London Clock NX189 Manual de Usario

Lee a continuación 📖 el manual en español para London Clock NX189 (5 páginas) en la categoría radio reloj. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
Thank you for your purchase of this radio controlled alarm clock. Please note that this clock may take up to 24
hours to receive a signal. Please read these instructions carefully and keep the manual for future reference.
INSTALLATION
1. Place your clock face down on a flat and soft surface.
2. Remove the battery cover at the back of the clock.
3. Insert 2 x new AAA batteries into the battery compartment by observing the - correct “+” and “ “ polarity.
4. Replace the battery cover.
FUNCTIONS
RADIO CONTROL FUNCTION
Your new clock is designed to set the time automatically in the United Kingdom only, via a transmitted radio
signal.
As with all wireless devices, the ability to receive the signal may be affected by, but not limited to, the following
circumstances:
Long transmitting distance
Nearby mountains and valleys
Among tall buildings
Near railways, high voltage cables etc
Near motorways, airports etc
Near construction site
Inside concrete buildings
Near electrical appliances
Near computers and TVs
Inside moving vehicles
Near metallic structures
Place your clock at a location with optimal signal, ie close to a window and away from metal surfaces or
electrical appliances. If the clock does not pick up signal within 24 hours, try the clock in a different location.
AUTOMATIC TIME SETTING
1. Once you have inserted the batteries, the alarm clock will beep and will show default settings (12:00 as
the time and 1/1 as the date and month). The radio control icon ( will begin to flash, which indicates )
that the clock is receiving signal.
2. Please see the below indications for help with understanding if the time has been set successfully.
If there is a weak or no signal - the icon will flash
If the clock is receiving a strong signal the icon will flash
If the clock has successful reception - the icon will become static
If the clock has failed reception the icon will disappear
3. Your clock will start automatic reception everyday at 1:00, 2:00 and 3:00. If it fails to receive the time
signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it fails again, it
will start automatic reception at 1:00 again the next day.
MANUAL RECEPTION: Press and hold the button on the back of the clock for 3 seconds to start manual C/F/
reception. To stop manual reception, press and hold the button on the back of the clock for 3 seconds. C/F/
Please note that when your clock is receiving the radio controlled signal, all buttons expect the “Snooze.Light”
button on the top of the clock will not function.
TO SET THE TIME, 12/24HR TIME AND CALENDAR
Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to
the normal time display mode.
1. The setting will occur in the following sequence: Hour→ Minute→ 12HR/24HR→ Year→ Month→ Date→
Snooze Duration.
2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit begins to
flash. Use the buttons on the back of the clock to select the correct hour. (Press and hold or C/F/
the buttons to accelerate setting). The hour only needs to be set if no radio control signal or C/F/
can be received. Press the SET” button on the back of the clock to confirm.
3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
correct minute. (Press and hold the buttons to accelerate setting). The minute only needs or C/F/
to be set if no radio control signal can be received. Press the “SET” button on the back of the clock to
confirm.
4. The time digits will now flash 12Hr. Use the or C/F/ buttons on the back of the clock to select 12Hr
or 24Hr. If you select 12Hr format, “P” will appear to the left of the time digits to indicate the afternoon
time. There is no AM icon to indicate the time before noon. Once you have chosen 12Hr or 24Hr, press
the “SET” button on the back of the clock to confirm.
5. The year will now flash. Use the or C/F/ buttons on the back of the clock to select the correct
year. (Press and hold the buttons to accelerate setting). or C/F/ Press the “SET” button on the
back of the clock to confirm.
6. The month digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
correct month. (Press and hold the buttons to accelerate setting). or C/F/ Press the SET” button
on the back of the clock to confirm.
7. The date digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
correct date. (Press and hold the buttons to accelerate setting). The day will change or C/F/
automatically according to the date. Press the “SET” button on the back of the clock to confirm.
8. The LCD display will now change to “05”. Use the or C/F/ buttons on the back of the clock to
select the desired snooze duration please note snooze duration can be selected from 5 to 60 minutes.
(Press and hold the or C/F/ buttons to accelerate setting). Press the “SET” button on the back of
the clock to confirm and return to normal time display.
TO SET ALARM 1
Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to
the normal time display mode.
1. With the clock in normal time display, press the “SET” button on the back of the clock once, 6:00 (AM)
and will appear.
2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit flashes. U se
the buttons on the back of the clock to select the desired hour for Alarm 1. (Press and or C/F/
hold the he back of the clock to or C/F/ buttons to accelerate setting). Press the “SET” button on t
confirm.
3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
desired minute for Alarm 1. (Press and hold the buttons to accelerate setting). Press the or C/F/
“SET” button on the back of the clock to confirm and return to normal time display.
TO SET ALARM 2
Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to
the normal time display mode.
1. With the clock in normal time display, press the “SET” button on the back of the clock twice, 6:00 (AM)
and will appear.
2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit flashes. Use
the buttons on the back of the clock to select the desired hour for Alarm 2. (Press and or C/F/
hold the buttons to he back of the clock to or C/F/ accelerate setting). Press the “SET” button on t
confirm.
3. The minute digit will now flash. U the se or C/F/ buttons on the back of the clock to select the
desired minute for Alarm 2. (Press and hold the buttons to accelerate setting). Press the or C/F/
“SET” button on the back of the clock to confirm and return to normal time display.
Please note the duration of the alarm is 2 minutes.
TO TURN ALARM 1 AND 2 ON AND OFF
With the clock in normal time display:
1. Press the “ALM 1.2” button on the back of the clock once to activate Alarm 1. will appear to
indicate Alarm 1 has been activated.
2. Press the “ALM 1.2” button on the back of the clock twice to activate Alarm 2. will appear to
indicate Alarm 2 has been activated.
3. Press the “ALM 1.2” button on the back of the clock three times to activate both Alarm 1 and 2. Both
and will appear to indicate Alarm 1 and Alarm 2 have been activated.
4. Press the “ALM 1.2” button on the back of the clock four times to deactivate both alarms. Both and
will disappear to indicate that both alarms have been deactivated.

Especificaciones del producto

Marca: London Clock
Categoría: radio reloj
Modelo: NX189

¿Necesitas ayuda?

Si necesitas ayuda con London Clock NX189 haz una pregunta a continuación y otros usuarios te responderán




radio reloj London Clock Manuales

radio reloj Manuales

Últimos radio reloj Manuales