La Crosse Technology 617-710 Manual de Usario

Lee a continuación 📖 el manual en español para La Crosse Technology 617-710 (6 páginas) en la categoría radio reloj. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
SET UP GUIDE
MODEL: 617-710
Atomic Analog Alarm Clock
Power Up
2
SNOOZE/LIGHT Button
TIME ZONE Selector
DST Selector
REC Button
ALARM SET Knob
ALARM ON/OFF
Switch
Battery Compartment
RESET Button
SET Button
TIME ZONES
EST - Eastern
CST - Central
MST - Mountain
PST - Pacific
DST OPTIONS
ON - DST all year long
AUTO - Changes spring and fall
OFF - Standard Time all year long
1. Select your Time Zone and DST (Daylight Saving Time) settings on the back of
the clock.
2. Insert 1-AA battery into your Alarm Clock.
3. Position the clock near an exterior wall that faces Fort Collins, Colorado.
The hands will move to the 12 O’Clock position and remain there until the WWVB
Atomic Time Signal (page 4) is received.
Note: If your time is incorrect after the signal is received, press and release the
RESET button once using a paperclip or similar object - this will allow the clock to
set again correctly.
See page 3 for manual set instructions.
3
Set Time Manually
• For immediate setup, use a paperclip or similar object to hold the button inSET
until the hands reach the correct time.
• The clock will then run from this time and adjust according to the selectors on the
back if the Atomic Time Signal is picked up in the future.
Time Alarm
Set Alarm Time
Turn the knob counterclockwise until the Alarm Time Hand is at your ALARM SET
desired wake-up time. When the alarm sounds, it will increase in frequency until
snoozed or shut o using the ALARM ON/OFF Switch.
Activate/Deactivate the Alarm
Use the Switch on the side of the clock to activate (up) or ALARM ON/OFF
deactivate (down) the alarm.
Snooze
When the alarm sounds, press the button on the top of the clock to SNOOZE/LIGHT
silence the alarm for 5 minutes. Snooze may be repeated.
Night Light
Press the button on the top of the clock to enable the Night Light SNOOZE/LIGHT
for 5 seconds.
Clock Reset
If the clock isn’t working correctly, press the button with a paperclip or similar RESET
object. The clock should then follow the same startup process with the hands
moving to the 12 O’Clock position while it searches for the Atomic Time Signal.

Especificaciones del producto

Marca: La Crosse Technology
Categoría: radio reloj
Modelo: 617-710

¿Necesitas ayuda?

Si necesitas ayuda con La Crosse Technology 617-710 haz una pregunta a continuación y otros usuarios te responderán




radio reloj La Crosse Technology Manuales

radio reloj Manuales

Últimos radio reloj Manuales