Kress KG260E.9 Manual de Usario

Kress cortasetos KG260E.9

Lee a continuación 📖 el manual en español para Kress KG260E.9 (16 páginas) en la categoría cortasetos. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

SAFETY AND OPERATING MANUAL

Cordless Hedge Trimmer

KG259E KG259E.X

KG260E KG260E.X

Cordless Hedge Trimmer

KG259E KG259E.X

KG260E KG260E.X

PRODUCT SAFETY

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING Read all safety warnings,

instructions, illustrations and specications

provided with this power tool. Failure to follow the

warnings and instructions may result in electric shock,

ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases or

dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inuence of drugs,

alcohol or medication. A moment of inattention while

operating power tools may result in serious personal

injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce

dust-related hazards.

h) Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool safety

principles. A careless action can cause severe injury

within a fraction of a second.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do

the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free

from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control

of the tool in unexpected situations.

Especificaciones del producto

Marca:	Kress
Categoría:	cortasetos
Modelo:	KG260E.9
Color del producto:	Zwart
Material de la carcasa:	Aluminium
Tecnología de conectividad:	Bedraad
red LAN:	Nee
Lector de tarjetas de memoria integrado:	Nee
Micrófono, entrada de línea:	Nee
Opción de montaje de bloqueo de cable:	Ja
Tipo de ranura para candado de cable:	Kensington
Conexión para adaptador de red:	Ja
Cantidad por paquete:	1 stuk(s)
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo C:	2
Interfaz de host:	Thunderbolt
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo A:	2
Cantidad de puertos Thunderbolt:	2
Función de carga:	Ja