Kreg Shelf Pin Jig Manual de Usario

Kreg taladradora Shelf Pin Jig

Lee a continuación 📖 el manual en español para Kreg Shelf Pin Jig (72 páginas) en la categoría taladradora. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/72

English 2

French (N. America) 13

Spanish (N. America) 25

French 37

Spanish 49

German 61

O W N E R ’ S M A N U A L

We’re here to help.

We want you to have an exceptional project building experience.

If you have questions or need support, please get in touch.

1-800-447-8638 technicalsupport@kregtool.com |

Tell us about your experience.

Your opinion counts. And we’re always looking for ways to

improve. Share your feedback so we can keep growing and

innovating for you. www.kregtool.com/feedback

WARNING Every user must read and follow instructions and safety

precautions in this manual. Failure to do so could result in serious injury.

Save manual for future reference.

Kreg Shelf Pin Jig

Manual applies to Item # KMA3225, KMA3232, and KMA3232-INT

Safety Precautions

WARNING Before using a power tool with this product, read, and follow the

tool manufacturer’s instructions and safety precautions in addition to the safety

precautions below to reduce risk of serious injury from hazards such as re, electric

shock, or rotating drill bit.

■Follow your drill manufacturer’s safety guidelines.

■Follow your clamp manufacturer’s safety guidelines. Keep your hands clear when

clamping to avoid pinch points. The clamping limit on this jig is 300 lbs.

■When drilling, always ensure that the workpiece is clamped securely. It is

dangerous to hold the workpiece in place by hand.

■The drill bit is sharp; handle with care and avoid unintended cutting. The drill bit

may be hot after repetitive use.

■Always wear personal protective equipment certied as adequate in addition to

what your drill manufacturer requires.

■Do not allow familiarity gained from frequent use of your tools to replace safe work

practices. A moment of carelessness is sufcient to cause severe injury.

WARNING Avoid awkward hand positions where a sudden slip could cause contact

with the rotating drill bit.

WARNING Do not operate this tool or any machinery while under the inuence of

drugs, alcohol, or medications.

WARNING This product can expose you to chemicals including Acrylonitrile and

other chemicals, which are known to the State of California to cause cancer and

reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING Drilling, sawing, sanding, or machining wood products can expose you

to wood dust, a substance known to the State of California to cause cancer. Avoid

inhaling wood dust or use a dust mask or other safeguards for personal protection.

For more information go to www.P65Warnings.ca.gov/wood.

Table of Contents

Safety Precautions 2 . . . . . . . . . .

Pre-Assembly 3. . . . . . . . . . . . .

Assembly 4 . . . . . . . . . . . . . . .

Face-Framed Cabinets 5. . . . . . . .

Frameless Cabinets . . . . . . . . . 6

Operation 8 . . . . . . . . . . . . . . .

Using the Jig for Cabinet Hardware

Installation . . . . . . . . . . . . . . 9

Connect Jigs Together . . . . . . . .11

Maintenance . . . . . . . . . . . . .11

Care and Cleaning . . . . . . . . . .11

Troubleshooting . . . . . . . . . . .11

Accessories 11. . . . . . . . . . . . . .

Pre-Assembly

Review this section before you begin. Ensure you have all tools/materials on hand and

compare the package with the items listed in the Product Description section. If any

item appears missing or lost, do not use this product. Contact Technical Support or

return product to place of purchase.

Recommended Tools/Materials

Clamp Pencil

Product Description

Part Description Part Description

A Shelf Pin Jig E** Indexing pin

B Fence F Jig extension

C* Drill bit G Hex wrench

D Stop collar with set screw H 1/4" or 5 mm Shelf pins (4x)

*If replacement or different size drill bits are needed, 1/4" or 5 mm drill bits are available

separately.

**The indexing pin is double ended for both 1/4" and 5 mm shelf pin holes.

Especificaciones del producto

Marca:	Kreg
Categoría:	taladradora
Modelo:	Shelf Pin Jig
Color del producto:	Zwart
Ancho:	1219.2 mm
Número de lámparas:	48 lampen
tipo-de-lámpara:	LED
Actual:	1.6 A
Tipo de fuente de energía:	DC
Entrada de voltaje CC:	12 V
Certificación:	SAE J595 Class I, CE, R10
Número de LED:	48
Tipo-producto:	Lichtbalk
Número de efectos de iluminación:	9