Lanzar VCT2020 Manual de Usario

Lanzar receptor VCT2020

Lee a continuación 📖 el manual en español para Lanzar VCT2020 (14 páginas) en la categoría receptor. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/14
36Watts 2 Channel High Power MOSFET Amplifier
with Protection LED Indicator
www.Lanzar.com
2
You have purchased a quality product designed and engineered to give you many years of uncompromised
musical service. are designed with the lates technology available, which providesLanzar Vector ampliers
headroom for even the most demanding peaks and dynamic ranges found on modern CD's and recordings.
TABLE OF CONTENTS
Features and Specications
Electrical Connections
Stereo/Mono Input Connections
System Wiring Speaker Connections
Mounting and Installation
Protection Circuitry and Troubleshooting
Precautions
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
AND KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
3
6
6
8
9
11
12
www.Lanzar.com
3
Features and Specications
Crossover Mode Selector: When used with neutral, full range system, set this switch to " ". lf you wish to use the FULL
internal crossover to power a driver or specic frequency range, use the " " or " ' for the "LPF HPF L0WPASS HIGH-" or "
PASS" settings.
Input Level Controls: Enables the matching of input levels to the output levels from head unit (or other signal source).
The input sensitivity of adjustment ranges from 6V to 200mV.
Crossover Frequency Control: When crossover mode selector is in HIGHPASS mode, this cantrol sets the lower
frequency limit for audio program sent to the speakers. When crossover mode selector is in LOWPASS mode, this
control sets the upper frequency limit for audio program sent to the speakers. The crossover is continously variable
adjustment from 40 to 250Hz.
Bass Boost Selector: This selector switch permits the bass level an increase of 18dB.
Low Level Input: This amp features RCA type jacks for high impedance input. Use these with car stereo input which
uses RCA type connector cables.
High Level Input: If your car stereo jacks are not RCA type output, use the high-low level input adaptor to connect the
speaker output leads of car stereo and the RCA input jacks of amp.
AUX Line Outputs: This amp features RCA jacks for AUX line outputs. Use these for unlimited system expansion to the
next amplier.

Especificaciones del producto

Marca: Lanzar
Categoría: receptor
Modelo: VCT2020

¿Necesitas ayuda?

Si necesitas ayuda con Lanzar VCT2020 haz una pregunta a continuación y otros usuarios te responderán




receptor Lanzar Manuales

receptor Manuales

Últimos receptor Manuales