Lancom GS-3152X Manual de Usario

Lancom Cambiar GS-3152X

Lee a continuación 📖 el manual en español para Lancom GS-3152X (2 páginas) en la categoría Cambiar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

T E C H N I C A L D A T A

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111580/0120

Hardware

Power supply Internal power supply unit (100–240 V, 50-60 Hz, 1 A max.)

Power consumption Max. 65 W

Environment Temperature range 0–40° C; humidity 10–90 %, non-condensing

Housing Robust metal housing, 1 HU with removable mounting brackets for 19“ installation,

442 x 44 x 300 mm (W x H x D)

Number of fans 1

Interfaces

ETH

SFP+

A48 TP Ethernet ports 10 / 100 / 1000 Mbps

A4 SFP+ ports 1 / 10 Gbps

A52 concurrent ports in total

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with

Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of

Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package Content

Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting brackets Two 19” brackets for rack mounting;

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an accessory.

Cable IEC power cord 230 V, serial configuration cable 1.5 m

M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E

Reset

aConfiguration interface (Console)

Connect the configuration interface via the included serial

configuration cable to the serial interface of the device you want to

use for configuring / monitoring the switch.

bTP Ethernet interfaces

Use Ethernet cables to connect the interfaces 1 to 48 to your PC or

a LAN switch.

cSFP+ interfaces

Insert suitable LANCOM SFP modules into the SFP+ inter-

faces 49 to 52. Choose cables which are compatible with the

SFP modules and connect them as described in the module’s

documen tation.

dPower connector (device back side)

Supply power to the device via the power connector. Please use

the IEC power cable supplied or a country-specific LANCOM

Power Cord.

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

A Keep the ventilation slots on the side of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250.

APlease note that support for third-party accessories (SFP and DAC) is not provided.

LANCOM GS-3152X

Quick Reference Guide

C ud eadylo -r

d 10 G SFP+ ports

Off Port inactive or disabled

Blue Link 10 Gbps

Blue, blinking Data transfer, link 10 Gbps

Green Link 1 Gbps

Green, blinking Data transfer, link 1 Gbps

c TP Ethernet ports

Off Port inactive or disabled

Green Link 1000 Mbps

Green, blinking Data transfer, link 1000 Mbps

Orange Link ≤ 100 Mbps

Orange, blinking Data transfer, link ≤ 100 Mbps

b Reset button

Pressed until all port

LEDs are off

Device restart

Pressed until all port

LEDs glow permanently

Configuration reset and device restart

a System LED

Off Device powered off

Green Device operational

Red Hardware error

b dca c

b ca

Reset

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Especificaciones del producto

Marca:	Lancom
Categoría:	Cambiar
Modelo:	GS-3152X
Color del producto:	Zwart
Manual de usuario:	Ja
Bluetooth:	Nee
Mostrar.:	LCD
Comunicación de campo cercano (NFC):	Nee
Tipo de fuente de energía:	AC, Battery
Tarjetas de memoria compatibles:	Niet ondersteund
Tarjeta de garantía:	Ja
Incluye adaptador de CA:	Ja
Energía promedio:	- W
Control del volumen:	Digitaal
Radio FM:	Ja
Conexión para adaptador de red:	Ja
Duración de la batería/duración de la batería:	8 uur
Color de retroiluminación:	Wit
Función de reloj:	Ja
Canales de salida de audio:	2.0 kanalen
Salida de vídeo compuesto:	1
Entrada auxiliar:	Ja
radio Internet:	Nee
Bandas de frecuencia soportadas:	FM, PLL
Número de canales preestablecidos:	10
subwoofer suministrado:	Nee
Compatibilidad con acoplamiento de Apple:	iPhone, iPod
Cargador incorporado:	Ja
Conector relámpago:	Nee
Conector de acoplamiento Apple Lightning:	Nee
Conector de acoplamiento Apple de 30 pines:	Ja
Wifi.:	Nee
Baterias-incluidas:	Nee
Pantalla-retroiluminada:	Ja