La Crosse Technology 75900 Manual de Usario

Lee a continuación 📖 el manual en español para La Crosse Technology 75900 (1 páginas) en la categoría radio reloj. Esta guía fue útil para 16 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Caution: To prevent electrical shock do not use this (polarized) plug with an
extension cord, receptacle, or other outlet unless the blades can be fully inserted
to prevent blade exposure.
Two Year Limited Warranty (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase
against defects in material and workmanship. During this period such defects will be
repaired, or the product will be replaced at Equitys option, without charge. This
warranty does not cover damage caused by misuse or negligence. ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND
MERCHANTABILITY, ARE LIMITED IN DURATION T0 A PERIOD ENDING TWO YEARS FROM
DATE OF PURCHASE . Some states do not allow limitations on how long an implied
warranty lasts so the above limitation may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
CA UTION : TO RE DUCE THE
RI SK OF EL EC TR IC SH OCK ,
D O N OT R E M O V E C O V E R
( O N B A C K ) . N O U S E R -
S E R V I C E A B L E P A R T S
IN SI D E. RE F ER SE RV I CI N G
T O Q U A L I F I E D S E R V I C E
PERSONNEL.
Th e excl ama ti o n
po i nt wi t h i n t h e
triangle is a warning
sign alerting you of
impor tant instruc-
tions accompanying
the product.
The lightning flash
a n d ar r o w h e a d
within the triangle
is a wa rnin g sign
a l e r t i n g y o u o f
"dangerous voltage"
inside the product.
If your product is not working properly, please send:
- the product
- a letter explaining the problem
- and $5.00 for postage and handling to :
Equity by La Crosse
Warranty Department
2830 26th St. S.
La Crosse, WI 54601
Made in China Printed in China
0.9” LED ALARM CLOCK WITH USB CHARGING PORT
Model #75900
Warning: Do not make any repairs to the clock.
Changes or modications to this unit may invalidate the warranty.
1. Read Instructions-All the safety and operating instructions should be read before the
clock is operated.
2. Retain instructions - The safety and operating instructions should be retained for
future reference.
3. Warning - All warnings on the clock and in the operating shound be retained for
future reference.
4. Water and Moisture - The appliance should not be used near water - for example, near
a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming
pool, and /or the like.
5. Ventilation - The clock should be situated so that its location or position does not
interfere with its proper ventilation. For example, the clock should not be situated on
a bed, sofa, rug, or similar surface that may block the ventilation openings, or, place
in a built-in installation, such as a bookcase or cabinet that may impede the ow of air
through the ventilation openings.
6. Heat - The clock should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including ampliers) that produce heat.
7. Power Sources - The clocks should be connected to a power supply only of the type
described in the operating instructions or as marked on the clock.
8. Grounding or Polarization - Precautions should be taken so that the grounding or
polarization means are not defective.
9. Power-Cord Protection - Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at plugs, convenience receptacles, and the point where they exit
from the clock.
10. Cleaning - The clock should be cleaned only as recommended by the manufacturer.
11. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
12. Damage Requiring Service - The appliance should be serviced by qualied service
personnel in any of the following situations:
The power -supply cord or the plug has been damaged.
Objects have fallen, or liquid has been spilled into the clock.
The clock has been exposed to rain.
The clock does not appear to operate normally or exhibits a marked change in
performance.
The clock has been dropped, or the enclosure damaged.
13. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualied service
personnel.
www.equitybylacrosse.com/support www.equitybylacrosse.com/support
www.equitybylacrosse.com/support www.equitybylacrosse.com/support
off on-
hour minute time alarm
alarm
PM
ALARM
PM Light
Indicator
Alarm Light
Indicator
Time
Display
Hour
Minute
Time
Alarm
Alarm
On/Off
Please read this before operating your clock
Power Supply
When the AC cord is plugged in the display will go to 12:00 am.
P.M. indicator
A dot appears in the upper left hand corner of the display indicating that the time
shown is P.M.
Alarm ON indicator
A dot appears in the lower left hand corner of the display indicating that the alarm has been
activated.
Time setting
- Hold down the TIME button and press the HOUR button continously to forward the
hours to your desired hour setting.
- Hold down the TIME button and press the MINUTE button continuously to forward the
minutes to your desired minute setting.
Remember to set the correct AM or PM time. The PM light indicator will light up for PM
time.
USB charging port (USB Cord not included)
Charge a cell phone, mp3 player, camera or other portable device, or power any USB powered
device with the USB charging port. Use the USB cable that came with the portable device to connect
to the USB charging port. The USB port will provide power of up to 5V 1 AMP .
For additional support regarding the USB charging feature please visit:
www.equitybylacrosse.com/contact-customer-support
Alarm time setting
- Hold the ALARM button down and press the HOUR button continously to forward
the time to your desired hour setting.
- Hold the ALARM button down and press the MINUTE button continuously to forward
the time to your desired minute setting.
Remember to set the correct AM or PM time. Move the ALARM ON/OFF switch to the
ON position to activate the alarm. The ALARM light indicator will light up when the
Alarm is activated.
Alarm Operation and Snooze
Slide the ON/OFF switch to the ON position. When the alarm sounds, press the snooze
bar to get an extra 9 minutes of sleep.
Battery back up
In the event of power failure, the unit will automatically switch to a battery stand-by
circuit when batteries are installed. Open the BATTERY COMPARTMENT on the bottom
of the unit and install one “9V” Alkaline battery according to the polarity markings.
Under the battery operation, the clock will keep the time running and the alarm will
sound at the desired time. The clock display will not light up to save battery power. If
you have a long power outage, you may need a slight adjustment to the clock time after
the AC power is restored.
Please help in the preservation of the environment and return used batteries to an
authorized depot.
Remove the batteries from the clock if you do not intend to use for an extended period
of time.
USB output
DC 5V 1 A
USB Cord not included

Especificaciones del producto

Marca: La Crosse Technology
Categoría: radio reloj
Modelo: 75900

¿Necesitas ayuda?

Si necesitas ayuda con La Crosse Technology 75900 haz una pregunta a continuación y otros usuarios te responderán




radio reloj La Crosse Technology Manuales

radio reloj Manuales

Últimos radio reloj Manuales