Legamaster e-Screen FLEX Manual de Usario

Legamaster Monitor e-Screen FLEX

Lee a continuación 📖 el manual en español para Legamaster e-Screen FLEX (25 páginas) en la categoría Monitor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/25

Important: Please read this user manual thoroughly and

completely before operating this monitor.

Full HD LCD touchscreen monitor

USER MANUAL

PROFESSIONAL e-Screen FLEX 55”

ENGLISH

CONTENTS:

1  Important Safety Instructions 3

Safety Precautions 3

Installation (when installing the monitor, please follow the instructions in the manual) 3

Use 4

Cleaning 4

2  Warning For Use 5

Use 5

Exemptions 5

3  Features 5

4  Package 6

Unpacking 6

Contents of accessory bag 6

5  Installation 7

Environmental state 7

Power Input 7

Power Interface 7

Signal Source Input 7

6  Operating the Monitor 8

The side controller of the monitor 8

The Remote Control (RCU) Instructions 8

Change The RCU Battery 9

Display Mode 9

Adjusting the Volume 9

Selecting the input source 9

PIP mode 10

PIP Screen Table 10

OSD (On Screen Display) Menu Function 11

On-Screen Display (OSD) 13

Navigating through the Menu System 14

Display Settings Menu 15

Audio Settings Menu 15

Basic Settings Menu 16

Advanced Settings Menu 16

System Status Menu 17

7  Default Setting 17

8  Touch Operation 18

9  Table supported timings 19

10  Speciﬁ cation 20

Dimensions 21

11  Troubleshooting 22

12  Compliance 22

13  Appendix 23

Moving and Carrying Notice 23

Wall Mount Safety Notes 24

Before using the touch monitor, please read this user manual

thoroughly to help protect against damage to your own and

other people's property and ensure your own and other people

personal safety.

 Be sure to observe the following instructions.

 For your safety, be sure to observe the warnings located in

this manual.

 For installation or adjustment, please follow this

user manual instruction and refer all servicing to qualiﬁ ed

service personnel.

Safety Precautions

If smoke or peculiar smell comes from the monitor, remove the

power plug from the outlet immediately.

Failure to do so may result in ﬁ re or electrical shock.

Contact your dealer for inspection.

If the monitor has been turned on but there isn’t a picture,

remove the power plug from the outlet immediately.

Failure to do so may result in ﬁ re or electrical shock.

Contact your dealer for inspection.

If water is spilled or objects are dropped inside the monitor,

remove the power plug from the outlet immediately.

Failure to do so may result in ﬁ re or electrical shock.

Contact your dealer for inspection.

If the monitor is dropped or the cabinet is damaged, remove the

power plug from the outlet immediately.

Failure to do so may result in ﬁ re or electrical shock.

Contact your dealer for inspection.

To turn off the power of the monitor, press ”” on the main

power switch at side of monitor.

The power standby/on indicator will go off and the monitor

cannot to be turned on/off by using the POWER button on the

remote control. (To turn on/off the monitor by the remote control,

press the main power switch again and light the power standby/

on indicator.)

 When turning off the monitor by pressing the POWER button

on the remote control, the main power of the monitor is not

turned off completely.

 To disconnect the monitor completely from power supply,

remove the power plug from the outlet.

Press “” to turn off

the monitor completely

If the power cord or plug is damaged or becomes hot, turn off the

main power switch of the monitor, make sure the power plug has

cooled down and remove the power plug from the outlet.

If the monitor is still used in this condition, it may cause a

ﬁ re or an electrical shock.

Contact your dealer for replacement.

Installation

(when installing the monitor, please follow the instructions in the

user manual)

Don‘t install in a high-temperature environment.

If the monitor is used in high-temperature or in direct sunlight, it

may cause the case or other parts become distorted or damaged

resulting in overheating or electric shock.

Don‘t install in a high-humidity environment.

This may cause overheating or electric shock.

Don‘t install near any heat sources such as radiators, heat registers,

stoves, or other apparatus that produce heat.

This may cause a ﬁ re or electric shock.

Don‘t overload outlets or cables beyond electrical capacity.

Don‘t use extension cords as it may cause a ﬁ re or electric shock.

Don‘t insert the power plug into an outlet other than 100~240V AC.

This may cause a ﬁ re or electric shock.

 Don’t use a damaged power plug or worn outlet.

Don’t insert the improper power plug it may cause a ﬁ re and

electric shock.

Don‘t place the touch monitor on an unstable shelf or surface.

The monitor may fall causing injury. Please install on a horizontal,

stable, level surface.

Don‘t place objects on the touch monitor.

If the touch monitor is covered or the vents are blocked, the

monitor could overheat and cause a ﬁ re.

If metal or liquid gets into the monitor, it may cause a ﬁ re

or an electrical shock.

Do not put heavy objects on the monitor as it may fall

causing injury.

Please keep a 10 cm minimum distance between the monitor

and the wall for sufﬁ cient ventilation.

Don‘t move the touch monitor when it is connected to the power

cord and AV cables.

When moving the monitor, make sure to remove the power

plug and cables from the outlet or source.

When unpacking or carrying the monitor, at least 2 people

are needed. Make sure the monitor is carried upright.

Transport the monitor upright. Avoid placing the monitor

face up or down.

Handle the monitor gently. Do not drop.

1  Important Safety Instructions

Especificaciones del producto

Marca:	Legamaster
Categoría:	Monitor
Modelo:	e-Screen FLEX
Color del producto:	Zwart
Peso.:	160 g
Altura:	69 mm
Amable:	CCTV-bewakingscamera
Material de la carcasa:	Kunststof
factor vorm:	Dome
Soporte de colocación:	Binnen
Tecnología de conectividad:	Bedraad
red LAN:	Nee
Método de montaje:	Plafond
Resolución Máxima:	- Pixels
Diámetro:	92 mm
Salida de corriente (amperios):	0.3 A
Iluminación mínima:	0.3 Lux
Disco duro incorporado:	Nee
Vision nocturna:	Ja
tipo LED:	IR
Detección de movimiento por vídeo:	Ja
Formato de señal analógica:	NTSC, PAL
Tamaño del sensor óptico:	1/3 "
Tipo de sensor de imagen:	CCD
Zoom óptico:	- x
Interfaz:	BNC
balance de blancos:	Auto, Manual
Salida de vídeo compuesto:	1
Relación señal-ruido:	48 dB
Alimentación a través de Ethernet (PoE):	Nee
Número de líneas de televisión:	650
Alcance de visión nocturna:	15 m
Número de iluminación LED:	24
Wifi.:	Nee
voltaje-de-entrada-de-CA:	12 V
Resoluciones NTSC:	976 x 494 Pixels
Resoluciones PAL:	976 x 582 Pixels