_EYE PRO”, login or register your account or use local login if you only need access from within
the local network. Add device using the plus sign and select Network Device. Scan the QR-tag shown at the DVR under P2P Cloud
or copy the requested network parameters. The App can automatically detect the number of cameras on this DVR. After saving you
will see all cameras added. On the top-right corner specic cameras can be switched on and o. Other options in the App include
playback and manual recording on smartphone.
3
Especificaciones del producto
| Marca: | Konig |
| Categoría: | grabadora de voz |
| Modelo: | SAS-AHD1004 |
¿Necesitas ayuda?
Si necesitas ayuda con Konig SAS-AHD1004 haz una pregunta a continuación y otros usuarios te responderán
grabadora de voz Konig Manuales
6 Agosto 2024
30 Julio 2024
grabadora de voz Manuales
- grabadora de voz Sony
- grabadora de voz Philips
- grabadora de voz Panasonic
- grabadora de voz Grundig
- grabadora de voz Motorola
- grabadora de voz Olympus
- grabadora de voz Toshiba
- grabadora de voz Abus
- grabadora de voz Aiwa
- grabadora de voz Hikvision
- grabadora de voz Nedis
- grabadora de voz Kodak
- grabadora de voz RCA
- grabadora de voz Roland
- grabadora de voz DataVideo
- grabadora de voz Sanyo
- grabadora de voz Marantz
- grabadora de voz Audioline
- grabadora de voz Dahua Technology
- grabadora de voz Audiovox
- grabadora de voz GeoVision
- grabadora de voz Goclever
- grabadora de voz Planet
- grabadora de voz Swann
- grabadora de voz Zoom
- grabadora de voz Humax
- grabadora de voz Saramonic
- grabadora de voz Line 6
- grabadora de voz Blackmagic Design
- grabadora de voz EverFocus
- grabadora de voz M-Audio
- grabadora de voz Provision ISR
- grabadora de voz Neo
- grabadora de voz Epcom
- grabadora de voz Sound Devices
- grabadora de voz HiLook
- grabadora de voz Jammin Pro
- grabadora de voz Mach Power
- grabadora de voz Qian
Últimos grabadora de voz Manuales
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
21 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
11 Octubre 2024
11 Octubre 2024
10 Octubre 2024