Kramer CRS-AOCH/COLOR-33 Manual de Usario

Kramer Cables para PC y periféricos CRS-AOCH/COLOR-33

Lee a continuación 📖 el manual en español para Kramer CRS-AOCH/COLOR-33 (4 páginas) en la categoría Cables para PC y periféricos. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Installation Instructions

MODEL:

CRS-AOCH/COLOR

Fiber Opc HDMI Cable

SAFETY WARNING

Disconnect the unit from the power supply before opening servicingand

For the latest information products a list Kramer distributors, visit our Web site where on our and of

updates to this user manual may be found.

We welcome your questions, comments, feedback.and

www.kramerAV.com

info@kramerel.com

P/N:

2900- 300699

Rev:

CRS-AOCH/COLOR Fiber Optic High Speed Pluggable HDMI Cable

Congratulations on purchasing your Kramer Plug and Play active Fiber Optic CRS-AOCH/COLOR

High Speed Pluggable HDMI Cable. The provides an extremely high quality CRS-AOCH/COLOR

signal over a wide range of resolutions, up to 4K@30Hz. This cable is available in various lengths

from 33ft (10m) up to 328ft (100m).

Features

The CRS-AOCH/COLOR:

 Supports a wide range of resolutions up to 4K@30Hz Full HD, 3D, Deep Color

 Supports Multi-channel audio, Dolby True HD, DTS- Master Audio HD

 Is HDMI compliant: EDID, CEC, HDCP

 Inherently provides protection from electromagnetic interference (EMI) and radio frequency

interference (RFI)

 Has built-in powering with low power consumption

 Has high pulling strength

Cable Dimensions

The CRS-AOCH/COLOR includes four optical ﬁbers and six AWG 28 wires with compact size HDMI

connectors. The cable has a SOURCE color end to which the source is connected (for green ed

example, a DVD, Blu-ray or game console box) and a DISPLAY colored end to which the acceptor red

is connected (for example, a projector, an LCD display or a tablet device), see . Figure 1

Figure 1: HDMI Connectors SOURCE and DISPLAY (with Dimensions) –

CRS-AOCH/COLOR Plug and Play Installation

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI

port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal source devices).

Kramer CRS-AOCH/COLOR Fiber Optic HDMI cables are designed to take

+5V DC power from the source devices to the HDMI pin #18 of the SOURCE

side connector on the cable.

Optical ﬁber cable is not robust physically compared to conventional copper

cable materials. Even if this cable is designed to be seamlessly resistant at

certain levels of artiﬁcial strengths to the cable, CRS-AOCH/COLOR can be

damaged if it is excessively pinched, twisted or kinked when being installed

and after being installed. Be careful not to bend or twist the cable tightly.

When is installed into the conduit, the ﬁber pulling CRS-AOCH/COLOR

strength and the bending radius are the key conditions to safe installation of

the cable:

Maximum ﬁber bending radius: 90mm

Maximum ﬁber pulling/tensile strength: 50kg (500N)

Crush Resistance: 50kg (500N)

Do not disassemble or modify the products, especially the HDMI connector

head parts. Do not remove the dust plug before the cable laying process is

completed. HDMI connector heads are very critical parts. Remove the head at

the last moment just before the connector is plugged into the source or the

display devices after the installation is complete.

To install the CRS-AOCH/COLOR:

1. Unpack the cable from the package with care and remove the cable tie.

We recommend that you save the original box and packaging materials for possible future

shipment.

2. Install the cable (for example, an in-wall or conduit installation or under-ﬂoor installations).

3. Once the cable installation is complete, remove the dust cap and plug the SOURCE green

connector head of the cable into the source devices.

Do not plug the SOURCE green connector to the display device.

4. Remove the dust cap and plug the DISPLAY connector head of the cable into the display red

devices.

Do not plug the DISPLAY connector to the source devicered .

5. Switch on the power of source and display devices.

Troubleshooting

If you have encountered a problem, check that:

 The source and display devices are both switched on

 Both HDMI connector heads are fully plugged into the devices

 The cable or its jacket not physically damaged is

 The cable is not bent or kinked

It is important to connect the cable correctly as marked on the end of each connector:

SOURCE ( to the source side and DISPLAY ( to the acceptor side.green) red)

Especificaciones del producto

Marca:	Kramer
Categoría:	Cables para PC y periféricos
Modelo:	CRS-AOCH/COLOR-33
Ancho:	170 mm
Profundidad:	170 mm
Modelo de procesador:	1037U
Adaptador gráfico:	HD Graphics
red LAN:	Ja
Tipo de fuente de energía:	ATX
Cables suministrados:	SATA
Número de puertos USB 2.0:	4
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
HDCP:	Ja
Fabricante del procesador:	Intel
Memoria interna máxima:	16 GB
Canales de salida de audio:	5.1 kanalen
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel® NM70 Express
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC662
Controladores suministrados:	Ja
Canal de memoria:	Dubbelkanaals
Interfaces de unidad de almacenamiento compatibles:	SATA II, SATA III
Puerto(s) PS/2:	2
Componente para:	PC
Controlador LAN:	Realtek RTL8111F
Adaptador de gráficos de memoria máxima:	1759 MB
Versión de DirectX:	11
Número de conectores SATA III:	1
Tipos de memoria soportados:	DDR3-SDRAM
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	mini ITX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	1333,1600 MHz
Soporte para procesamiento paralelo:	Niet ondersteund
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	1
Número de conexiones SATA:	4
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Salida-S/PDIF:	Ja
Número de conectores SATA II:	3
Ranuras PCI Express x16 (Gen. 2.x):	1
Encabezados de puerto serie:	1
Conector paralelo:	Ja