LC-Power LC-DOCK-U3-III Manual de Usario

LC-Power Base/estación de acoplamiento LC-DOCK-U3-III

Lee a continuación 📖 el manual en español para LC-Power LC-DOCK-U3-III (4 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Installation guide
LC-DOCK-U3-III - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Included in delivery
● USB 3.0 dual bay docking station
● USB 3.0 cable
● Power adapter
● Installation guide
3. Information – please read carefully before using the product
We strongly advise that you make a backup of your original data before commencing the cloning process
to avoid any data loss in case of a power failure during the cloning process. LC-Power cannot accept the
responsibility for the loss of data or the misuse of the device. Please also check the content of the
package before commencing with the use of the device.
Minimum system requirements
- Intel Pentium II 50MHz compatible or Mac G3 processor or higher
- Microsoft Windows 2000/XP/Vista/7/8/10, Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3 or higher
- Computer supporting USB 3.0
Page 1
Product overview
1. Hardware clone button
3. HDD B bay (Target drive bay)
5. Cloning status LEDs
7. Power socket (input DC 12V/2,5A)
2. Main features
Supports 2,5” & 3,5” SATA HDDs/SSDs
2,5” up to 6TB, 3,5” up to 16TB
Supports hardware cloning
USB 3.0 output interface
Easy installation, plug & play and
hot- swappable
Including LED indicator for working status
2. HDD A bay (Source drive bay)
4. HDD A & B LEDs
6. USB 3.0 port
8. Power switch
Installation guide
LC-DOCK-U3-III - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
4. Formatting a hard disk drive
If you are using new/unformatted hard disk drives, you will first need to format and partition the drives
before your operating system will recognize them. Please refer to the documentation included with your
hard disk drive and/or operating system for more information about correctly formatting a hard drive.
5. Docking station operation
The dual bay docking station primarily functions as a 2-bay docking station that allows you to easily
connect up to two hard disk drives to your computer through a single USB 3.0 connection.
1. Before your power on and use the docking station, please insert your SATA hard disk drive(s) into the
HDD A bay and/or HDD B bay. Be sure that the hard disk drives’ SATA connectors align with the SATA
connectors inside the HDD bays.
2. Use the provided USB 3.0 cable to connect the docking station with a USB port on your computer.
3. Press the power button located on the rear side of the docking station. The LED indicator will light up
and the hard disk drives will be powered up.
4. Your computer will automatically detect the newly connected device and drives. It may need one to
two minutes to install the necessary drivers. The docking station uses drivers that are already built
into your operating system. Additional drivers are not required.
5. Once the computer has recognized the drives, they will show up under “Computer” (Windows) or on
your desktop (Mac OS X).
No
d
a
ta!
6. Hardware clone function (hard disk drive duplication)
To successfully use the clone function, the capacity of the target hard disk drive must be equal to or larger
than the capacity of the source hard disk drive. Please note that data cannot be cloned to a hard disk
drive with a smaller capacity than the original source hard disk drive.
Hardware clone mode
Please use the one button cloning feature (from source hard disk drive to target hard disk drive) without
connecting the docking station to a computer.
Page 2
Installation guide
LC-DOCK-U3-III - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Importan
t
no
t
e
:
1. Before cloning a hard disk drive, please d the USB 3.0
cabl
e
from the docking station. If the mentioned cable is connected during the cloning process, i
d
r
i
v
e
s.
2. Please make sure you put the correct hard disk drive into the correct HDD bay before cloning.
Ot
3.
The capacity of the target hard disk drive (must be put in the target HDD bay) must be equal or
larger than the capacity of the source hard disk drive.
Please follow the steps below to enable the hardware clone process:
1. Install two hard disk drives into the dock. Make sure the correct drives are properly installed to source
bay (HDD A) and target bay (HDD B).
2. Remove the USB cable from the docking station, connect the power adapter and press the power
button to power on the docking station.
3. Press and hold the button for to start the duplication. The percentage LED CLONE 3 seconds
indicators located next to the “Clone” button will begin to blink. If you do not hold the clone button for
3 seconds, you need to start the process again.
4. As the duplication process progresses, the LED indicator will blink regarding the cloning status
(25%, 50%, 75%, 100%).
5. When the duplication process has completed, the percentage LED indicator will lighted continuously.
Page 3

Especificaciones del producto

Marca: LC-Power
Categoría: Base/estación de acoplamiento
Modelo: LC-DOCK-U3-III

¿Necesitas ayuda?

Si necesitas ayuda con LC-Power LC-DOCK-U3-III haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento LC-Power Manuales

LC-Power

LC-Power LC-DOCK-U3-III Manual de Usario

23 Agosto 2024
LC-Power

LC-Power LC-DOCK-U3-II Manual de Usario

21 Agosto 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024