Makita BO4555 Manual de Usario

Makita lijadora BO4555

Lee a continuación 📖 el manual en español para Makita BO4555 (8 páginas) en la categoría lijadora. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Finishing Sander

BO4555

BO4556

BO4557

BO4558

009089

ENGLISH (Original instructions)

SPECIFICATIONS

Model BO4555 BO4556 BO4558 BO4557

Pad size 112mm ×102mm

Orbits per minute (min

-1) 14,000

Dimensions (L x W x H)

131 mm x 112 mm x 142 mm

131 mm x 112 mm x 141 mm

131 mm x 112 mm x 137 mm

Net weight 1.1 kg 1.2 kg 1.0 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model BO4555

Sound pressure level (L

pA) : 80 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Model BO4556

Sound pressure level (L

pA) : 82 dB(A)

Sound power level (L

WA) : 93 dB(A)

Uncertainty (K) : 3 dB(A)

Model BO4557

Sound pressure level (L

pA) : 76 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Model BO4558

Sound pressure level (L

pA) : 79 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model BO4555

Work mode : sanding metal plate

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model BO4556

Work mode : sanding metal plate

Vibration emission (ah) : 3.0 m/s2

Uncertainty (K) : 1.5 m/s2

Model BO4557,BO4558

Work mode : sanding metal plate

Vibration emission (ah) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Finishing Sander

Model No./ Type: BO4555,BO4556,BO4557,BO4558

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, MK15 8JD, England

8.4.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

10. Use of power supply via a RCD with a rated

residual current of 30mA or less is always

recommended.

Especificaciones del producto

Marca:	Makita
Categoría:	lijadora
Modelo:	BO4555
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Touch
Color del producto:	Zwart
Número de niveles de potencia:	17
Pantalla incorporada:	Ja
Temporizador:	Ja
Peso.:	21000 g
Ancho:	912 mm
Profundidad:	520 mm
Altura:	51 mm
Longitud del cable:	1.1 m
Bloqueo infantil:	Ja
Peso del embalaje:	23000 g
Ancho del embalaje:	1073 mm
Empaquetadura en profundidad:	603 mm
Altura del embalaje:	126 mm
Función mantener caliente:	Ja
Tipo de material (arriba):	Glaskeramiek
Potencia quemador/zona de cocción 2:	2200 W
Potencia quemador/zona de cocción 3:	2600 W
Potencia quemador/zona de cocción 1:	2200 W
Número de quemadores/zonas de cocción:	5 zone(s)
tipo de placa:	Inductiekookplaat zones
Quemador/zona de cocción tipo 1:	Regulier
Quemador/zona de cocción tipo 2:	Regulier
Tipo de quemador/zona de cocción 3:	Groot
Número de quemadores de gas:	0 zone(s)
Número de zonas de cocción electrónicas:	5 zone(s)
Quemador normal/zona de cocción:	2600 W
Posición de control:	Boven voorzijde
Carga conectada (eléctrica):	11100 W
Quemador/zona de cocción grande:	3300 W
Interruptor encendido / apagado:	Ja
Carga conectada (gas):	0 W
Apagado automático:	Ja
Tipo temporizador:	Digitaal
Forme un quemador/zona de cocción normal:	Rechthoekig
Forme un quemador/zona de cocción grande:	Rechthoekig
Función de impulso:	Ja
Indicador de calor residual:	Ja
Número de zonas de cocción que se utilizarán simultáneamente:	5
Dimensiones (An x P) quemador normal/zona de cocción:	300 x 240 mm
Dimensiones (An x Pr) quemador/zona de cocción grande:	400 x 240 mm
reconocimiento panorámico:	Ja
Tipo de quemador/zona de cocción 4:	Regulier
Potencia quemador/zona de cocción 4:	2200 W
Fuente de alimentación quemador/zona de cocción 1:	Electrisch
Fuente de alimentación quemador/zona de cocción 2:	Electrisch
Fuente de alimentación quemador/zona de cocción 3:	Electrisch
Fuente de alimentación del quemador/zona de cocción 4:	Electrisch
Impulso de Kookzone 1:	3700 W
Impulso de Kookzone 2:	3700 W
Impulso de Kookzone 3:	3700 W
Impulso de Kookzone 4:	3700 W
Posición del quemador/zona de cocción 1:	Links achter
Diámetro quemador/zona de cocción 1:	200 mm
Posición quemador/zona de cocción 2:	Links voor
Quemador/zona de cocción diámetro 2:	200 mm
Posición quemador/zona de cocción 3:	Centraal
Posición del quemador/zona de cocción 4:	Rechts achter
Quemador/zona de cocción diámetro 4:	200 mm
Forma zona de cocción 1:	Rechthoekig
Forma zona de cocción 2:	Rechthoekig
Forma zona de cocción 3:	Rechthoekig
Forma zona de cocción 4:	Rechthoekig
Zonas combinadas:	Ja
Zona de cocción flexible:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Tipo-de-visualización:	TFT
Número de zonas de cocción flexibles:	2 zone(s)
Tamaño de la zona de cocción 3 (AnxPr):	240 x 300 mm
Fuente de alimentación del quemador/zona de cocción 5:	Electrisch
Tipo de quemador/zona de cocción 5:	Regulier
Posición del quemador/zona de cocción 5:	Rechts voor
Quemador/zona de cocción diámetro 5:	200 mm
Potencia quemador/zona de cocción 5:	2200 W
Impulso de Kookzone 5:	3700 W
Forma zona de cocción 5:	Rechthoekig