Kontakt Chemie Plastik 70 Manual de Usario

Lee a continuación 📖 el manual en español para Kontakt Chemie Plastik 70 (42 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/42
SAFETY DATA SHEET
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Trade name or designation
of the mixture
PLASTIK 70
-
Registration number
DU2X-K87W-600G-DQM2
UFI:
None.
Synonyms
BDS002139AE
Product code
25-March-2022
Issue date
01
Version number
1.2. Relevant identified uses of the substance or mixture and uses advised against
Anti Corrosion Products
Identified uses
None known.
Uses advised against
1.3. Details of the supplier of the safety data sheet
CRC Industries Europe bv
Company name
Touwslagerstraat 1
Address
9240 Zele
Belgium
+32(0)52/45.60.11
Telephone
hse@crcind.com
www.crcind.com
CRC Industries UK Ltd.
Company name
Wylds Road
Address
Castlefield Industrial Estate
TA6 4DD Bridgwater Somerset
United Kingdom
+44 1278 727200
Telephone
+44 1278 425644
Fax
hse.uk@crcind.com
E-mail
www.crcind.com
Website
Tel.:(+44)(0)1278 72 7200 (office hours: 9-17h CET)
1.4. Emergency telephone
number
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification
applies.
Classification according to Regulation (EC) No 1272/2008 as amended
H222 - Extremely flammable
aerosol.
H229 - Pressurized container: May
burst if heated.
Category 1Aerosols
Physical hazards
H319 - Causes serious eye
irritation.
Category 2Serious eye damage/eye irritation
Health hazards
H336 - May cause drowsiness or
dizziness.
Category 3 narcotic effectsSpecific target organ toxicity - single
exposure
2.2. Label elements
Label according to Regulation (EC) No. 1272/2008 as amended
Contains: 1-METHOXY-2-PROPANOL; MONOPROPYLENE GLYCOL METHYL ETHER, Ethyl acetate,
n-Butyl acetate
SDS GREAT BRITAIN
Material name: PLASTIK 70 - Kontakt chemie - Europe
BDS002139AE Version #: 01 Issue date: 25-March-2022 1 / 12
Hazard pictograms
Signal word Danger
Hazard statements
H222
Extremely flammable aerosol.
H229
Pressurized container: May burst if heated.
H319
Causes serious eye irritation.
H336
May cause drowsiness or dizziness.
Precautionary statements
Prevention
P102
Keep out of reach of children.
P210
P211
Do not spray on an open flame or other ignition source.
P251
Do not pierce or burn, even after use.
P261
Avoid breathing mist/vapours.
P280
Wear protective gloves/protective clothing/eye protection/face protection.
Response Not assigned.
Storage
P410 + P412
Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
Disposal
P501
Dispose of contents/container in accordance with local/regional/national/international regulations.
Supplemental label information EUH066 - Repeated exposure may cause skin dryness or cracking.
EUH208 - Contains methyl methacrylate; methyl 2-methylprop-2-enoate; methyl
2-methylpropenoate, n-Butyl methacrylate. May produce an allergic reaction.
This mixture does not contain substances assessed to be vPvB / PBT according to Regulation
(EC) No 1907/2006, Annex XIII. The product does not contain components considered to have
endocrine disrupting properties according to REACH Article 57(f) or regulation (EU) 2017/2100 or
Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
2.3. Other hazards
SECTION 3: Composition/information on ingredients
Mixture
General information
Notes
Index No.
REACH Registration No.
CAS-No. / EC No.
%
Chemical name
Classification:
607-025-00-1n-Butyl acetate #01-2119485493-29123-86-4
204-658-1
25 - 50
Flam. Liq. 3;H226, STOT SE 3;H336
Classification:
603-064-00-31-METHOXY-2-PROPANOL;
MONOPROPYLENE GLYCOL
METHYL ETHER
#01-2119457435-35107-98-2
203-539-1
10 - 25
Flam. Liq. 3;H226, STOT SE 3;H336
Classification:
607-022-00-5Ethyl acetate #01-2119475103-46141-78-6
205-500-4
10 - 25
Flam. Liq. 2;H225, Eye Irrit. 2;H319, STOT SE 3;H336
Classification:
607-035-00-6methyl methacrylate; methyl
2-methylprop-2-enoate; methyl
2-methylpropenoate
#01-2119452498-2880-62-6
201-297-1
<0.25
Flam. Liq. 2;H225, Skin Irrit. 2;H315, Skin Sens. 1;H317, STOT SE
3;H335
Classification:
607-033-00-5n-Butyl methacrylate 01-2119486394-2897-88-1
202-615-1
<0.25
Flam. Liq. 3;H226, Skin Irrit. 2;H315, Eye Irrit. 2;H319, Skin Sens.
1;H317, STOT SE 3;H335
List of abbreviations and symbols that may be used above
ATE: Acute toxicity estimate.
M: M-factor
PBT: persistent, bioaccumulative and toxic substance.
vPvB: very persistent and very bioaccumulative substance.
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. #: This
substance has been assigned Union workplace exposure limit(s).
SDS GREAT BRITAIN
Material name: PLASTIK 70 - Kontakt chemie - Europe
BDS002139AE Version #: 01 Issue date: 25-March-2022 2 / 12
The full text for all H-statements is displayed in section 16.
Composition comments
SECTION 4: First aid measures
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
General information
4.1. Description of first aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison
centre or doctor/physician if you feel unwell.
Inhalation
Wash off with soap and water. Get medical attention if irritation develops and persists.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Eye contact
In the unlikely event of swallowing contact a physician or poison control centre. Rinse mouth.
Ingestion
May cause drowsiness or dizziness. Headache. Nausea, vomiting. Severe eye irritation.
Symptoms may include stinging, tearing, redness, swelling, and blurred vision.
4.2. Most important symptoms
and effects, both acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
4.3. Indication of any
immediate medical attention
and special treatment needed
SECTION 5: Firefighting measures
Extremely flammable aerosol.
General fire hazards
5.1. Extinguishing media
Alcohol resistant foam. Dry powder. Carbon dioxide (CO2).
Suitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
Contents under pressure. Pressurised container may explode when exposed to heat or flame.
During fire, gases hazardous to health may be formed.
5.2. Special hazards arising
from the substance or mixture
5.3. Advice for firefighters
Firefighters must use standard protective equipment including flame retardant coat, helmet with
face shield, gloves, rubber boots, and in enclosed spaces, SCBA.
Special protective
equipment for firefighters
Move containers from fire area if you can do so without risk. Containers should be cooled with
water to prevent vapour pressure build up. For massive fire in cargo area, use unmanned hose
holder or monitor nozzles, if possible. If not, withdraw and let fire burn out.
Special fire fighting
procedures
Use standard firefighting procedures and consider the hazards of other involved materials. In the
event of fire and/or explosion do not breathe fumes.
Specific methods
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear appropriate protective equipment and clothing during clean-up. Avoid breathing
mist/vapours. Do not touch damaged containers or spilled material unless wearing appropriate
protective clothing.
For non-emergency
personnel
Keep unnecessary personnel away. Avoid breathing mist/vapours. Ventilate closed spaces before
entering them. Local authorities should be advised if significant spillages cannot be contained. Use
personal protection recommended in Section 8 of the SDS.
For emergency responders
Avoid discharge into drains, water courses or onto the ground.
6.2. Environmental precautions
Soak up with inert absorbent material. Stop leak if you can do so without risk. Move the cylinder to
a safe and open area if the leak is irreparable. Eliminate all ignition sources (no smoking, flares,
sparks, or flames in immediate area). Keep combustibles (wood, paper, oil etc) away from spilled
material. The product is immiscible with water and will spread on the water surface.
Large Spills: Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or
earth and place into containers. Scoop up used absorbent into drums or other appropriate
container. Following product recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use.
6.3. Methods and material for
containment and cleaning up
For personal protection, see section 8 of the SDS. For waste disposal, see section 13 of the SDS.
6.4. Reference to other
sections
SDS GREAT BRITAIN
Material name: PLASTIK 70 - Kontakt chemie - Europe
BDS002139AE Version #: 01 Issue date: 25-March-2022 3 / 12

Especificaciones del producto

Marca: Kontakt Chemie
Categoría: No categorizado
Modelo: Plastik 70

¿Necesitas ayuda?

Si necesitas ayuda con Kontakt Chemie Plastik 70 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Kontakt Chemie Manuales

No categorizado Manuales

Últimos No categorizado Manuales