Könner & Söhnen KS 4000iEG Manual de Usario
Könner & Söhnen
Generador
KS 4000iEG
Lee a continuación 📖 el manual en español para Könner & Söhnen KS 4000iEG (29 páginas) en la categoría Generador. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/29
Owner’s Manual
KS 3300i
KS 4100iE
KS 4100iEG
KS 8100iEG
KS 8100iE ATSR
Inverter Generator
Inverter Generator
in Soundproof Housing
EN
Please, read this manual
carefully before use!
KS 2000i S
KS 2000iG S
KS 4000iE S
KS 4000iEG S
KS 4000iE S ATS
KS 6000iE S
KS 6000iE S ATS
INTRODUCTION
SAFETY INFORMATION 1
Thank you for your purchase of Könner & Söhnen® products. This manual contains a brief description of
safety, use and debugging. More information can be found on the ocial manufacturer’s website in the
support section: konner-sohnen.com/manuals
You can also go to the support section and download the full version of the manual by scanning the QR code,
or on the website of the ocial importer of Könner & Söhnen products: www.konner-sohnen.com
Manufacturer reserves the right to make alterations into the generators, which may not be reected in this
manual. Pictures and photos of the product may vary from its actual appearance. At the end of this manual,
You may nd contact information which you are free to use in case of any issues occurrence.
All data, specied in this operation manual is the most up to date for the moment of its publishing. The cur-
rent list of service centers you can nd at the website of ocial importer: www.konner-sohnen.com
We care about the environment, therefore, we consider it expedient to save
We care about the environment, therefore, we consider it expedient to save
We care about the environment, therefore, we consider it expedient to save
We care about the environment, therefore, we consider it expedient to saveWe care about the environment, therefore, we consider it expedient to save
paper and leave in print a short description of the most important sections.
paper and leave in print a short description of the most important sections.
paper and leave in print a short description of the most important sections.
paper and leave in print a short description of the most important sections.paper and leave in print a short description of the most important sections.
Be sure to read the full version of the manual before
getting started!
Useful information while operating the machine.
Failure to follow the recommendations marked with this
sign may lead to serious injury or death of the operator
or third parties.
ATTENTION – DANGER!
IMPORTANT!
Pay attention to the number of phases of the genera-
tor and the electrical system. A three-phase generator is
only suitable for three-phase power consumers. Never
connect a three-phase generator to a three-phase home
network if there are no three-phase power consumers
When installing the generator, pay attention to the ca-
pacity of electrical appliances and their starting current,
which may be several times higher than the rated cur-
rent. The generator cannot run in overload conditions
when starting consumers with an inrush current higher
than the generator’s maximum output.
As exhaust gases contain poisonous carbon dioxide (CO2)
and carbon monoxide (CO) gases which are dangerous
for life, it is strictly forbidden to install the generator in
residential buildings, premises connected to residential
buildings by a common ventilation system, other rooms
from which exhaust gases may enter living premises.
ATTENTION – DANGER!
ATTENTION – DANGER!
ATTENTION – DANGER!
WORKING AREA
WORKING AREA
WORKING AREA
WORKING AREAWORKING AREA
konner-sohnen.com | 1
- The generator produces electricity that may lead to an electric shock while neglecting compliance regu-
lations.
- Könner & Söhnen generators were initially designed as an IT system with basic protection by insulation
of hazardous live parts according to DIN VDE 0100-410. The generator housing is insulated from the cur-
rent-carrying L and N conductors. The generator must be grounded in all cases, except for an IT system with
an insulated neutral wire and bonding. A grounded IT system requires the use of an insulation monitoring
device. Further details regarding the use of the generator in IT and TN systems can be found on our website
or requested from our technical support.
- All connecting the generator to the network must be made by certied electrician in accordance with all
electrical rules and regulations.
- It is not allowed to supply current from the electrical network to the generator when the power supply is
restored.
- Do not allow moisture in the generator. The water inside the device increases the risk of an electric shock.
- In the high humidity level conditions generator exploit is prohibited. Keep the generator in a dry place
only.
- Avoid direct contact with grounded surfaces (pipes, radiators, etc.).
- Be careful when working with power cables. Immediately replace it in case of damage, as damaged wire
increases the risk of electric shock.
- Network connection should only be carried out by a qualied technician
- Connect the generator to the protective ground before operation.
- Do not connect or disconnect a generator to electricity consumers, which are placed in water on a wet or
damp soil.
- Do not touch parts of the generator under voltage.
- Connect the generator to those customers only which meet the electrical characteristics and the rated
power of the generator.
The device generates electricity. Follow safety precautions
to avoid electric shock.
ATTENTION – DANGER!
The generator should be used as an IT or TN system
based on the application. Earthing and additional pro-
tective measures such as insulation monitoring or pro-
tection against accidental contact (residual current de-
vice) must be provided based on the application and the
system used.
IMPORTANT!
- Do not use generator in the rain, snow and high humidity conditions, do not touch the generator with wet
hands. It’s prohibited to leave it in direct sunlight in summer for a long time. It is recommended to store
and use the generatir under a canopy or in a well ventilated area.
- Place the generator on a at, hard surface, away from ammable liquids/gases (at a minimum distance of
1 m). Install the generator at a distance of not less than 1 m from the front control panel and not less than
50 cm on each side, including the upper part of the generator. To reduce vibration during operation and to
avoid damage to the surface, where the generator is installed, it is equipped with dampers.
- Please don’t use the generator near ammable gases, liquids or dust. When using the generator exhaust
system gets very hot. This may cause re or explosion of these materials.
- Be sure to follow cleanliness and good lighting in the work area. Clutter and poor lighting may cause an
injury.
- Do not let the presence of unauthorized persons, children or animals when working with generator. If
necessary, make sure to fencing the working area.
- Please use safety shoes and protective gloves when working with generator.
ELECTRICAL SAFETY
ELECTRICAL SAFETY
ELECTRICAL SAFETY
ELECTRICAL SAFETYELECTRICAL SAFETY
konner-sohnen.com | 2
Especificaciones del producto
| Marca: | Könner & Söhnen |
| Categoría: | Generador |
| Modelo: | KS 4000iEG |
¿Necesitas ayuda?
Si necesitas ayuda con Könner & Söhnen KS 4000iEG haz una pregunta a continuación y otros usuarios te responderán
Generador Könner & Söhnen Manuales
14 Septiembre 2024
Generador Manuales
- Generador Bosch
- Generador Philips
- Generador DeWalt
- Generador Honeywell
- Generador Vetus
- Generador Eurom
- Generador Generac
- Generador Subaru
- Generador Ozito
- Generador Gude
- Generador Black And Decker
- Generador Hyundai
- Generador Westinghouse
- Generador Moulinex
- Generador Taurus
- Generador Parkside
- Generador Sun Joe
- Generador Einhell
- Generador Voltcraft
- Generador Craftsman
- Generador Trotec
- Generador Honda
- Generador Powerfix
- Generador Bavaria
- Generador Simpson
- Generador Gys
- Generador Harvia
- Generador Defort
- Generador Superior
- Generador Fuxtec
- Generador Cocraft
- Generador Cecotec
- Generador Herkules
- Generador Lumag
- Generador Telair
- Generador Endress
- Generador GW Instek
- Generador EcoFlow
- Generador Black Decker
- Generador Bluetti
- Generador Anova
- Generador King Craft
- Generador Duromax
- Generador CrossTools
- Generador Jackery
- Generador Lifan
- Generador Rigol
- Generador Cleveland
- Generador Joy-it
- Generador Aim TTi
- Generador Full Boar
- Generador Duro Pro
- Generador Alpha Tools
- Generador Load Up
- Generador PowerTech
- Generador Woods
- Generador Ribimex
- Generador Powerhouse
- Generador PRAMAC
- Generador DuroStar
- Generador ThermaSol
Últimos Generador Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
25 Octubre 2024
17 Octubre 2024
12 Octubre 2024
10 Octubre 2024
3 Octubre 2024
2 Octubre 2024