Makita TM3010CK Manual de Usario
Makita
Multiherramienta
TM3010CK
Lee a continuación 📖 el manual en español para Makita TM3010CK (12 páginas) en la categoría Multiherramienta. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Multi Tool
TM3010C
013851
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model TM3010C
Oscillation per minute 6,000 - 20,000 (min
-1)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Overall length 283 mm
without dust extraction attachment
1.6 kg
Net weight
with dust extraction attachment
1.7 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Work mode: Sanding
Sound pressure level (L
pA) : 80 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 80 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with segment saw blade
Sound pressure level (L
pA) : 79 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Scraping
Sound pressure level (L
pA) : 82 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : sanding
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode : cutting with plunge cut saw blade
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : cutting with segment saw blade
Vibration emission (ah) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : scraping
Vibration emission (ah) : 5.0 m/s2
Uncertainty (K) : 1.5 m/s2
3
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Multi Tool
Model No./ Type: TM3010C
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Especificaciones del producto
| Marca: | Makita |
| Categoría: | Multiherramienta |
| Modelo: | TM3010CK |
¿Necesitas ayuda?
Si necesitas ayuda con Makita TM3010CK haz una pregunta a continuación y otros usuarios te responderán
Multiherramienta Makita Manuales
9 Octubre 2024
29 Septiembre 2024
8 Septiembre 2024
17 Agosto 2024
12 Agosto 2024
9 Agosto 2024
8 Agosto 2024
6 Agosto 2024
2 Agosto 2024
27 Julio 2024
Multiherramienta Manuales
- Multiherramienta Bosch
- Multiherramienta AEG
- Multiherramienta DeWalt
- Multiherramienta Ferm
- Multiherramienta Ozito
- Multiherramienta Gude
- Multiherramienta Black And Decker
- Multiherramienta Vonroc
- Multiherramienta Skil
- Multiherramienta Hilti
- Multiherramienta Ryobi
- Multiherramienta Taurus
- Multiherramienta Metabo
- Multiherramienta Parkside
- Multiherramienta Worx
- Multiherramienta Meec Tools
- Multiherramienta Milwaukee
- Multiherramienta Extech
- Multiherramienta Einhell
- Multiherramienta Baumr-AG
- Multiherramienta Powerplus
- Multiherramienta Stiga
- Multiherramienta Porter-Cable
- Multiherramienta Cotech
- Multiherramienta Powerfix
- Multiherramienta Bavaria
- Multiherramienta Lezyne
- Multiherramienta Toolcraft
- Multiherramienta Proxxon
- Multiherramienta Leatherman
- Multiherramienta Fein
- Multiherramienta Robust
- Multiherramienta Ergotools Pattfield
- Multiherramienta McKenzie
- Multiherramienta G-Technology
- Multiherramienta CMT Orange Tools
- Multiherramienta Donau Elektronik
Últimos Multiherramienta Manuales
27 Octubre 2024
21 Octubre 2024
15 Octubre 2024
14 Octubre 2024
8 Octubre 2024
8 Octubre 2024
4 Octubre 2024
22 Septiembre 2024
21 Septiembre 2024
18 Septiembre 2024