Kopul PDI-40 Manual de Usario

Kopul No categorizado PDI-40

Lee a continuación 📖 el manual en español para Kopul PDI-40 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Thank you for choosing Kopul.

The Kopul PDI-40 High-Performance Passive Direct Box lets you connect

your unbalanced, high-impedance signal to a balanced, low-impedance

input. It is most often used for plugging an electric keyboard, guitar, or

bass guitar directly into a mixing console’s microphone-level input. The

PDI-40 can also be used in DJ applications for converting +10 dB DJ

mixer signals to balanced, line-level signals to facilitate longer cable runs

and to interface with mixing consoles.

The PDI-40 features a parallel output to connect to an amplier, an

attenuation switch to lower the signal input by -20 or -40 dB, and a

ground-lift button to minimize hum noise or ground loops.

Pro Audio Solutions

High-Performance

Passive Direct Box

PDI-40

Three-Year Limited Warranty

This Kopul product is warranted to the original purchaser to be free from defects in

materials and workmanship under normal consumer use for a period of three (3)

years from the original purchase date or thirty (30) days after replacement,

whichever occurs later. The warranty provider’s responsibility with respect to this

limited warranty shall be limited solely to repair or replacement, at the provider’s

discretion, of any product that fails during normal use of this product in its

intended manner and in its intended environment. Inoperability of the product or

part(s) shall be determined by the warranty provider. If the product has been

discontinued, the warranty provider reserves the right to replace it with a model of

equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect,

accident, alteration, abuse, improper installation or maintenance. EXCEPT AS

PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY

EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE. This warranty provides you with specic legal rights,

and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Kopul Customer Service Department to

obtain a return merchandise authorization (“RMA”) number, and return the

defective product to Kopul along with the RMA number and proof of purchase.

Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.kopulcables.com or call

Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Kopul is a registered trademark of the Gradus Group.

KOPUL

A Gradus Group Brand

GG3

Setting Up

1. Connect the output of your unbalanced source signal to the

PDI-40’s input. If you are using effects, insert them between

the source signal and the PDI-40, so you can monitor the

effects via both the amplier and the mixing console.

2. Set the attenuation switch to -20 dB. You can adjust this

later if necessary.

3. Connect your amplier’s input to the PDI-40’s para out.

4. Connect the microphone-level input of your mixing console

to the PDI-40’s balanced output.

If the source signal is too high or low, adjust the attenuation switch

as needed.

If you are experiencing buzzing or humming noises, press the

ground-lift button.

PDI-40 Pa s s ive Pro Direc t Box

Out

Sound Card

Parallel Out

Precautions

• Please read and follow these instructions and keep this manual in a safe place.

• Exposure to high sound levels can cause permanent hearing loss. Avoid listening at

high volumes for extended periods of time.

• Keep this product away from water and any ammable gases or liquids.

• Clean this product with only a soft, dry cloth.

• Keep this product away from children.

• Use only parts provided by the manufacturer.

• All photos are for illustrative purposes only.

Specications

Input

Para Out

Balanced output

Attenuation switch

Dimensions

Weight

1/4″

XLR

0, -20, -40 dB

4.7 × 3.0 × 1.7 in.″ ″

(12 × 7.6 × 4.2 cm)

15 oz. (425 g)

1. Input

2. Para Out

3. Attenuation switch

4. Balanced output

5. Ground-lift button

The input for your unbalanced, high-impedance

signal source.

Wired in parallel to the input, so you can output the

signal source through to an amplier. The signal

remains unchanged and is routed directly to the

amplier.

Attenuates the input by -20 or -40 dB.

The balanced, low-impedance output connects to

the mixing console’s microphone-level input.

Fully separates the input and output grounding to

minimize hum noise or ground loops. When the

button is pressed, the ground connection is

interrupted.

Overview

GROUND

ON | OFF

INPUT

50K Ω

PARA OUT

50K Ω

ATT

-0dB | -20dB | -40dB

BALANCED IN/OUT

600 Ω

Especificaciones del producto

Marca:	Kopul
Categoría:	No categorizado
Modelo:	PDI-40
Color del producto:	Zwart
Peso del embalaje:	29710 g
Ancho del embalaje:	1409 mm
Empaquetadura en profundidad:	259 mm
Altura del embalaje:	825.5 mm
Manual de usuario:	Ja
Bluetooth:	Nee
Diagonal de la pantalla:	46 "
Resolución:	1920 x 1080 Pixels
Relación de aspecto original:	16:9
red LAN:	Nee
Modos de vídeo compatibles:	1080p
Sistema de audio:	SRS TruSurround HD
Número de puertos HDMI:	3
Entrada de vídeo compuesto:	2
Vídeo de componentes (YPbPr/YCbCr):	1
Altavoces incorporados:	Ja
Energía promedio:	20 W
Número de hablantes:	2
tipo HD:	Full HD
Corriente de entrada:	Ja
Puerto RS-232:	1
3D:	Nee
Tecnología de visualización:	LCD
Tiempo de respuesta:	6 ms
Resoluciones de gráficos compatibles:	1920 x 1080 (HD 1080)
Montaje VESA:	Nee
Interfaz de montaje en panel:	Nee mm
Relación de contraste (dinámica):	60000:1
Profundidad (sin base):	78.74 mm
Altura (sin base):	718.8 mm
Ancho (sin base):	1127.76 mm
Peso (sin base):	19820 g
Entrada de PC (D-Sub):	Ja
Audio digital, salida óptica.:	1
tipo de sintonizador:	Digitaal
Formato de señal digital:	ATSC
televisión por internet:	Nee
Ancho del dispositivo (con soporte):	1127.76 mm
Dispositivo de profundidad (con soporte):	259 mm
Altura del dispositivo (con soporte):	767 mm
Peso (con soporte):	23680 g
subwoofer incorporado:	Nee
Posibilidades de ajustar las dimensiones de la pantalla.:	16:9
Tipo de retroiluminación:	CCFL
Aplicaciones de estilo de vida:	Nee
Iluminar desde el fondo:	Ja
Modo de juego:	Ja
Bandas de TV compatibles:	CATV, UHF, VHF
Mando a distancia incluido:	Ja
Wifi.:	Nee
Tiempo-de-dormir:	Ja