Livoo TES223 Manual de Usario

Lee a continuación 📖 el manual en español para Livoo TES223 (6 páginas) en la categoría tapón para los oídos. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
User manual
WWW.LIVOO.FR
Reference : TES223
Version : 1.4
Language : English
Bluetooth® compatible
wireless earphones
User manual
1
Thank you to have purchased a product brand LIVOO. We take great care in design, ergonomics and
simple
use of our products. We hope that this product will give you complete satisfaction.
This manual is also available on www.livoo.fr
PLEASE READ ALL INSTRUCTIONS CAREFULLY
SAFETY INSTRUCTIONS
Never dissemble the Bluetooth® Earbuds in an attempt to make any repairs as this could result in electrical
shock, burns or product failure.
Use extra caution while children are using the Bluetooth® Earphones.
Earbuds and power case are not waterproof or water resistant;
Use extra caution in high temperatures;
Do NOT the device in water or very humid places, such as swimming pools or bathrooms;
Damage, shock, and/or injury can occur if this warning is not heeded properly;
The Bluetooth® Earphones are not covered under warranty when the product has metal rust, surface
spalling and any other natural oxidation.
PACKAGE CONTENTS
2 Bluetooth® Earphones
1 Charging box
1 USB/Type C cable
Instruction manual
SPECIFICATIONS
Bluetooth® Version: BT5.0 Realtek
Transmission distance : 15m
Charging box capacity : 380mAh
Earphone battery : 40mAh
Input : DC 5V
Play time: 3-4 hours
Standby time: > 200h
Charging Time: 1-2 hours
Supports : IOS, Android
User manual
2
PRODUCT DESCPRITION
USE
Charging the earphones
You need to use the charging box to charge the earphones.
Place each earphone into its slot.
If the box is charged, the earphones will immediately start charging, which is indicated by a red LED light on
the actual earphone.
When the earphones are fully charged, red LED light turns off.
When the battery is lower than 10% a low battery alarm will prompt.
If the charging box is not charged, charge the box as per the instructions below.
Charge the charging box
To charge the charging box, connect the small end of the Micro USB charging cable to the Micro USB port,
with the large USB port into computer’s USB port or an AC adaptor (not included).
The blue LEDs on the charging box blink while charging. When the 4 LEDs are on, the case is fully charged
Pairing both earphones to your device
Take the 2 earbuds out of the box, the two earbuds will be turned on and paired automatically.
If earbuds are off, turn on the power buttons of both headsets at the same time for 4 seconds to power on.
Red/blue light fashes.
The pairing time is 10 seconds. If pairing is not made within 5 minutes, the earphones will switch off.
Open the Bluetooth® device, search and select TES223, and complete the pairing of Bluetooth® and phone.
After the pairing is successful, LED is off.
LEFT EARPHONE
RIGHT EARPHONE
Earphone button
Light indicator
MIC
Light indicator
MIC

Especificaciones del producto

Marca: Livoo
Categoría: tapón para los oídos
Modelo: TES223

¿Necesitas ayuda?

Si necesitas ayuda con Livoo TES223 haz una pregunta a continuación y otros usuarios te responderán




tapón para los oídos Livoo Manuales

tapón para los oídos Manuales

Últimos tapón para los oídos Manuales