Magnavox 19ME360B Manual de Usario
Magnavox
televisor LED
19ME360B
Lee a continuación 📖 el manual en español para Magnavox 19ME360B (37 páginas) en la categoría televisor LED. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/37
Owner’s Manual
Manuel du Propriétaire
Manual del Propietario
English Français Español
1-866-341-3738
1-866-341-3738
1-866-341-3738
MODEL NUMBER SERIAL NUMBER
22ME360B
19ME360B
LCD TV
2
EN
Return your Product Registration Card or register online at
www.magnavox.com/support today to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable beneÀts listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or register online at www.magnavox.com/support to ensure:
*Proof of Purchase * Product Safety
Notification
*Additional Benefits
Returning the enclosed card
guarantees that your date of purchase
will be on Àle, so no additional
paperwork will be required from you
to obtain warranty service.
By registering your product, you’ll
receive notiÀ cation directly from
the manufacturer - in the rare
case of a product recall or safety
defect.
Registering your product
guarantees that you’ll receive all
of the privileges to which you’re
entitled, including special
money-saving offers.
Congratulations on your purchase,
and welcome to the “family!”
Dear MAGNAVOX product owner:
Thank you for your conÀ dence in
MAGNAVOX. You’ve selected one of the
best-built, best-backed products available today.
We’ll do everything in our power to keep you happy
with your purchase for many years to come.
As a member of the MAGNAVOX “family,” you’re
entitled to protection by one of the most
comprehensive warranties and outstanding service
networks in the industry. What’s more, your
purchase guarantees you’ll receive all the
information and special offers for which you qualify,
plus easy access to accessories from our convenient
home shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome - and
thanks for investing in a MAGNAVOX product.
P.S. To get the most from your MAGNAVOX
purchase, be sure to complete and return your
Product Registration Card at once or register
online at:
www.magnavox.com/support
Know these safety symbols
This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the safety
of everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to
features for which you should read the
enclosed literature closely to prevent operating
and maintenance problems.
WARNING : To reduce the risk of À re or
electric shock, this apparatus should not be
exposed to rain or moisture and objects À lled
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION : To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
ATTENTION : Pour éviter les choc électriques,
introduire la lame la plus large de la À che dans
la borne correspondante de la prise et pousser
jusqu’au fond.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
Visit our World Wide Web Site at www.magnavox.com/support
3
EN
English
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliÀers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not Àt into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories speciÀed by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
speciÀed by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when un-
used for long periods of time.
14. Refer all servicing to qualiÀed service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into apparatus, the appara-
tus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Damage Requiring Service - The appliance should be
serviced by qualiÀed service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure damaged.
16. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
17. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
18. Power Lines - An outdoor antenna should be located
away from power lines.
19. Outdoor Antenna Grounding - If an outside antenna
is connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
20. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
21. Battery Usage CAUTION - To prevent battery
leakage that may result in bodily injury, property damage,
or damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
Note to the CATV system installer : This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular, speciÀes that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
Example of Antenna Grounding as
per NEC - National Electric Code
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ANTENNA LEAD IN WIRE
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMP
4
EN
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
Trade Name: MAGNAVOX Responsible Party: FUNAI CORPORATION, Inc.
Model: 22ME360B / 19ME360B Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
Telephone Number:
1-866-341-3738
This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7
CAUTION :
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING :
Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10 cm) or more around this apparatus.
WARNING:
To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
NOTE ABOUT RECYCLING
• This unit’s packaging materials are recyclable and
can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
TO AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an
AC outlet. Grasp it by the plug.
• Do not put your À ngers or objects into the unit.
LOCATION AND HANDLING
• Do not install the unit in direct sunlight, near strong magnetic
À elds, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place
anything directly on top or bottom of the unit. Depending on
your external devices, noise or disturbance of the picture and / or
sound may be generated if the unit is placed too close to them.
In this case, please ensure enough space between the external
devices and the unit.
• Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
• Be sure to unplug the AC power cord from the AC outlet before
carrying the unit.
Trademark Information
HDMI, the HDMI Logo, and High-DeÀ nition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
SRS TruSurround HD™ creates an immersive,
feature-rich surround sound experience from
two speakers, complete with rich bass, high
frequency detail and clear dialog.
is a trademark of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.
ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the
U.S. Department of Energy helping us all save
money and protect the environment through
energy efÀ cient products and practices.
Consumer Notice:
This TV has been set to maximize energy efÀ ciency while delivering the
best possible picture using the factory installed home mode settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR® qualiÀ ed limits.
• The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
English
5
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
INTRODUCTION
Contents
Important Safety Instructions 3
Trademark Information 4
INTRODUCTION
Features 5
Attaching the Base 6
Fixing the Unit on Your Furniture 6
Tilting the unit 6
Supplied Accessories 6
Symbols Used in this Manual 6
Control Panel 7
Terminals 8
Remote Control Function 9
Installing the Batteries 9
PREPARATION
Antenna Connection 10
Connection to Cable Receiver or Satellite Box 10
External Device Connection 11
Plug In the AC Power Cord 14
Initial Setup 15
WATCHING TV
Sleep Timer 16
Switching Each Input Mode 16
Freeze Mode 16
Channel Selection 16
TV Screen Display Mode 17
Sound Functions 17
TV Screen Information 18
Reducing the Brightness 18
Fun-Link Options 18
OPTIONAL SETTING
Main Menu 19
Autoprogram 19
Channel List 20
Add Channels 20
Antenna ConÀ rmation 21
Language Selection 21
Picture Adjustment 22
Sound Adjustment 2 2
Closed Caption 24
Child Lock 27
PC Settings 29
Fun-Link 30
Energy Saving Mode 31
Location 31
Current Software Info 31
TROUBLESHOOTING
Troubleshooting Guide 32
FAQ 34
INFORMATION
Glossary 35
Maintenance 3 5
General SpeciÀ cations 36
Electrical SpeciÀ cation 3 6
Other SpeciÀ cations 36
Limited Warranty 37
Features
• DTV / TV / CATV
You can use your remote control to select channels which
are broadcast in digital format and conventional analog
format. Also, cable subscribers can access their cable TV
channels.
• Information Display (ATSC only)
You can display the title, contents and other information of
the current DTV program on the TV screen.
• Autoprogram
This unit automatically scans and memorizes channels
available in your area, eliminating difficult setup procedures.
• Child Lock
This feature allows you to block children’s access to
inappropriate programs.
• Closed Caption Decoder
Built-in closed caption decoder displays text for closed
caption supported programs.
• MTS / SAP Tuner
Audio can be selected from the remote control.
• Auto Stand-by
If there is no input signal and no operation for 15 minutes,
the unit will go to the stand-by mode automatically.
• Sleep Timer
You can set the unit to go to the stand-by mode after a
specific amount of time.
• Choices for On-screen Language
Select your on-screen language:
English, Spanish or French.
• Stereo Sound Function
• PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune
directly to any channel using the number and decimal point
"•" buttons on the remote control.
• Various Adjustment for Picture and Sound
Customizes image quality suitable for your room and sets
your sound preference.
• Fun-Link via HDMI Link
(HDMI Cable not Included)
Fun-Link allows your other HDMI link devices (such as
Magnavox DVD) to be controlled by the HDMI cable
connected to your TV.
• HDMI Input
• Component Video Input
• PC Input
• AV Input
• Digital Audio Output
• Headphone Audio Output
© 2010 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied,
transmitted, disseminated, transcribed, downloaded or stored in any storage
medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this
manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai
reserves the right to change the content herein without the obligation to
notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co.,
Ltd. and may not be used in any way without the express written consent
of Funai. All other trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this manual should be
construed as granting, by implication or otherwise, any license or right to
use any of the trademarks displayed herein. Misuse of any trademarks or
any other content in this manual is strictly prohibited. Funai shall aggressively
enforce its intellectual property rights to the fullest extent of the law.
6
EN
Tilting the unit
You can adjust the base to change the angle of the unit
(-2° to 10°).
-2°10°
Supplied Accessories
Owner’s Manual
(1EMN26681)
Quick Start Guide
(1EMN
26682)
Remote Control
(NF804 UD)
Registration card
(1EMN27079 )
AC power cord
(WAV0162LW001) or
(WAV0162LTE03) or
(WAV152ZHN001)
Batteries
(AAA, 1.5V x 2)
AAA
AAA
Screw kit
for attaching the base
(1ESA
25348)
• If you need to replace these accessories, please refer to
the part No. with the illustrations and call our toll free
customer support line found on the cover of this manual.
Note
• If you lose the screws, please purchase M 4×10 Phillips head screws at your
local store.
Symbols Used in this Manual
The following is the description for the symbols used in
this manual. Description refers to:
ATS C : Digital TV operation
NTSC : Analog / Cable TV operation
• If neither symbol appears, the operation is applicable to both.
Attaching the Base
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction.
1 Spread a thick and soft
cloth over a table as
shown.
Place the main unit face
down onto it. Make sure
not to damage the screen.
2 Insert the metal neck
under the bottom of the
main unit into base holes.
(shown by arrow), then
move the base until it
stops and the 2 mounting
holes are aligned.
3 Drive Phillips head screws
into the 2 threaded holes
at the rear of this unit until
they are tight.
To remove the base from this unit
• Unscrew the Phillips head screws on step 3.
After the screws are removed, move the base in the opposite direction on
step 2 to pull the base from the unit. Be careful not to drop the base when
you remove it.
Note
• When attaching the base, ensure that all screws are tightly fastened. If the
base is not properly attached, it could cause the unit to fall, resulting in
injuries as well as damage to the unit.
• Make sure to use a table which can support the weight of this unit and is
larger than this unit.
• Make sure the table is in a stable location.
Fixing the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screw (not
supplied) in the hole at the back of the base as shown.
• Recommended screw dimension : 5.1 x 20 mm
screw hole
rear of this unit
Note
• When you remove this unit make sure to unscrew the wood screw from
your Wood Stand, Furniture and other wood item.
English
7
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Control Panel
3
4
5
1
2
6
7
1 Illuminance sensor window
Alters the brightness of the TV screen automatically by
detecting your room lighting level. Do not block anything
in front of its window to work properly.
2 Power on indicator
Lights up green when power is on.
3 Infrared sensor window
Receives infrared rays transmitted from the remote
control.
4 VOLUME +/ñ ➠ p. 17
Press to adjust the volume or move right (+
) / left (–
)
through the main menu items.
5 MENU ➠ p. 19
6 CHANNEL +/ñ ➠ p. 16
Press to select channels or move up (+ ) / down (– )
through the main menu items.
7 POWER ➠ p. 15
Press to turn the unit on and go to the stand-by mode.
To completely turn off the unit, you must unplug the AC
power cord.
8
EN
Terminals
HDMI 2
HDMI 2
14
16
15
17
13
12 9
11
10
18
*
8
Side Panel
8 HDMI 2 Input jack ➠ p. 10, 11
9 Composite Video / Audio (L/R)
Input jacks for VIDEO ➠ p. 12
10 Headphone Audio Output jack
Headphone connection for personal listening.
Rear Panel
11 Antenna Input jack ➠ p. 10
12 AC power cord Inlet ➠ p. 14
13 PC (VGA) Input jack ➠ p. 13
14 HDMI 1 Input jack ➠ p. 10, 11
15 Component Video and Audio (L/R) Input jacks
➠ p. 10, 12
16 Digital Audio Output jack ➠ p. 13
17 Audio Input jack for PC connection
➠ p. 13
Mini-plug audio cable connection from your PC
18 Audio (L/R) Input jacks for HDMI 1
➠ p. 11
Audio cable connection from your DVI device.
(For HDMI 1 Input jack only)
Note for service terminal
* service terminal (service use only)
• Use this terminal only when a software update is necessary.
• User should not connect any devices to the service terminal such as digital
camera, keyboard, mouse, etc. (because these will not work).
• The software update is, in most cases, handled by an authorized service
person or in some circumstances the user may be asked to do the software
update themselves.
English
9
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Remote Control Function
1
6
3
413
14
11
19
10
2
5
7
8
12
16
20
9
17
18
15
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control is set
to our brand. Refer to the manual accompanying your remote control for
more details.
• We do not guarantee 100% interoperability with all universal remote
controls.
Note
• Buttons in gray background ( ) are not available unless you are
connected to devices that are compatible with Fun-Link function.
• We do not guarantee 100% interoperability with other brands of HDMI link
compliant devices.
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old
batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
1 (power) ➠ p. 15
Press to turn the unit on and go to the stand-by mode.
To completely turn off the unit, you must unplug the AC
power cord.
2 SAP ➠ p. 17
3 SOURCE ➠ p. 16
4 FREEZE ➠ p. 16
Press to freeze screen image.
5 OK ➠ p. 15
6 ɼ/ɾ/ɿ/ɽ(cursor) ➠ p. 15
7 BACK ➠ p. 18
Press to return to the previous menu operation.
8 VOL +/ñ ➠ p. 17
9 PREV CH ➠ p. 16
Press to return to previously viewed channel.
10 SLEEP ➠ p. 16
11 FORMAT ➠ p. 17
Press to select aspect ratio available for the TV screen.
12 RED / GREEN / BLUE / YELLOW ➠ p. 30
Functionally useful for Fun-Link.
13 MENU ➠ p. 19
14 INFO ➠ p. 18
15 REV E / FWD D ➠ p. 30
Press to search backward or forward through the disc.
PLAY B ➠ p. 30
Press to begin the disc playback.
SKIP H / SKIP G ➠ p. 30
Press to skip backward or forward chapters, titles or
tracks of the disc.
PAUSE F ➠ p. 30
Press to pause the disc playback.
STOP C ➠ p. 30
Press to stop the disc playback.
16 MUTE ➠ p. 17
17 CH +/ñ ➠ p. 16
18 ECO ➠ p. 18
Press to reduce the brightness.
19 Number buttons ➠ p. 16
• (dot)
Press to shift the subchannel from the main channel.
20 FUN-LINK OPTIONS ➠ p. 18, 30
Press to call up various menu from your Fun-link device
connected through an HDMI cable.
Installing the Batteries
Install the batteries (AAA, 1.5V x 2) matching the polarity
indicated inside battery compartment of the remote control.
AAAAAA
AAAAAA
10
EN
PREPARATION
No supplied cables are used with these connections:
Please purchase the necessary cables at your local store.
Use an HDMI cable with the HDMI logo (a certiÀ ed HDMI cable).
High Speed HDMI cable (also known as HDMI category 2
cable) is recommended for the better compatibility.
Before you connect:
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
Antenna Connection
Connect the RF coaxial cable on your home outlet to the
antenna input jack of this unit.
e.g.)
VHF / UHF
analog or
DTV antenna
cable TV signal
rear of this unit
or RF coaxial cable
Once connections are completed, turn on the unit and begin initial
setup. Channel scanning is necessary for the unit to memorize all
available channels in your area. [Initial Setup] ➠ p. 15
Note
• If you have any question about the DTV’s antenna,
visit www.antennaweb.org for further information.
• Depending on your antenna system, you may need different types of
combiners (mixers) or separators (splitters). Contact your local electronics
store for these items.
• For your safety and to avoid damage to this unit, please unplug the RF
coaxial cable from the antenna input jack before moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV
reception. Outdoor or attic antennas will be more effective than a set top
or inside antenna.
• To switch your reception source easily between antenna and cable, install an
antenna selector.
• If you are not receiving a signal from your cable service, contact the Cable
provider.
Connection to Cable Receiver or
Satellite Box
Use an HDMI or component video cables to connect the
HDMI or the Component Video Input jacks of the unit to
the HDMI or the component video output jacks of the cable
receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside
the Component Video connector.
HDMI 2
HDMI 2
STEREO
PCM
HDMI OUT
ANT IN
COMPONENT VIDEO OUT
Pr/CrPb/CbY
AUDIO OUT
RL
e.g.)
satellite dish
cable receiver /
satellite box
cable TV signal
including PPV
component video cables
component video cables
(red/blue/green)
(red/blue/green)
and audio cables
and audio cables
RF coaxial cable
(blue)
(blue)
(green)
(green)
(red)
(red)
(red)
(red)
(blue)
(blue)
or
or
or
HDMI cable
side or rear of
this unit
(green)
(green)
You can also connect this unit to the cable receiver or satellite box
other than the HDMI or the component video output jacks because
they might have different output jacks.
Required cables and connecting methods of the cable receiver /
satellite box, or the availability channel for the clear QAM may differ
depending on the cable / satellite provider. For more information,
please contact your cable / satellite provider.
English
11
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
External Device Connection
HDMI Connection
HDMI connection offers the highest picture quality.
HDMI (High-DeÀ nition Multimedia Interface) transports high deÀ nition
video and multi-channel digital audio through a single cable.
BD/DVD recorder
with the HDMI output jack
e.g.)
HDMI 2
HDMI 2
HDMI OUT
CHAPTER 15
REPEAT A-B
TITLE 5
HDMI cable
side or rear of this unit
or
HDMI-DVI Connection
Use an HDMI-DVI conversion cable to connect the unit to
external video devices equipped with DVI output jack.
STEREO
PCM
AUDIO OUT
RL
DVI OUT
HDMI-DVI
HDMI-DVI
conversion cable
conversion cable
cable receiver or satellite box
with the DVI output jack
audio cables
rear of this unit
e.g.)
Note
For HDMI connection
• The unit accepts 480i, 480p, 720p 1080i of video signals, and 32kHz,
44.1kHz and 48kHz of audio signals.
• This unit accepts only 2 channel audio signal (LPCM).
• You need to select "PCM" for the digital audio of the device you connected
or check the HDMI audio setting. There may be no audio output if you
select "Bitstream", etc.
• This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
• The unit accepts 480i, 480p, 720p 1080i video signals.
• HDMI-DVI connection requires separate audio connections as well and the
audio signals are converted from digital to analog.
• DVI does not display 480i image which is not in compliance with
EIA/CEA-861/861B.
12
EN
Component Video Connection
Component Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside
the Component Video connector.
(blue)
(blue)
(green)
(green)
(red)
(red)
CHAPTER 15
REPEAT A-B
TITLE 5
COMPONENT VIDEO OUT
Pr/CrPb/CbY
AUDIO OUT
RL
(red)
(red)
(blue)
(blue)
(green)
(green)
e.g.)
BD/DVD recorder with
the component video output jack
rear of this unit
audio cables
component video
component video
cables
cables
(red/blue/green)
(red/blue/green)
(blue)
(blue)
(green)
(green)
(red)
(red)
Note
• The unit accepts 480i / 480p / 720p and 1080i of video signals for this
connection.
Composite Video Connection
Composite Video connection offers standard picture quality
for video devices connected to the unit. If you connect to
the unit’s Composite Video Input jack, connect audio cables
to the Audio L/R Input jacks right beside the Composite
Video connector. When the audio jack of the video device is
monaural, connect an audio cable to the Audio L Input jack.
e.g.)
STEREO STAND-BY
AUDIO OUT
RL
VIDEO
OUT
audio cables
video cable
camcorder video game
VCR
side of this unit
English
13
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Digital Audio Output Connection
(for digital broadcasting only)
If you connect this unit to an external digital audio device, you
can enjoy multi-channel audio like 5.1ch digital broadcasting
sound.
Use a digital audio coaxial cable to connect the unit to external
digital audio devices.
e.g.)
DIGITAL AUDIO
COAXIAL IN
Dolby Digital
decoder
digital audio coaxial cable
digital audio coaxial cable
rear of this unit
PC Connection
This unit is equipped with a PC input jack. If you connect this
unit to your PC, you can use this unit as a PC monitor.
Use an VGA cable for this connection and it requires stereo
mini plug audio cable as well.
e.g.)
rear of this unit
stereo mini plug
cables
VGA cable
VGA cable
VGA cable should be
with ferrite core.
personal computer
The following video signals can be displayed:
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1, 024 x 768
WXGA 1, 280 x 768
1, 360 x 768
Other formats or non-standard signals will not be displayed
correctly.
Note
• Please purchase the VGA cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
14
EN
Use the following accessary with this connection:
• AC power cord x 1
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are completed.
AC power cord
AC outlet
rear of this unit
Caution:
• Do not connect the AC power cord to a power supply outside the
indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may
result in À re or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be performed
for a few seconds. This is not a malfunction.
English
15
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
Initial Setup
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and autoprogram, which automatically scans and memorizes
viewable channels.
Before you begin:
Make sure the unit is connected to antenna or cable.
1 After making all the necessary connections,
press to turn on the unit.
• It may take a few moments to turn on the unit for the
first time.
• [Initial Setup] menu appears automatically after the
unit is turned on.
2 Use ɼ/ɾ to select the on-screen language from the
choices (English / Español / Français) on the right side of the
TV screen.
3 Use ɼ/ɾ to select [Antenna] for TV channels or [Cable]
for CATV channels, then press OK.
Initial Setup
Make sure the antenna is connected to ''ANT. IN'' jack.
Select your signal source. Antenna
Cable
ANT.IN
Antenna
Cable Or
Skip
Select OK OK
BACK
Back
MENU
Skip
• [Autoprogram] will begin.
Initial Setup
Please wait while the system is scanning for channels. Auto programming
may take more than 20 minutes to complete.
0%
Digital channels 0 ch
Analog channels 0 ch
MENU
Skip
4 Use ɿ/ɽ to select the desired location setting, then
press OK.
Initial Setup
Select “Retail” or “Home” for your location.
Retail Home
Select OK OK
• Select [Retail] store, the unit will be set up with
predefined setting for retail displays. In this setting, the
power consumption may possibly exceed the limited
requirement of the ENERGY STAR® qualification.
• Select [Home], the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality according
to your preference.
• When the initial setup is completed, the lowest
memorized channel with the confirmation message of
the location setting will be displayed on the TV screen.
Note
• If you are not receiving a signal from your cable service, contact the Cable
provider.
• If you press or MENU during autoprogram, this setting will be canceled.
• The initial autoprogram function can be executed for either [Antenna] or
[Cable] only once. When you change the connection (Antenna / Cable),
set [Autoprogram] again. ➠ p. 19
• If there is no signal input from the antenna terminal and no operation for
several seconds after you turn on the unit, [Helpful Hints] appears. Follow
the instructions listed on the TV screen.
Initial Setup
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the "ANT. IN" jack on the back
of the TV, the channel installation process searches this connection. If
you are using a cable or satellite box, please confirm the input which
you have connected the box and press "SOURCE" key on the remote
control to select the appropriate source input.
Retry
Later
Select OK OK
MENU
Skip
• You must set [Home] in step 4. Otherwise, the settings of picture and
sound quality you adjusted will not be memorized after the unit goes to the
stand-by mode.
After an initial setup is completed...
• If you want to scan the channels automatically again.
[Autoprogram] ➠ p. 19
• You can add the desired cable and analog channels
unmemorized by autoprogram.
[Add Channels] ➠ p. 20
• If you want to change to another language.
[Language Selection] ➠ p. 21
• If you want to change the location setting.
[Location] ➠ p. 31
16
EN
11.1
11.1 Video
HDMI3 HDMI2 HDMI1
Component
PC
WATCHING TV
Sleep Timer can be set the unit to go to the stand-by mode after an incremental
period of time.
Press SLEEP repeatedly to change the amount of time (increases
the time by 30 minutes up to 120 minutes). Sleep 120min.
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until
[Sleep Off] is displayed.
Switching Each Input Mode can easily switch with the remote control
between TV (ATSC or NTSC) and external devices when they are connected to the unit.
Press SOURCE or CH + repeatedly to cycle through the input modes.
Source
TV
Video
Component
HDMI1
HDMI2
PC
• Pressing CH ñ reverses the direction of the input modes.
DTV/TV channel
e.g.)
Freeze Mode can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
Freeze
• The sound output will not be paused.
• To cancel freeze mode, press any buttons except .
Channel Selection
Select channels by using CH + / ñ or the Number buttons.
• To select the memorized channels,
use CH + / ñ or the Number buttons.
• To select the non-memorized channels,
use the Number buttons.
To use the Number buttons
ATS C
-When selecting digital channel 11.1
Be sure to press . before entering the subchannel number.
NTSC
-When selecting cable or analog channel 11
Press PREV CH to return to the previously viewed channel.
Note • [No Signal] will appear on the TV screen after the subchannel broadcast is over.
• [Audio only program] message will appear on the TV screen, when you receive
only sound signal.
English
17
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
salut!
hola!
hi!
TV Screen Display Mode
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
Press FORMAT repeatedly to switch the TV aspect ratio.
For 16:9 video signal
Normal
Wide
4:3 Movie Expand
Zoom
Normal displays a 16:9 picture at its original size.
4:3 displays a 16:9 picture at a 4:3 size; the picture
is shortened horizontally. Sidebars appear on both
edges of the screen.
Movie Expand displays a 16:9 picture that is
vertically stretched to À ll the screen. This only crops
out the top of the picture.
Zoom displays a 16:9 picture at its maximum size
without changing its horizontal and vertical ratio.
Wide displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
For 4:3 video signal
Normal
Wide
16:9 Movie Expand
Zoom
Normal displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9 displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to À ll the screen.
Movie Expand displays a 4:3 picture at a 16:9 size;
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to À ll
the screen. This crops out the top and bottom of the
picture.
Wide displays the picture with its center at the
original size and the edges stretched horizontally to
À ll the screen.
For PC input signal
Normal Dot By DotFull
Normal displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Full displays a picture that is stretched out of
proportion horizontally to À ll the screen.
Dot By Dot displays a picture in its original size.
Sound Functions
describe how to change the audio or the audio language as well as the volume.
Volume Adjustment
Use VOL + / ñ to adjust the volume.
Volume 30 will be displayed for a few
seconds when adjusting the volume.
Silence Mode
Press MUTE to turn off the sound temporarily.
Mute will be displayed for a few seconds.
• Press MUTE again or VOL + / ñ to recover the
original volume.
Switching Audio Mode
ATS C
Press SAP repeatedly to cycle through the available
audio languages.
• Available languages differ depending on the
broadcast.
•[Other] is displayed when the audio language
cannot be acquired, or the acquired languages are
other than English, Spanish or French.
11.1
English 1/3
NTSC
Press SAP to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
11
SAP / STEREO
e.g.) When all audio are available
SAP / STEREO SAP / MONO SAP / STEREO
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
18
EN
TV Screen Information
You can display the currently selected channel or other
information such as the audio mode on the TV screen.
In the digital mode, the detailed broadcasting information for
the current channel such as program title, program guides are
displayed.
Press INFO.
ATS C
11.1
TV: TV-14
1080i
1080i 16:9
16:9
HD
HD
CC
CC
KABC
KABC
123 4
5
6, 7, 8
9
10
A Day of Memories
A Day of Memories
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were
English 1/2
Rating
NTSC
11
TV-PG DLSV
480i
480i 4:3
4:3
SD
SD
CC
CC
4
5
6, 7, 8
9
10
SAP / STEREO
1 program title
2 program guide
( The program guide added to broadcasting
information is displayed to a maximum of 4 lines.)
3 broadcast station
4 channel number
5 audio language (ATSC) / audio mode (NTSC)
[Switching Audio Mode] ➠ p. 17
6 effective scanning lines and scan mode
7 TV format
8 program aspect ratio
9 CC (not available if closed caption is set to [Off])
10 child lock rating
• To clear the display, press INFO again.
You can also press BACK .
Note
• When the program guide consists of more than 4 lines, use ɼ/ɾ to scroll.
• [No description provided.] is displayed when the program guide is not
provided.
• While the program guide is displayed, the closed caption function is
interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to Video Input jack.
TV-PG DLSV
480i
480i SD
SD
CC
CC
Video
• The information display will automatically disappear in 1 minute.
Reducing the Brightness
Backlight brightness can be reduced which may save on power
consumption more than you just set [On] in [Energy Saving
Mode]. ➠ p. 31
Press ECO once to reduce the brightness.
Press ECO again to increase the brightness.
Note
• Even if this function is in effect, the brightness will be increased when you
change [Energy Saving Mode] on or off due to the energy saving mode has
priority.
• You must set [Home] in [Location]. ➠ p. 31
Otherwise, the settings you adjusted will not be memorized after the unit
goes to the stand-by mode.
Fun-Link Options
If you have our brand products such as BD player or DVD
recorder that are compatible with Fun-Link functions, connect
them to this unit via an HDMI cable so you can simply operate
various items from this unit's remote control.
Before you begin:
You must set [On] in [Device Control] and
[Fun-Link Control]. ➠ p. 30
Otherwise, FUN-LINK OPTIONS does not work even if
you connected our brand devices to this unit.
To enjoy Fun-Link, verified and recommended devices
are as follows;
MAGNAVOX
NB530MGX
NB500MG1F
MBP1100 / F7
SYLVANIA
NB530SLX
NB500SL1
1 Press FUN-LINK OPTIONS to display
[Fun-Link Options] menu.
Fun-Link Options
Device-menu
Device-contents
Device-favorite
Device-menu
This function allows you to control
the menu of your connected Fun-Link
device.
Device-contents This function allows you to control the
top menu of your DVD or Blu-ray discs.
Device-favorite This function allows you to control the
pop-up menu of your Blu-ray discs.
2 Use ɼ/ɾ/ɿ/ɽ / OK on this unit's remote control to
operate the desired functions for your devices.
Note
• Some of Fun-Link functions may not be available depending on your
Fun-Link devices or discs.
• We do not guarantee 100% interoperability with other brands of HDMI link
compliant devices.
English
19
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
OPTIONAL SETTING
Main Menu
This section describes the overview of the main menu
displayed when you press MENU. The main menu consists of
the function setting items below.
Press MENU.
Picture
Sound
Setup
Features
Language
Picture [Picture Adjustment] ➠ p. 22
Sound [Sound Adjustment] ➠ p. 22
Setup [Autoprogram] ➠ p. 19
• You can automatically scan the viewable channels.
[Channel List] ➠ p. 20
• The Channels that were autoprogrammed are in
this Channel list, use CH + / ñ to access them.
[Add Channels] ➠ p. 20
• You can add TV channels that were not found by
the autoprogram scan.
Features [Closed Caption] ➠ p. 24
• You can change the display closed caption format
which displays the dialogue of a TV program or
other text information across the TV screen.
[Child Lock] ➠ p. 27
• You can set viewing limitations.
[PC Settings] ➠ p. 29
• You can adjust the position, stability and clarity of
the PC screen.
[Fun-Link] ➠ p. 30
• You can set Fun-Link options.
[Energy Saving Mode] ➠ p. 31
[Location] ➠ p. 31
• Switch setting from [Retail] to [Home] to allow the
desired [Picture] and [Sound] mode to be kept in
memory.
[Current Software Info] ➠ p. 31
Language [Language Selection] ➠ p. 21
• Change the Main Menu language.
Autoprogram
If you switch wires (e.g. between antenna and CATV) or if you
move the unit to a different area after the initial setting, or if
you restore the DTV channels you deleted, it is recommended
to use Autoprogram to perform a new channel search.
Before you begin:
Make sure the unit is connected to antenna or cable.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Setup], then press OK.
3 Use ɼ/ɾ to select [Autoprogram], then press OK.
4 Use ɼ/ɾ to select an appropriate option, then press OK.
Picture
Sound
Setup
Features
Language
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Select your signal source.
ANT.IN
Antenna
Cable Or
Back
Antenna
Cable
• When connected to VHF / UHF antenna,
select [Antenna].
• When connected to CATV, select [Cable].
• [Autoprogram] will begin.
Please wait while the system is scanning for channels. Auto programming
may take more than 20 minutes to complete.
75%
Digital channels 10 ch
Analog channels 6 ch
MENU
Exit
• When the scanning and memorizing are completed, the
lowest memorized channel will be displayed.
Note
• After setting [Autoprogram], using CH +/ñ on the remote control skips
unavailable programs automatically.
• If you are not receiving a signal from your cable service, contact the Cable
provider.
• If you press or MENU during autoprogram, the setting will be canceled.
• Even if [Autoprogram] is completed, the channel setting will be lost if the
AC power cord is unplugged before the unit goes to the stand-by mode
by pressing .
• The PIN code will be required once you set a PIN code in the [Child Lock].
➠ p. 27
• If you want to change your PIN code, follow the instruction of
[Change PIN]. ➠ p. 28
20
EN
Channel List
The channels selected here can be skipped when selecting the
channels using CH + /
– .
Those channels can still be selected with the Number buttons.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Setup], then press OK.
3 Use ɼ/ɾ to select [Channel List], then press OK.
4 Use ɼ/ɾ to select the channel you want to remove, then
press OK.
Picture
Sound
Setup
Features
Language
Highlight channels for Ch Up / Down key selection.
DTV 11.1
DTV 11.2
DTV 11.3
Ch Select
OK Watch/Skip
BACK
Back
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + /
– .
• To reactivate a removed channel, use ɼ/ɾ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
5 Press MENU to exit.
Note
• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the channels that were not added
by the autoprogram due to reception conditions at the initial
setting.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Setup], then press OK.
3 Use ɼ/ɾ to select [Add Channels], then press OK.
4 Use the Number buttons to enter the number of the
channel you want to add, then press OK.
Picture
Sound
Setup
Features
Language
For analog channels, select a channel to be
added using number keys.
For digital channels, you must perform
Autoprogram function.
Add channels
Ch Change
BACK
Back
11
5 Press MENU to exit.
Note
• If setup completes successfully, [Added to the channel list] is displayed.
• If external input is used, it is not possible to register the channel and
[Unavailable] will be displayed on the TV screen.
• By using CH + / – , you can select the memorized channels only.
English
21
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Antenna ConÀ rmation
ATS C
This function lets you check the digital signal strength of each
channel.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Setup], then press OK.
3 Use ɼ/ɾ to select [Antenna], then press OK.
4 Use the Number buttons or CH + /
– to select the
channel for which you want to check the digital signal
strength.
11.1
Picture
Sound
Setup
Features
Language
Current 50 Max 50
Back
CH Ch Change
• If the channel is set to analog (cable) channel or
external input, you cannot confirm the antenna
condition.
Video
Picture
Sound
Setup
Features
Language
Indicator is available for digital
broadcasting only.
Back
CH Ch Change
5 Press MENU to exit.
Language Selection
You can choose English, Spanish, or French as your on-screen
language.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Language], then press OK.
3 Use ɼ/ɾ to select [English], [Español] or [Français], then
press OK.
Picture
Sound
Setup
Features
Language
Select your menu language.
Seleccione el idioma para el menú.
Sélectionnez la langue du menu.
English
Español
Français
4 Press MENU to exit.
Note
• If you need the English menus instead of the Spanish or French menus, press
MENU. Use ɼ/ɾ to select [Idioma] or [Langue], then press OK.
Use ɼ/ɾ to select [English], then press OK. Press MENU to exit the main
menu.
22
EN
Picture Adjustment
You can adjust picture mode, or customize the picture quality
as your preference.
Before you begin:
You must set [Home] in [Location]. ➠ p. 31
Otherwise, the settings you adjusted will not be memorized
after the unit goes to the stand-by mode.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Picture], then press OK.
3 Use ɼ/ɾ to select the item you want to adjust, then press
OK.
Picture
Sound
Setup
Features
Language
Smart Picture Personal
Brightness 30
Contrast 60
Color 36
Tint 0
Sharpness 0
Color Temperature Normal
4 Adjust the following items.
Smart Picture
Use ɼ/ɾ to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie], and [Game])
Picture
Sound
Setup
Features
Language
Smart Picture Personal
Brightness Standard
Contrast Sports
Color Movie
Tint Game
Sharpness
Color Temperature
Brightness, Contrast, Color, Tint,
Sharpness, Color Temperature
You can only adjust the following options when you set to
[Personal] in [Smart Picture ].
Use ɼ/ɾ to select the desired setting, then use ɿ/ɽ to
adjust.
Brightness
OK
Brightness 30
Adjust Move OK
Press ɾ
to decrease
brightness
Press ɼ
to increase
brightness
Contrast
OK
Contrast 60
Adjust Move OK
Press ɾ
to decrease
contrast
Press ɼ
to increase
contrast
Color
OK
Color 36
Adjust Move OK
Press ɾ
to decrease
color intensity
Press ɼ
to increase
color intensity
Tint
OK
Tint 0
Adjust Move OK
Press ɾ
to add red
Press ɼ
to add green
Sharpness
OK
Sharpness 0
Adjust Move OK
Press ɾ
to soften
Press ɼ
to sharpen
Color Temperature
OK
Color Temp. Normal
Adjust Move OK
Press ɾ
to add warm
colors
Press ɼ
to add cool
colors
5 Press MENU to exit.
Sound Adjustment
You can adjust the sound mode, equalizer and some other
sound functions.
Before you begin:
You must set [Home] in [Location]. ➠ p. 31
Otherwise, the settings you adjusted will not be memorized
after the unit goes to the stand-by mode.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Sound], then press OK.
3 Use ɼ/ɾ to select the item you want to adjust, then press
OK.
Picture
Sound
Se t u p
Features
Language
Smart Sound
Equalizer
SRS TruSurround HD
TV Speakers
Primary MTS
Standard
On
Ext. Amp
Stereo
English
23
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
4 Adjust the following items.
Smart Sound
Use ɼ/ɾ to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music], and [News])
Picture
Sound
Setup
Features
Language
Smart Sound
Equalizer
SRS TruSurround HD
TV Speakers
Primary MTS
Personal
Standard
Movie
Music
News
Equalizer
Adjust tonal quality for each frequencies. Use ɿ/ɽ to
select the speciÀ c frequency and use ɼ/ɾ to adjust the
level, then press OK.
Picture
Sound
Setup
Features
Language
0
120Hz
0
500Hz
0
1.5kHz
0
5kHz
0
10kHz
SRS TruSurround HD
This selects sound modes for more spatial or surround
sound reproduction.
Picture
Sound
Setup
Features
Language
SRS TruSurround HD™ creates an
immersive, feature-rich surround sound
experience
On
Off
On Selects available modes for surround sound.
Off Sets SRS TruSurround HD to off.
TV Speakers
Select the audio output from the unit’s speakers, or not.
If your ampliÀ er is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using
this unit’s remote control. Make sure [Fun-Link Control]
is set to [On]. ➠ p. 30
Use ɼ/ɾ to select the desired option, then press OK.
Picture
Sound
Se t u p
Features
Language
"
On":
Sound will be output from the TV
speakers.
"Off":
Sound will not be output from the TV
speakers.
"Ext. Amp":
Operation is possible by connecting to the
HDMI-CEC compatible amp with a
HDMI cable.
For details look in the user manual.
On
Off
Ext. Amp
On The sound will be output from the unit’s
speakers.
Off The sound will not be output from the
unit’s speakers.
Ext. Amp
You can control audio output from your
connected HDMI link devices by using this
unit's remote control.
Note
• We do not guarantee 100% interoperability with other brands of HDMI
link compliant devices.
Primary MTS
You can set the output mode as a default for the sound
mode (NTSC only).
This setting is not interlocked when you change the
output mode by pressing SAP. [Sound Functions] ➠ p. 17
Use ɼ/ɾ to select the desired option, then press OK.
Picture
Sound
Se t u p
Features
Language
Smart Sound
Equalizer
SRS TruSurround HD
TV Speakers
Primary MTS Stereo
Mono
SAP
Stereo Outputs stereo-audio.
Mono Outputs mono-audio.
SAP Outputs second audio program.
5 Press MENU to exit.
24
EN
Closed Caption
You can view closed captioning (CC) for TV programs,
movies and news. Closed caption refers to text of dialogue or
descriptions displayed on-screen.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Features], then press OK.
3 Use ɼ/ɾ to select [Closed Caption], then press OK.
See the following description for setting each item.
Picture
Sound
Setup
Features
Language
Caption Service O f f
Digital Caption Service O f f
Caption Style
A
B
C
A. Caption Service
A. Caption Service
4 Use ɼ/ɾ to select [Caption Service], then press OK.
5 Use ɼ/ɾ to select the desired closed caption, then press
OK.
Picture
Sound
Setup
Features
Language
Caption Service Off
Digital Caption Service CC-1
Caption Style CC-2
CC-3
CC-4
T-1
T-2
T-3
T-4
CC-1 and T-1
The primary caption and text services. The
captioning or text is displayed in the same
language as the program’s dialogue (up to
4 lines of script on the TV screen, where
it does not obstruct relevant parts of the
picture).
CC-3 and T-3
Serve as the preferred data channels.
The captioning or text is often a secondary
language.
CC-2, CC-4,
T- 2 a n d T- 4
Rarely available and broadcasters use them
only in special conditions, such as when
[CC-1] and [CC-3] or [T-1] and [T-3] are
not available.
• There are 3 display modes according to programs:
Paint-on mode Displays input characters on the TV screen
immediately.
Pop-on mode Once characters are stored in memory,
they are displayed all at once.
Roll-up mode Displays the characters continuously by
scrolling (max. 4 lines).
6 Press MENU to exit.
English
25
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
B. Digital Caption Service
B. Digital Caption Service
ATS C
In addition to the basic closed caption, DTV has its own closed
caption called digital caption service. Use this menu to change
the settings for digital caption service.
4 Use ɼ/ɾ to select [Digital Caption Service], then press
OK.
5 Use ɼ/ɾ to select the desired digital caption service, then
press OK.
Picture
Sound
Setup
Features
Language
Caption Service Off
Digital Caption Service CS-1
Caption Style CS-2
CS-3
CS-4
CS-5
CS-6
Off Select if you do not want digital caption
service.
CS-1 to CS-6
Select one of these before changing
any other item in [Closed Caption]
menu. Choose [CS-1] under normal
circumstances.
6 Press MENU to exit.
Note
• [Digital Caption Service] that you can switch differs depending on the
broadcast description.
C. Caption Style
C. Caption Style
ATS C
You can change the caption style such as font, color or size,
etc.
4 Use ɼ/ɾ to select [Caption Style], then press OK.
5 Use ɼ/ɾ to select [User Setting], then press OK.
Picture
Sound
Setup
Features
Language
User Setting O f f
Font Style Font0
Font Size Middle
Font Color White
Font Opacity Solid
Background Color Black
Background Opacity Solid
Edge Color Black
Edge Type None
6 Use ɼ/ɾ to select [On], then press OK.
7 Use ɼ/ɾ to select an item, then press OK. Then use
ɼ/ɾ to select the desired setting and press OK.
So, you must be Philip. Hi!
So, you must be Philip. Hi!
I’m pleased to meet you.
I’m pleased to meet you.
So, you must be Philip. Hi!
I’m pleased to meet you.
Background
( Background Color and Background Opacity or
Transparency)
Picture display
Edge
(Edge Color and Edge Type)
Font
( Font Style, Font Size, Font Color and Font Opacity
or Transparency)
• The setting description for each item is shown on the
next page.
• Review your setting choice made on the next page
by looking in the upper right corner of the displayed
setting box (not all selections show the differences
selected).
26
EN
Font Style
Closed Captioning font style
can be changed as illustrated.
Closed Caption
Font Size
Font size of the displayed
caption can be switched as
illustrated.
Closed Caption
Large
Middle
Small
Font Color
Font color of the displayed
caption can be switched as
illustrated.
Closed Caption
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Font Opacity
Font opacity of the displayed
caption can be switched as
illustrated.
Closed Caption
Solid
Flash
Translucent
Transparent
Background Color
Background color of the
displayed caption can be
switched as illustrated.
Closed Caption
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Background Opacity
Background opacity of the
displayed caption can be
switched as illustrated.
Closed Caption
Solid
Flash
Translucent
Transparent
Edge Color
Edge color of the displayed
caption can be switched as
illustrated.
Closed Caption
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Edge Type
Edge type of the displayed
caption can be switched as
illustrated.
Closed Caption
None
Raised
Depressed
Uniform
L. Shadow
R.Shadow
8 Press MENU to exit.
Note
• Closed caption will not be displayed when you are using an HDMI
connection.
• To show the closed caption on your TV screen, broadcast signal must
contain the closed caption data.
• Not all TV programs and commercials have the closed caption or all types
of the closed caption.
• Captions and texts may not exactly match the TV voice.
• Changing channels may delay the closed caption for a few seconds.
• Adjusting or muting the volume may delay the closed caption for a few
seconds.
• Abbreviations, symbols and other grammatical shortcuts may be used in
order to keep pace with the on-screen action. This is not a malfunction.
• The caption or text characters will not be displayed while the main menu
or functions display is shown.
• If a black box appears on the TV screen, this means that the closed caption
is set to the text mode. To clear the box, select [CC-1], [CC-2], [CC-3],
[CC-4] or [Off].
• If the unit receives poor quality television signals, the captions may contain
errors, or there might be no captions at all. Some possible causes of poor
quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen Á utter)
- Data dropout and Pixelation (for DTV only)
• The unit retains the closed caption setting if the power fails.
• When the unit receives special effects playback signal (e.g. Search, Slow
and Still) from a VCR’s video output channel (ch3 or ch4), the unit may not
display the correct caption or text.
English
27
EN
INTRODUCTION PREPARATION WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Child Lock
Child lock reads the ratings for programs, then denies access
to the programs which exceed the rating level you set. With
this function, you can block certain programs inappropriate
for children and any channels or external input modes can be
invisible.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Features], then press OK.
3 Use ɼ/ɾ to select [Child Lock], then press OK.
Picture
Sound
Setup
Features
Language
Closed Caption
Child Lock
PC settings
Fun-Link
Energy Saving Mode
Location
Current Software Info
On
Home
4 Use the Number buttons to enter the 4-digit numbers for
your PIN code.
Features
_
Enter PIN .
Language
• When you have not set up your PIN code,
enter 0, 0, 0, 0.
• When the PIN code is correct, [Child Lock] menu is
displayed.
See the following description for setting each item.
Picture
Sound
Setup
Features
Language
Channel Lock
US Movie Ratings Lock
US TV Ratings Lock
Canadian English Rating
Canadian French Rating
Region Ratings Lock
Change PIN
A
B
C
D
Note
• When you select a rating and set it to [Block], the higher ratings will be
blocked automatically. The lower ratings will be available for viewing.
• When you set the highest rating to [View], all ratings turn to [View]
automatically.
• To block any inappropriate programs, set your limits in [US Movie Ratings
Lock], [US TV Ratings Lock] and [Region Ratings Lock].
• The child lock setting will be retained after a power failure (except the PIN
code reverts to 0000).
• If the rating is blocked, will appear.
• [Region Ratings Lock] will be available when the unit receives a digital
broadcast using the new rating system.
• For the United States, the unit may download the Region Ratings Lock Table,
if required.
• The Canadian rating systems on this unit are based on CEA-766-A and
CRTC policy.
A. Channel Lock
A. Channel Lock
Particular channels or external input modes can be invisible in
this function.
5 Use ɼ/ɾ to select [Channel Lock], then press OK.
6 Use ɼ/ɾ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
Picture
Sound
Setup
Features
Language
Video
Component
HDMI1
HDMI2
P C
40.1 DTV
40.2 DTV
Select
OK View / Block
BACK
Back
7 Press MENU to exit.
B. Setting US Movie ratings
B. Setting US Movie ratings
US Movie ratings lock is the rating system created by MPAA.
5 Use ɼ/ɾ to select [US Movie Ratings Lock], then press
OK.
6 Use ɼ/ɾ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
Picture
Sound
Setup
Features
Language
X
NC-17
R
PG-13
PG
G
NR
Select
OK View / Block
BACK
Back
Rating Category
XMature audience only
NC-17 No one under 17 admitted
RRestricted; under 17 requires accompanying
parent or adult guardian
PG-13 Unsuitable for children under 13
PG Parental guidance suggested
GGeneral audience
NR No rating
7 Press MENU to exit.
Especificaciones del producto
| Marca: | Magnavox |
| Categoría: | televisor LED |
| Modelo: | 19ME360B |
¿Necesitas ayuda?
Si necesitas ayuda con Magnavox 19ME360B haz una pregunta a continuación y otros usuarios te responderán
televisor LED Magnavox Manuales
5 Septiembre 2024
5 Septiembre 2024
3 Septiembre 2024
2 Septiembre 2024
29 Agosto 2024
televisor LED Manuales
- televisor LED Sony
- televisor LED Samsung
- televisor LED LG
- televisor LED AEG
- televisor LED Philips
- televisor LED Grundig
- televisor LED Medion
- televisor LED Nokia
- televisor LED Toshiba
- televisor LED Akai
- televisor LED Alphatronics
- televisor LED AquaSound
- televisor LED Strong
- televisor LED Sharp
- televisor LED Loewe
- televisor LED Brandt
- televisor LED Telefunken
- televisor LED Funai
- televisor LED Thomson
- televisor LED OK
- televisor LED Hisense
- televisor LED Hyundai
- televisor LED Westinghouse
- televisor LED RCA
- televisor LED Blaupunkt
- televisor LED Megasat
- televisor LED Salora
- televisor LED Finlux
- televisor LED TCL
- televisor LED Terris
- televisor LED Mpman
- televisor LED Vizio
- televisor LED Orion
- televisor LED Viewsonic
- televisor LED TV STAR
- televisor LED Tecovision
- televisor LED Humax
- televisor LED Avtex
- televisor LED Odys
- televisor LED JTC
- televisor LED Reflexion
- televisor LED Axxion
- televisor LED Dantax
- televisor LED TechLine
- televisor LED Digihome
- televisor LED Prosonic
Últimos televisor LED Manuales
24 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024