Makita DHR182ZJ Manual de Usario

Makita Hamer DHR182ZJ

Lee a continuación 📖 el manual en español para Makita DHR182ZJ (28 páginas) en la categoría Hamer. Esta guía fue útil para 18 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/28

INSTRUCTION MANUAL

Cordless Combination Hammer

DHR182

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHR182

Capacities Concrete 18 mm

Core bit 35 mm

Diamond core bit (dry type) 32 mm

Steel 13 mm

Wood 24 mm

No load speed 0 - 1,350 min-1

Blows per minute 0 - 5,000 min-1

Overall length 301 mm

Rated voltage D.C. 18 V

Net weight 2.4 - 3.2 kg

Optional accessory

Model: DX05

Suction performance 250 l/min

Operating stroke Up to 90 mm

Suitable drill bit Up to 160 mm

Net weight 0.9 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

estcombinations,accordingtoEPTA-Procedure01/2014,areshowninthetable.

Applicable battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B

• Someofthebatterycartridgeslistedabovemaynotbeavailabledependingonyourregionofresidence.

WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause

injuryand/orre.

Symbols

Thefollowingsshowthesymbolsusedfortheequip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Donotdisposeofelectricequipmentor

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

andWasteBatteriesandAccumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

Thetoolisintendedforhammerdrillinganddrillingin

brick, concrete and stone as well as for chiselling work.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN60745-2-6:

Model DHR182

Sound pressure level (L

pA):89dB(A)

Sound power level (L

WA):100dB(A)

Uncertainty(K):3dB(A)

Model DHR182 with DX05

Sound pressure level (L

pA):90dB(A)

Sound power level (L

WA):101dB(A)

Uncertainty(K):3dB(A)

NOTE:Thedeclarednoiseemissionvalue(s)has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE:Thedeclarednoiseemissionvalue(s)

may also be used in a preliminary assessment of

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

Thefollowingtableshowsthevibrationtotalvalue(tri-axialvectorsum)determinedaccordingtoapplicablestandard.

Work mode Vibration emission Uncertainty (K) Applicable

standard

Hammer drilling into concrete (a

h, HD) 11.0 m/s21.5 m/s2EN60745-2-6

Hammer drilling into concrete with DX05 (a

h, HD) 11.0 m/s21.5 m/s2EN60745-2-6

Chiselling function with side grip (a

h,Cheq) 9.0 m/s21.5 m/s2EN60745-2-6

Drilling into metal (ah, D) 2.5 m/s21.5 m/s2EN60745-2-1

NOTE:Thedeclaredvibrationtotalvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand

may be used for comparing one tool with another.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during actual use of the power tool can differ from the declared

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched off and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedriskofelec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

Especificaciones del producto

Marca:	Makita
Categoría:	Hamer
Modelo:	DHR182ZJ

¿Necesitas ayuda?

Si necesitas ayuda con Makita DHR182ZJ haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Hamer Makita Manuales

Makita DHR182ZJ Manual de Usario

6 Agosto 2024

Makita HM1512 Manual de Usario

18 Julio 2024

Hamer Manuales

Últimos Hamer Manuales

Milwaukee M18 2607-22 Manual de Usario

16 Octubre 2024

Porter-Cable PCE141 Manual de Usario

6 Octubre 2024

Black And Decker MTHD5 Manual de Usario

4 Octubre 2024

Milwaukee M18 Fuel ONE-KEY 2915-22 Manual de Usario

4 Octubre 2024

DeWalt D25263K Manual de Usario

3 Octubre 2024

Hilti TE 2000-AVR Manual de Usario

30 Septiembre 2024

DeWalt D25201K Manual de Usario

29 Septiembre 2024

Black And Decker BEH201 Manual de Usario

28 Septiembre 2024

Anova DM600 Manual de Usario

19 Septiembre 2024

DeWalt DWD520 Manual de Usario

19 Septiembre 2024