Lanaform PO-110 Manual de Usario

Lee a continuación 📖 el manual en español para Lanaform PO-110 (80 páginas) en la categoría Monitor de frecuencia cardíaca. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/80
PO-110
PULSE OXIMETER
OXYGEN
SATUR ATION
PULSE
RATE
E-IM-PO110-002.indd 1
E-IM-PO110-002.indd 1
E-IM-PO110-002.indd 1
E-IM-PO110-002.indd 1E-IM-PO110-002.indd 1 06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:0006-03-23 14:53:00
E N G L I S H
Introduction
Thank you for choosing the pulse oxime-
ter by LANAFORM.
The Pulse Oximeter is a non-invasive
method used to measure blood oxygen
saturation (SpO2) by checking the percent-
age of oxygen-saturated haemoglobin and
measuring pulse rate. This process has
been in regular use now for twenty years
and is proving to be an essential control in
medical practice for maintaining oxygen
levels and preventing respiratory prob-
lems. The value of the oxygen saturation
may be regarded as dangerous if it is be-
low 90% for arterial blood. Normal value is
100% under normal atmospheric conditions.
Please read all the instructions before
using your product, particularly these
basic safety instructions.
The photographs and other images
of the product in this manual and on the
packaging are as accurate as possible,
but do not claim to be a perfect repro-
duction of the product.
Contents
01 Unpacking
02 Contents of the package
03 Symbols
04 Safety precautions
05 Product description
06 Product structure
07 Description of the screen
08 Settings
09 Instructions for use
10 About the display
11 Reading the measurements
12 Replacing the batteries
13 Fixing the strap
14 Cleaning and disinfecting routine
15 Maintenance
16 Technical specications
17 Safety category
18 Storage and transport
19 Manufacturers guidelines
and statement - Electromag-
netic emissions
20 Warranty
21 Waste disposal
22 After-sales service
1. Unpacking
Please open the packaging carefully be-
fore use. Check whether all the accessories
are present and whether any components
have been damaged during transport and
follow the installation and operating in-
structions in this manual. In the event of
any damage or malfunction, please con-
tact the reseller or Lanaform directly. In
the event of any complaint, you will need
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2E-IM-PO110-002.indd 2 06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:0006-03-23 14:53:00
the model of the device, serial number, date
of purchase, your details and your address.
2. Contents of the package
1 pulse oximeter
2 AAA batteries (supplied)
1 set of instructions for use
1 carrying cord
3. Symbols
The following marks and symbols may
appear in the instructions for use, on
the pulse oximeter and its accessories.
SYMBOL DESCRIPTION
Type BF applied part.
Due attention required.
Action that is prohibited.
Information about
the manufacturer.
Date of manufacture.
Consult the instruc-
tions for use.
SYMBOL DESCRIPTION
This product also complies
with the requirements of di-
rective MDD93/42/EEC.
Electrical waste must be
sent to a specialist collec-
tion point for recycling.
Level of protection against
water penetration.
Warning
Misuse of the device can
damage the oximeter or
cause physical injury.
Please
note
Misuse of the device can
damage the oximeter or
cause inaccurate readings.
%SpO2
Symbol of oxygen saturation
bpmPR
Symbol of pulse rate
No SpO2
alarms.
4. Safety precautions
Read the following precautions care-
fully before using the thermometer.
Please note
-Do not try to maintain the oximeter un
less you are a qualied professional.
Only qualied maintenance profession-
als are authorised to carry out internal
maintenance if necessary.
Do NOT use it
If you have allergic reactions to rub-
ber products,
if the device or your nger to be
used is damp,
on young children or infants
during an MRI or CT scan,
when transporting a patient outside
a medical establishment,
when taking blood pressure with a
sleeve on the arm,
on ngers that have nail varnish
on them, are dirty or have plas-
ters on them,
on very thick ngers that cannot
be inserted into the device without
E-IM-PO110-002.indd 3
E-IM-PO110-002.indd 3
E-IM-PO110-002.indd 3
E-IM-PO110-002.indd 3E-IM-PO110-002.indd 3 06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:0006-03-23 14:53:00

Especificaciones del producto

Marca: Lanaform
Categoría: Monitor de frecuencia cardíaca
Modelo: PO-110

¿Necesitas ayuda?

Si necesitas ayuda con Lanaform PO-110 haz una pregunta a continuación y otros usuarios te responderán