Kyoritsu KEW 2413R Manual de Usario

Kyoritsu multimetro KEW 2413R

Lee a continuación 📖 el manual en español para Kyoritsu KEW 2413R (7 páginas) en la categoría multimetro. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
KEW SNAP
Series
KEW 2413R
DIGITAL CLAMP METER
KYORITSU ELECTRICAL INSTRUMENTS
WORKSLTD.
INSTRUCTION MANUAL
 
1
 
 1.Safety Warnings
This instrument has been designed and tested according to I
Publication 61010: Safety Requirements for Electronic M
Apparatus. This instruction manual contains warnings
which must be observed by the user to ensure safe operation of the
instrument and retain it in safe condition. Therefore, roperating instructions before starting using the instrum
The symbol
#
indicated on the instrument means that the user must
refer to related parts in the manual for safe operation of th
instrument. Be
#
symbol in this manual.
#
DANGER
is reserved for conditions and actions that are likely to cause serious or fatal injury
#
WARNING
iscause serious or fatal injury
#
CAUTION
iscause bodily injury or instrument damage.
#
WARNING
Read through and understand instructions contained i
manual before starting using the instrument.
Save and keep the manual handy to enable quick refer
whenever necessary.
The instrument is to be used only in its intended ap Understand and follow all the safety instructions co
manual.
  Failure to follow the instructions may cause injury,
damage and/or damage to equipment under test. Kyorno means liable for any damage resulting from the inscontradiction to this cautionary note.
 
2
 
Following symbols are used on the instrument and in the instruction
manual. Attention should be paid to each symbol to ensure you
#
Refer to the instructions in the manual.
This symbol is marked where the user must refer to the instruc
manual so as not to cause personal injury or instrument damag
Indicates an instrument with double or reinforced insulation. Indicates that this instrument can clamp on bare conductors whmeasuring a voltage corresponding to the applicable Measuremcategory, which is marked next to this symbol.This instrument satisfies the marking requirement defined in thWEEE Directive (2002/96/EC). This symbol indicates separate collection for electrical and electronic equipment.
#
DANGER● Never make measurement on a circuit above 300V AC (CAT
Do not attempt to flammable gasseinstrument may c
● Transformer jaw tips are designed not to short the circuit un
test. If equipment under test has exposed conductive parts, however, extra precaution should be taken to minimize the possibility of shorting.
Never open the b
Never attempt to
Do not exceed th
Never try to make measurement if any abnormal conditions,
as broken Transformer jaws or case is noted.
● The instrument is be used only in its intended applications or
conditions. Otherwise,Safety functions equipped with the instrument doesn't work, and instrument damage or serious personal injury may be caused.
Keep your finger
#
WARNING● Never attempt to make any measurement if any abnormal
conditions are noted, such as broken case, cracked test leads and exposed metal parts.
● Do not install substitute parts or make any modification to the
instrument. Return the instrument to Kyoritsu or your distributfor repair or re-calibration.
● Do not try to replace the battery if the surface of the instrum

Especificaciones del producto

Marca: Kyoritsu
Categoría: multimetro
Modelo: KEW 2413R

¿Necesitas ayuda?

Si necesitas ayuda con Kyoritsu KEW 2413R haz una pregunta a continuación y otros usuarios te responderán




multimetro Kyoritsu Manuales

multimetro Manuales

Últimos multimetro Manuales