Kwikset SmartCode 911 Manual de Usario

Kwikset No categorizado SmartCode 911

Lee a continuación 📖 el manual en español para Kwikset SmartCode 911 (9 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/9
©2015 Spectrum Brands, Inc.
Programming and Troubleshooting Guide
Mastercode 2
Troubleshooting: Locked Turnbutton 6
Troubleshooting: Keypad 7
Troubleshooting: Battery 8
Battery FAQ 9
62815 / 01
1 / 9
Technical Support
1-800-327-5625
www.kwikset.com
1
3
2
4
5
©2015 Spectrum Brands, Inc.
Mastercode
Programming timeout: If no button is pressed for  ve seconds, the system will time out
and you will need to restart the procedure.
1. Keep door open. Press and HOLD the Program button until the keypad
ashes green (about 5 seconds).
2. Enter new Mastercode.
3. Press Lock button once.
4. Re-enter Mastercode.
5. Press Lock button once.
If programming is successful, the keypad will flash green once with
one beep.
If programming is unsuccessful, the keypad will ash red three times
with three beeps. Make sure the Mastercode has not already been
programmed. Attempt the procedure again, making sure to enter the
same new Mastercode in step 2 and 4.
6. Make sure switch #3 is on, and press the Program button once. If
you hear three beeps and see the keypad  ash green three times, the
Mastercode is enabled.
Note: The lock will time out after ve seconds.
Using a Mastercode is an optional, added-security measure. It is not enabled by default. A Mastercode is
used to add and delete user codes, but it cannot unlock the door (unless the same code is programmed
as a user code, though this is not recommended). The Mastercode must be 4-8 digits.
62815 / 01
2 / 9
Technical Support
1-800-327-5625
www.kwikset.com
1
A
B
About the Mastercode
Enabling and Setting the Mastercode
©2015 Spectrum Brands, Inc.
1. Keep door open. Press the Program button once. The keypad will  ash
green and you will hear three beeps.
2. Enter Mastercode.
3. Press Lock button once.
4. Press the Program button the number of times that corresponds to
the user code position being programmed.
Example: If programming the third code, press the button three times.
5. Enter new user code.
6. Press Lock button once.
The procedure for adding user codes is different when the Mastercode is enabled. For instuctions on how
to add user codes when the Mastercode is disabled, see the Installation and User Guide that came with
your lock.
Procedure continued on next page
62815 / 01
3 / 9
Technical Support
1-800-327-5625
www.kwikset.com
CAdding User Codes with the Mastercode Enabled

Especificaciones del producto

Marca: Kwikset
Categoría: No categorizado
Modelo: SmartCode 911

¿Necesitas ayuda?

Si necesitas ayuda con Kwikset SmartCode 911 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Kwikset Manuales

No categorizado Manuales

Últimos No categorizado Manuales